Music is important in everyday life, and music therapy can help treat a variety of health issues. Music listening is a technique used by music therapists in various clinical treatments. As a result, music therapists must have an intelligent system at their disposal to assist and support them in selecting the most appropriate music for each patient. Previous research has not thoroughly addressed the relationship between music features and their effects on patients. The current paper focuses on identifying and predicting whether music has therapeutic benefits. A machine learning model is developed, using a multi-class neural network to classify emotions into four categories and then predict the output. The neural network developed has three layers: (i) an input layer with multiple features; (ii) a deep connected hidden layer; (iii) an output layer. K-Fold Cross Validation was used to assess the estimator. The experiment aims to create a machine-learning model that can predict whether a specific song has therapeutic effects on a specific person. The model considers a person’s musical and emotional characteristics but is also trained to consider solfeggio frequencies. During the training phase, a subset of the Million Dataset is used. The user selects their favorite type of music and their current mood to allow the model to make a prediction. If the selected song is inappropriate, the application, using Machine Learning, recommends another type of music that may be useful for that specific user. An ongoing study is underway to validate the Machine Learning model. The developed system has been tested on many individuals. Because it achieved very good performance indicators, the proposed solution can be used by music therapists or even patients to select the appropriate song for their treatment.

This article describes the design and development of the NI myRIO device-based remote laboratory. The cloud-based, expandable, and reconfigurable remote laboratory is intended to give students access to an online web-based user interface to perform experiments. Multiple myRIO devices are programmed to host several experiments each. A finite state machine is used to select specific experiments, while a single state can contain several. The laboratory web virtual instruments interfaces are hosted on the SystemLink cloud and SystemLink server. A user-friendly interface has been designed to help students to understand important electronic concepts. Virtual and real experiments were fused to give students a wide range of experiments they can access online. The instructor can check outputs of an experiment being executed on the device. Achieving connection between myRIO and SystemLink through global variables and SystemLink ensured that the low-cost device was utilized, and this is suitable for third-world countries’ universities that cannot afford expensive equipment. Students can perform the experiments which have some resemblance to physical execution. The system is expandable in that the number of myRIO devices or number of experiments can be increased to suit changing requirements. The reconfigurability of the system is such that the finite state machine-based coding technique permits only one experiment to be selected, configure the system, and run while other experiments are idle.

Thanks to the recent rapid technological advancement in IoT usage, there is a need for students to learn IoT-based concepts using a dedicated experimental platform. Furthermore, being forced into remote learning due to the ongoing COVID-19 pandemic, there is an urgent need for innovative learning methods. From our perspective, a learning platform should be reconfigurable to accommodate multiple applications and remotely accessible at any time, from anywhere, and on any connected device. Considering that many of the university courses are now held online, the reliability and scalability of the system become critical. This paper presents the design and development of a wireless configurable myRIO-based sensor node that connects to SystemLink Cloud. The sensors that were used are for ambient light, temperature, and proximity. A graphical programming environment (G-LabVIEW) and related APIs were used for rapid concept-to-development process. Distinct applications have been developed for the instructor and students, respectively. The students can select which sensor and application to run on the system and observe the measurements on the local student’s application or the cloud platform at a specific moment. They can also read the data on the cloud platform and use them in their LabVIEW application. In the context of remote education, we strongly believe that this platform is and will be suitable for the COVID and Post-COVID eras as well because it creates a much better remote laboratory experience for students. In conclusion, the system that was developed is innovative because it is software reconfigurable from the device, from the instructor’s application and cloud via a web browser, it is intuitive, and it has a user-friendly interface. It meets most of the necessary requirements in the current era, being also highly available and scalable in the cloud.

This paper presents an overview and the results of a Field Programmable Gate Array (FPGA) based real-time simulation of a Switched Reluctance Motor (SRM) drive system, designed for light EV applications. The analysis is ran on a Kintex-7 FPGA using an R series board from National Instruments. The real time simulation model is designed in LabVIEW FPGA and uploaded on the R series board to perform accurate and high speed simulations of the machine. The advanced SRM hybrid model includes look-up tables and mathematical equations, describing the real model with high fidelity. The results of the analysis are validated by results based on offline simulation which proves the benefits of such real-time simulations and also validates the performances of the machine.

To address global warming challenges, industry, transportation, residential, and other sectors must adapt to reduce the greenhouse effect. One promising solution is the use of renewable energy and energy-saving mechanisms. This paper analyzes several renewable energy sources and storage systems, taking into consideration the possibility of integrating them with smart homes. The integration process requires the development of smart home energy management systems coupled with renewable energy and energy storage elements. Furthermore, a real-life solar energy power plant composed of programmable components was designed and mounted on the roof of a single-family residential building. Based on a long-term analysis of its operation, the main advantages and disadvantages of the proposed implementation solution are highlighted, exemplifying the concepts presented in the paper. Being composed of programmable components, which allow the implementation of custom algorithms and monitoring applications to optimize its operation, the system will be used as a prototyping platform in future research. The evaluation of the developed system over a period of one year showed that, even when using a basic implementation such as the one in this paper, significant savings regarding a household’s energy consumption can be achieved (36% of the energy bought from the supplier, meaning EUR 545 from a total of EUR 1497). Finally, based on the analysis of the developed prototype system, the main technical challenges that must be addressed in the future to efficiently manage renewable energy storage and use in today’s smart homes were identified.

This paper presents the importance of finding the suitable configurations for Artificial Intelligence and Machine Learning algorithms and correct data preprocessing for a waveform problem. In the Artificial Intelligence and Machine Learning area, this step is one of the most important and it influences the performance result of the model. The experiments of different configurations were done using National Instruments Automated Machine Learning (NI AutoML), a web application created for everyone that allows us to easily change the configurations of the model by just clicking some buttons. This work shows how the model performance is influenced by modifying what columns of data to use, by data splitting or by adding or deleting preprocessing steps in the pipeline. All the results obtained for the different experiments are analyzed in this paper. The proposed flow is generic enough to be applied for all the use cases. To exemplify the whole process, a synthetic data set obtained by generating current and voltage in an RL circuit was chosen and the experiments part was created. The data represent two waveforms: one for current and one for voltage and they represent data recorded during the test time. In the end process each test has a label associated: Pass or Fail. The classification problem was defined for help in improving the fail detection rate.