Yue Sun

Ms. Yue Sun

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Han-Jui ChangHan-Jui Chang
Han-Jui Chang
SLShuzhou LU
Shuzhou LU
YSYue Sun
Yue Sun
GZGuangyi Zhang
Guangyi Zhang
LRLongshi Rao
Longshi Rao
Injection molding process parameters have a great impact on plastic production quality, manufacturing cost, and molding efficiency. This study proposes to apply the method of Latin hypercube sampling, and to combine the response surface model and “Constraint Generation Inverse Design Network (CGIDN)” to achieve multi-objective optimization of the injection process, shorten the time to find the optimal process parameters, and improve the production efficiency of plastic parts. Taking the LSR lens array of automotive LED lights as the research object, the residual stress and volume shrinkage were taken as the optimization objectives, and the filling time, melt temperature, maturation time, and maturation pressure were taken as the influencing factors to obtain the optimization target values, and the response surface models between the volume shrinkage rate and the influencing factors were established. Based on the “Constraint-Generated Inverse Design Network”, the optimization was independently sought within the set parameters to obtain the optimal combination of process parameters to meet the injection molding quality of plastic parts. The results showed that the optimal residual stress value and volume shrinkage rate were 11.96 MPa and 4.88%, respectively, in the data set of 20 Latin test samples obtained based on Latin hypercube sampling, and the optimal residual stress value and volume shrinkage rate were 8.47 MPa and 2.83%, respectively, after optimization by the CGIDN method. The optimal process parameters obtained by CGIDN optimization were a melt temperature of 30 °C, filling time of 2.5 s, maturation pressure of 40 MPa, and maturation time of 15 s. The optimization results were obvious and showed the feasibility of the data-driven injection molding process optimization method based on the combination of Latin hypercube sampling and CGIDN.

31 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Han-Jui ChangHan-Jui Chang
Han-Jui Chang
SLShuzhou LU
Shuzhou LU
YSYue Sun
Yue Sun
RWRui Wang
Rui Wang
This study aimed to improve the injection molding quality of LSR material lenses by optimizing the process parameters. To achieve this goal, we employed the population-based optimization algorithm NSGA-III, which can simultaneously optimize multiple objective functions and identify an equilibrium point among them, thereby reducing the time required to find the optimal process parameters. We utilized analysis software to simulate the injection molding process of LSR material lenses, with a specific focus on examining the relationship between tie bar elongation and the optimized process parameters. During the study, we intentionally varied key process parameters, including the melt temperature, holding pressure, and holding time, to analyze their impact on the residual stress of the final product. In order to investigate the intricate relationship between the tie bar yield, injection molding process parameters, and lens residual stress, we installed strain sensors on the tie bar to continuously monitor changes in clamping force throughout the injection molding process. The experimental results showed that both the tie bar force and mold cavity pressure exerted significant influence on residual stresses. By applying the NSGA-III algorithm for optimization, we successfully determined the optimal process parameters, which included a melt temperature of 34.92 °C, a holding pressure of 33.97 MPa, and a holding time of 9.96 s. In comparison to the initially recommended process parameters during the design phase, the optimized parameters led to reductions of 12.98% in clamping force and 47.14% in residual stress. Furthermore, the average transmittance of the actual product remained within the range of 95–98%. In summary, this approach not only enables the prediction of the lens’s residual stress trends based on the tie bar elongation, but also leads to a substantial enhancement of lens quality, characterized by reduced residual stress and improved transmittance through the optimization of process parameters. This methodology can serve as a valuable guide for optimizing real-world injection molding processes.

