Piezoelectric micro-electro-mechanical system (MEMS) loudspeakers are drawing more interest due to their applications in new-developing audio technologies. MEMS devices’ small dimensions necessitate including thermal and viscous effects in the surrounding air when simulating their behaviors. Thus, the linearized mass, momentum and energy conservation equations are used to describe these effects. These formulations are implemented in our open-source finite element program openCFS. In this article, we model a 3D piezoelectric MEMS loudspeaker in two configurations: open and closed back-volume, which behave differently due to the effects of air viscosity and pressure forces between the cantilever and the closed back-volume. Furthermore, using a customized vacuum chamber, the atmospheric pressure is varied and its effects are studied in these two configurations, numerically and experimentally. Experimental results prove that our model predicts the behavior of the piezoelectric MEMS loudspeaker in various configurations very well. Additional simulations illustrate the effect of the slit thickness and thermal losses.
In piezoelectric transducer applications, it is common to use a unipolar operation signal to avoid switching of the polarisation and the resulting nonlinearities of micro-electromechanical systems. However, semi-bipolar or bipolar operation signals have the advantages of less leakage current, lower power consumption and no additional need of a DC−DC converter for low AC driving voltages. This study investigates the potential of using piezoelectric layers with an imprint for stable bipolar operation on the basis of epitaxially grown lead zirconate titanate cantilevers with electrodes made of a metal and metal oxide stack. Due to the manufacturing process, the samples exhibit high crystallinity, rectangular shaped hysteresis and a high piezoelectric response. Furthermore, the piezoelectric layers have an imprint, indicating a strong built-in field, which shifts the polarisation versus electric field hysteresis. To obtain the stability of the imprint, laser doppler vibrometry and switching current measurements were performed at different temperatures, yielding a stable imprinted electric field of −1.83 MV/m up to at least 100 °C. The deflection of the cantilevers was measured with a constant AC driving voltage while varying the DC bias voltage to examine the influence of the imprint under operation, revealing that the same high deflection and low nonlinearities, quantified by the total harmonic distortion, can be maintained down to low bias voltages compared to unipolar operation. These findings demonstrate that a piezoelectric layer with a strong imprint makes it possible to operate with low DC or even zero DC bias, while still providing strong piezoelectric response and linear behaviour.