Electrohydrodynamic (EHD) printing has been considered as a mature strategy to mimic the hierarchical microarchitectures in native extracellular matrix (ECM). Most of the EHD-printed scaffolds possess single-dimensional fibrous structures, which cannot mimic the multi-dimensional architectures for enhanced cellular behaviors. Here we developed a two-nozzle EHD printing system to fabricate hybrid scaffolds involving submicron and microscale features. The polyethylene oxide- polycaprolactone (PEO-PCL) submicron fibers were fabricated via solution-based EHD printing with a width of 527 ± 56 nm. The PCL microscale fibers were fabricated via melt-based EHD printing with a width of 11.2 ± 2.3 μm. The hybrid scaffolds were fabricated by printing the submicron and microscale fibers in a layer-by-layer manner. The microscale scaffolds were utilized as a control group. Rat myocardial cells (H9C2 cells) were cultured on the two kinds of scaffolds for the culturing period of 1, 3 and 5 d. Biological results indicated that H9C2 cells showed enhanced adhesion and proliferation behaviors on the hybrid scaffold than those on the pure microscale scaffold. This work offers a facile and scalable strategy to fabricate multiscale synthetic scaffolds, which might be further explored to regulate cellular behaviors in the fields of tissue regeneration and biomedical engineering.
Three-dimensional (3D) printing has been widely utilized to fabricate free-standing electrodes in energy-related fields. In terms of fabrication, the two most challenging limitations of 3D printed electrodes are the poor printing resolution and simple structural dimension. Here we proposed a novel process to fabricate molybdenum disulfide-polyvinylidene fluoride (MoS2-PVDF) hierarchical electrodes for energy storage applications. The 20-layer microscale PVDF films with a stable fiber width of 8.3 ± 1.2 μm were fabricated by using electrohydrodynamic (EHD) printing. MoS2 nanostructures were synthesized and assembled on the microscale PVDF fibers by using hydrothermal crystal growth. The structural and material investigations were conducted to demonstrate the geometrical morphology and materials component of the composite structure. The electrochemical measurements indicated that the MoS2-PVDF electrodes exhibited the typical charge-discharge performance with a mass specific capacitance of 60.2 ± 4.5 F/g. The proposed method offers a facile and scalable approach for the fabrication of high-resolution electrodes, which might be further developed with enhanced specific capacitance in energy storage fields.
4 November 2024 in Journal of Mechanical Science and Technology