14 August 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Han-Jui ChangHan-Jui Chang
Han-Jui Chang
YSYue Sun
Yue Sun
RWRui Wang
Rui Wang
SLShuzhou LU
Shuzhou LU
The Fresnel lens is an optical system consisting of a series of concentric diamond grooves. One surface of the lens is smooth, while the other is engraved with concentric circles of increasing size. Optical interference, diffraction, and sensitivity to the angle of incidence are used to design the microstructure on the lens surface. The imaging of the optical surface depends on its curvature. By reducing the thickness of the lens, light can still be focused at the same focal point as with a thicker lens. Previously, lenses, including Fresnel lenses, were made of glass due to material limitations. However, the traditional grinding and polishing methods for making Fresnel lenses were not only time-consuming, but also labour-intensive. As a result, costs were high. Later, a thermal pressing process using metal moulds was invented. However, the high surface tension of glass caused some detailed parts to be deformed during the pressing process, resulting in unsatisfactory Fresnel lens performance. In addition, the complex manufacturing process and unstable processing accuracy hindered mass production. This resulted in high prices and limited applications for Fresnel lenses. These factors prevented the widespread use of early Fresnel lenses. In contrast, polymer materials offer advantages, such as low density, light weight, high strength-to-weight ratios, and corrosion resistance. They are also cost effective and available in a wide range of grades. Polymer materials have gradually replaced optical glass and other materials in the manufacture of micro-optical lenses and other miniaturised devices. Therefore, this study focuses on investigating the manufacturing parameters of Fresnel lenses in the injection moulding process. We compare the quality of products obtained by two-stage injection moulding, injection compression moulding, and IMD (in-mould decoration) techniques. The results show that the optimal method is IMD, which reduces the nodal displacement on the Fresnel lens surface and improves the transmission performance. To achieve this, we first establish a Kriging model to correlate the process parameters with optimisation objectives, mapping the design parameters and optimisation objectives. Based on the Kriging model, we integrate the NSGA-II algorithm with the predictive model to obtain the Pareto optimal solutions. By analysing the Pareto frontier, we identify the best process parameters. Finally, it is determined that the average nodal displacement on the Fresnel surface is 0.393 mm, at a holding pressure of 320.35 MPa and a melt temperature of 251.40 °C. Combined with IMD technology, product testing shows a transmittance of 95.43% and an optimisation rate of 59.64%.

25 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Han-Jui ChangHan-Jui Chang
Han-Jui Chang
SLShuzhou LU
Shuzhou LU
YSYue Sun
Yue Sun
GZGuangyi Zhang
Guangyi Zhang
LRLongshi Rao
Longshi Rao
The residual stress phenomenon in the injection process of an optical lens affects the quality of optical components, and the refractive error caused by geometric errors is the most serious, followed by the degradation of the accuracy and function of optical components. It is very important to ensure that the lens geometry remains intact and the refractive index is low. Therefore, a parameter design method for an optical liquid silicon injection molding was proposed in this study. Wavelet analysis was applied to the noise reduction and feature extraction of the cavity pressure/pressure retaining curve of the injection molding machine, and multiple identifiable performance evaluation methods were used to identify and optimize the parameters of the molding process. Taking an automotive LED lens as an example, Moldex3D simulation software was used to simulate the molding of an LED lens made of LSR material, and two key injection molding factors, melt temperature and V/P switching point, were analyzed and optimized. In this paper, the transmittance and volume shrinkage of LED lenses are taken as quality indexes, and parameters are optimized by setting different V/P switching points and melt temperature schemes. The experimental results show that the residual stress is negatively correlated with transmittance, and the higher the residual stress, the lower the transmittance. Under the optimum process parameters generated by this method, the residual stress of plastic parts is significantly optimized, and the optimization rate is above 15%. In addition, when the V/P switching point is 98 and the melt temperature is 30 °C, the product quality is the best, the volume shrinkage rate is the smallest, and the size is 2.895%, which also means that the carbon emissions are the lowest.

26 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Han-Jui ChangHan-Jui Chang
Han-Jui Chang
GZGuangyi Zhang
Guangyi Zhang
YSYue Sun
Yue Sun
SLShuzhou LU
Shuzhou LU
In this paper, a node detection method is proposed for the detection of battle damage to armor. This experiment uses the special nature of the film to virtualize the surface of the armor IMD film coverage. The die index is a large area and is easy to damage, but with the use of a unique IMD film stamping die, the possibility of damage decreases, which provides a damage prediction function for the armor. In addition, for the damaged armor, the same method can be used to detect because the damaged part more easily causes the surface film to rupture after being impacted, so it is possible to optimize the design of the armor and the molding through the die index. The die index can also detect the degree of damage to the damaged part of the damaged armor. Therefore, the IMD die index is introduced to quantify the data, and the degree of damage is judged by the IMD die index. The novelty of this work is that each node can efficiently detect the vulnerable damage position of the armor using the die index and then pass through the COMSOL. The Johnson–Cook stress model simulates the battle loss, obtains the stress deformation that occurs after the battle loss, and verifies the experiment by comparing the results obtained. Finally, the repair method is used to repair all the predicted battle damage parts based on additive manufacturing to ensure that they can be used again after repair.

23 June 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
Han-Jui ChangHan-Jui Chang
Han-Jui Chang
YSYue Sun
Yue Sun
SLShuzhou LU
Shuzhou LU
GZGuangyi Zhang
Guangyi Zhang