We present the NEFOCAST project (named by the contraction of “Nefele”, which is the Italian spelling for the mythological cloud nymph Nephele, and “forecast”), funded by the Tuscany Region, about the feasibility of a system for the detection and monitoring of precipitation fields over the regional territory based on the use of a widespread network of new-generation Eutelsat “SmartLNB” (smart low-noise block converter) domestic terminals. Though primarily intended for interactive satellite services, these devices can also be used as weather sensors, as they have the capability of measuring the rain-induced attenuation incurred by the downlink signal and relaying it on an auxiliary return channel. We illustrate the NEFOCAST system architecture, consisting of the network of ground sensor terminals, the space segment, and the service center, which has the task of processing the information relayed by the terminals for generating rain field maps. We discuss a few methods that allow the conversion of a rain attenuation measurement into an instantaneous rainfall rate. Specifically, we discuss an exponential model relating the specific rain attenuation to the rainfall rate, whose coefficients were obtained from extensive experimental data. The above model permits the inferring of the rainfall rate from the total signal attenuation provided by the SmartLNB and from the link geometry knowledge. Some preliminary results obtained from a SmartLNB installed in Pisa are presented and compared with the output of a conventional tipping bucket rain gauge. It is shown that the NEFOCAST sensor is able to track the fast-varying rainfall rate accurately with no delay, as opposed to a conventional gauge.

In the last few years, the number of worldwide operational X-band weather radars has rapidly been growing, thanks to an established technology that offers reliability, high performance, and reduced efforts and costs for installation and maintenance, with respect to the more widespread C- and S-band systems. X-band radars are particularly suitable for nowcasting activities, as those operated by the LaMMA (Laboratory of Monitoring and Environmental Modelling for the sustainable development) Consortium in the framework of its institutional duties of operational meteorological surveillance. In fact, they have the capability to monitor precipitation, resolving very local scales, with good spatial and temporal details, although with a reduced scanning range. The Consortium has recently installed a small network of X-band weather radars that partially overlaps and completes the existing national radar network over the north Tyrrhenian area. This paper describes the implementation of this regional network, detailing the aspects related with the radar signal processing chain that provides the final reflectivity composite, starting from the acquisition of the signal power data. The network performances are then qualitatively assessed for three case studies characterised by different precipitation regimes and different seasons. Results are satisfactory especially during intense precipitations, particularly regarding what concerns their spatial and temporal characterisation.

In situ measurements of precipitation are typically obtained by tipping bucket or weighing rain gauges or by disdrometers using different measurement principles. One of the most critical aspects of their operational use is the calibration, which requires the characterization of instrument responses both in laboratory and in real conditions. Another important issue with in situ measurements is the coverage. Dense networks are desirable, but the installation and maintenance costs can be unaffordable with most of the commercial conventional devices. This work presents the development of a prototype of an impact rain gauge based on a very low-cost piezoelectric sensor. The sensor was developed by assembling off-the-shelf and reused components following an easy prototyping approach; the calibration of the relationship between the different properties of the voltage signal, as sampled by the rain drop impact, and rainfall intensity was established using machine-learning methods. The comparison with 1-minute rainfall obtained by a co-located commercial disdrometer highlights the fairly good performance of the low-cost sensor in monitoring and characterizing rainfall events.

In 2021, a group of seven Italian institutions decided to bring together their know-how, experience, and instruments for measuring the drop size distribution (DSD) of atmospheric precipitation, giving birth to the Italian Group of Disdrometry (in Italian named Gruppo Italiano Disdrometria, GID, https://www.gid-net.it/, last access: 16 May 2023). GID has made freely available a database of 1 min records of DSD collected by the disdrometer network along the Italian peninsula. At the time of writing, the disdrometer network was composed of eight laser disdrometers belonging to six different Italian institutions (including research centres, universities, and environmental regional agencies). This work aims to document the technical aspects of the Italian DSD database consisting of 1 min sampling data from 2012 to 2021 in a uniform standard format defined within GID. Although not all the disdrometers have the same data record length, the DSD data collection effort is the first of its kind in Italy, and from here onwards, it opens up new opportunities in the surface characterization of microphysical properties of precipitation in the perspective of climate records and beyond. The Version 01 GID database can be downloaded at https://doi.org/10.5281/zenodo.6875801 (Adirosi et al., 2022), while Version 02 can be downloaded at https://doi.org/10.5281/zenodo.7708563 (Adirosi et al., 2023). The difference among the two versions is the diameter–fall velocity relation used for the DSD computation.