Ahmad Raja Abded Al

Mrs. Ahmad Raja Abded Al

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
SKSamir Khrais
Samir Khrais
HHHadeel Al Hmoud
Hadeel Al Hmoud
Ahmad Raja Abded AlAhmad Raja Abded Al
Ahmad Raja Abded Al
Tariq Taha DarabsehTariq Taha Darabseh
Tariq Taha Darabseh
This study investigates the impact of gas metal arc welding (GMAW) parameters on the bead geometry and material distortion of AISI 316L. Three parameters—arc current in ampere (A), filler feed rate (m/min), and gas composition—were modified at varying levels in order to examine their effects. This study sheds new light on MAG welding lines’ physical properties and behavior and highlights the influence of quaternary shielding gas compositions. Taguchi analysis, which includes signal-to-noise (S/N) ratio and analysis of variance (ANOVA), was utilized to analyze and optimize the welding parameters. This study found that arc current significantly impacts bead geometry, while the shielding gas composition has the most significant effect on angular distortion and transverse shrinkage. The optimal welding parameters for achieving the best bead height and width are 160 A, 3.5 m/min, G1, with a bead height of 4.89 mm, and 120 A, 3 m/min, G2, with a bead width of 6.69 mm. Moreover, the optimal welding parameters for minimizing both angular distortion and transverse shrinkage are 120 A, 4 m/min, G2, resulting in an angular distortion value of 0.0042° and a transverse shrinkage value of 0.0254 mm. This research has practical implications for improving welding performance and can contribute to the advancement of MAG and MIG welding in manufacturing applications.

1 January 2024 in Materials Research Express
Verified
Journal Article
Open access
SKSamir Khrais
Samir Khrais
AMAwsan Mohammed
Awsan Mohammed
Ahmad Raja Abded AlAhmad Raja Abded Al
Ahmad Raja Abded Al
Tariq Taha DarabsehTariq Taha Darabseh
Tariq Taha Darabseh
The AISI 316 L stainless steel was welded using Tungsten Inert Gas (TIG) welding, utilizing ternary shielding gases Argon (Ar), Helium (He), and Nitrogen (N2). This study aimed to assess the effects of these ternary shielding gases on the microstructure, bead profile, and bead appearance. It provides a comprehensive grasp of welding parameters’ interplay with shielding gas compositions, enabling engineers to make informed choices that significantly influence the excellence, productivity, and lastingness of the welding process. The Taguchi L-27 approach was employed, incorporating different contents of N2 (2.5 vol. % to 7.5 vol. %) and He (10 vol. % to 30 vol. %) within the Ar shielding gas composition. Additionally, welding current intensities, ranging from 120 A to 180 A, were also used in the experiment. The results demonstrated that higher content of He and N2 resulted in elevated levels of austenite-forming elements. Therefore, for TIG welding at the arc current intensity of 150 A, it is recommended to utilize the shielding gas mixtures (2.5 vol. % N2 + 10 vol. % He + 87.5 vol. % Ar). Furthermore, by augmenting the content of both N2 and He within the Ar shielding gas mixture, in addition to adjusting the arc current, a notable expansion in both the width and depth of the weld profile was achieved. This achievement, in turn, played a pivotal role in securing comprehensive fusion throughout the welding process.

1 April 2024 in Materials Research Express
Verified
Journal Article
Open access
SKSamir Khrais
Samir Khrais
HHHadeel Al Hmoud
Hadeel Al Hmoud
Ahmad Raja Abded AlAhmad Raja Abded Al
Ahmad Raja Abded Al
Tariq Taha DarabsehTariq Taha Darabseh
Tariq Taha Darabseh
In this study, the parameters of Metal Inert Gas (MIG) and Metal Active Gas (MAG) were investigated of AISI 316L/ER 316L. A quaternary shielding gas mixture consisting of Argon (Ar), Helium (He), Carbon Dioxide (CO2), and Nitrogen (N2) was chosen. The Taguchi orthogonal array (OA-L9) methodology was employed to explore optimal welding settings, including arc current (120A, 160A, 200A), wire feed rate (3, 3.5, 4 m min−1), and shielding gas combination (G1, G2, G3). The findings highlighted the importance of shielding gas in influencing the ultimate tensile strength (UTS), elongation percentage (EL%), and material toughness of welding joints. Notably, the highest UTS (515.77 MPa), EL% (20.85%), and material toughness (133J) were achieved by the specific group gas combination shown as G1. It is recommended to configure welding parameters to an arc current of 160A, a wire feed rate of 4 m min−1, and the G1 gas combination. Welded specimens using a G1 gas mixture showcased the best UTS and EL%. Additionally, it was found that the fusion zone (FZ) and heat-affected zone (HAZ) hardness are most profoundly influenced by the choice of gas combination (G2), resulting in the best hardness values of 253.79 HV and 239.68 HV, respectively. The optimal parameters for achieving the desired material hardness were precisely identified as (120A, 3 m min−1, G2). These insights offer a pathway to enhance welding performance and, in turn, elevate the quality and efficiency of industrial applications.

Verified
Journal Article
Open access
PDF file
SKSamir Khrais
Samir Khrais
Tariq Taha DarabsehTariq Taha Darabseh
Tariq Taha Darabseh
AMAwsan Mohammed
Awsan Mohammed
Ahmad Raja Abded AlAhmad Raja Abded Al
Ahmad Raja Abded Al
Adding hydrogen (H2) to shielding gas in Tungsten Inert Gas (TIG) welding has garnered attention for its potential to enhance weld quality. This study explores the effects of H2 and helium (He) content on AISI 316L stainless steel welding, focusing on their influence on weld bead geometry, microstructural properties, and mechanical properties. The H2 (1.5%, 3%, 4.5%) and He (10%, 20%, 30%) concentrations were evaluated in a shielding gas primarily composed of argon (Ar). The study underscores the need for precise gas blend control to balance enhanced performance with material safety. These findings offer insights into optimizing welding parameters for AISI 316L, with implications for broader applications in industries demanding high quality. The result shows that H2 (1.5–3.0%) improves penetration, geometry, and surface finish, while He (10–20%) enhances arc stability and smoothness; however, excessive levels of H2 (>4.5%) cause defects. Optimal mechanical properties (UTS: 714.54 MPa, YS: 449.03 MPa, hardness: 93.34 HRB, impact toughness: 34.45 J) are achieved with 3% H2, 30% He, and 150 A arc current.