In order to enhance the development efficiency of thick and complex carbonate reservoirs in the Middle East, a case study was conducted on M oilfield in Iraq. This study focused on reservoir characterization, injection-production modes, well pattern optimization, and other related topics. As a result, key techniques for the high-efficiency development of thick carbonate reservoirs were established. The research findings include the following: (1) the discovery of hidden “low-velocity” features within the thick gypsum-salt layer, which led to the development of a new seismic velocity model; (2) the differential dissolution of grain-supported limestones is controlled by lithofacies and petrophysical properties, resulting in the occurrence of “porphyritic” phenomena in core sections. The genetic mechanism responsible for reversing petrophysical properties in dolostones is attributed to “big hole filling and small hole preservation” caused by dense brine refluxing; (3) fracture evaluation technology based on anisotropy and dipole shear wave long-distance imaging was developed to address challenges associated with quantitatively assessing micro-fractures; (4) through large-scale three-dimensional physical models and numerical simulations, it was revealed that water–oil displacement mechanisms involving “horizontal breakthrough via hyper-permeability” combined with vertical differentiation due to gravity occur in thick and heterogeneous reservoirs under spatial injection-production modes; (5) a relationship model linking economic profit with well pattern density was established for technical service contracts in the Middle East. Additionally, an innovative stepwise conversion composite well patterns approach was introduced for thick reservoirs to meet production ramp-up requirements while delaying water cut rise; (6) a prediction technology for the oilfield development index, considering asphaltene precipitation, has been successfully developed. These research findings provide robust support for the efficient development of the M oilfield in Iraq, while also serving as a valuable reference for similar reservoirs’ development in the Middle East.

In practical oilfield production, the phenomenon of water influx typically shortens the water-free recovery period of wells, leading to water flooding and causing a sharp decline in the production well yields, bringing great harm to production. Water invasion usually occurs as a result of the elastic expansion of the water as well as the compaction of the aquifer pore space. However, it can be due to the special characteristics of fractured-vuggy reservoirs such as non-homogeneity and the discrete distribution of the pore spaces. It is challenging to use traditional seepage flow theories to analyze the characteristics of water influx. Also, reservoir numerical simulation methods require numerous parameters which are difficult to obtain, which significantly reduces the accuracy of the results. In this study, considering the driving energy for water influx, a water influx characteristic model was obtained by fitting a graph plate. Subsequently, an iterative calculation method was used to simultaneously obtain water influx volume and OOIP. The aquifer to hydrocarbon ratio was determined by fitting the water influx curve with the graphic plate. Results show that the calculation method is sensitive to the values of reservoir pressure and the crude oil formation volume factor. After applying the method to one field case, it was discovered that water influx performance can be characterized into two types, i.e., linear water influx and logarithmic water influx. In the early stages, the water influx rate of logarithmic water influx is greater compared to linear water influx. However, the volume and energy of waterbody are limited, and the water invasion phenomenon occurs almost exclusively within a short period after the invasion. On the other hand, the volume of waterbody invaded by linear water influx is larger, and it can maintain a stable rate of water influx. The results of the study can provide theoretical support for the waterbody energy evaluation and dynamic analysis of water influx, as well as the control and management of water in these types of reservoirs.

Flue gas flooding has been applied in many oilfields for its accessibility and low cost. However, the problem of gas channeling during flue gas flooding is significantly more serious due to reservoir heterogeneity and gravity override, and the traditional profile control agent is inapplicable because of flue gas acidity. In order to solve this challenge, a novel acidic nanoparticle was presented first; then, the profile control performance of both water slugs and this novel nanoparticle for flue gas flooding in heterogeneous reservoirs was studied using core samples with different rhythms. The results show that the stability of the acidic nanoparticles is good, and the viscosity of the nanoparticle solution increases as the pH decreases, which is suitable for acidic flue gas flooding. The oil recovery of flue gas flooding in a positive rhythm core is 5–10% greater than that in a reverse rhythm core. The water slug can improve oil recovery by 5% in the reverse rhythm core, and oil recovery was less than 2% in the positive rhythm core. The effect of a nanoparticle slug is much better than the water slug. It improved the oil recovery by 10% in the positive rhythm core by continuing flue gas flooding after nanoparticle slug treatment, which was more than the 20% in the reverse rhythm core. The ultimate oil recovery of both positive and reverse-rhythm cores by acidic nanoparticle slug treatment was around 50%, which was 10% greater than the water slug treatment. The conformance control using acidic nanoparticles is more suitable for reverse rhythm formation due to its plugging capacity, deformation characteristic, and viscosity increment in an acidic environment. This research demonstrated that these novel acidic nanoparticles could be effectively applied to conformance control during flue gas flooding in heterogeneous reservoirs.

Pan-connected interlayers are widely present in oil reservoirs, forming flow channels at different positions. However, conventional profile control agents struggle to plug deep interlayer channels in reservoirs, limiting the swept volume of injected water. Additionally, a clear methodology for physically simulating pan-connected reservoirs with interlayer channels and calculating interchannel flow rates remains lacking. In this study, a physical model of pan-connected interlayer reservoirs was constructed to carry out deformable gel particles (DGPs) plugging experiments on interlayer channels. A mass conservation-based flow rate calculation method for interlayer channels with iterative solution was proposed, revealing the variation law of interlayer channel flow rates during DGP injection and subsequent water flooding. Finally, oil displacement and DGP profile control experiments in pan-connected interlayer reservoirs were conducted. The study shows that during DGP injection, injected water enters the potential layer through interlayer channels in the middle and front of the water-channeling layer and bypasses back to the water-channeling layer through channels near the production well. With the increase in DGP injection volume, the flow rate of each channel increases. During subsequent water flooding, DGP breakage leads to a rapid decline in its along-path plugging capability, so water bypasses back to the water-channeling layer from the potential layer through all interlayer channels. As the DGP injection volume increases, the flow rate of each channel decreases. Large-volume DGPs can regulate interlayer channeling reservoirs in the high water cut stage. Its effectiveness mechanism involves particle migration increasing the interlayer pressure difference, which drives injected water to sweep from the water-channeling layer to the potential layer through interlayer channels, improving oil recovery by 19.74%. The flow characteristics of interlayer channels during DGP injection play a positive role in oil displacement, so the oil recovery degree in this process is greater than that in the subsequent water flooding stage under each injection volume condition. The core objective of this study is to investigate the plugging mechanism of DGPs in pan-connected interlayer channels of high-water-cut reservoirs, establish a method to quantify interlayer flow rates, and reveal how DGPs regulate flow redistribution to enhance oil recovery.