Tannery sludge is disposed of in landfills as it is considered a special residue by the Italian legislation, creating pollution and waste. This paper aims at evaluating the performance of the anaerobic fermentation process to obtain short-chain fatty acids (SCFAs) from this waste. The assessment of the most appropriate conditions, in terms of pH, temperature, initial total solids (TSs) content, and application of oxidizing-thermal pretreatment has been developed. The batch test trials revealed that the combined microwave and hydrogen peroxide (MW-H2O2) pretreatment followed by thermophilic conditions gave the best results, in terms of the acidification yield (0.31 gCODSCFA/gVS0) and maximal SCFA concentration (above 26 g CODSCFA/L). In the tests conducted without pretreatment, the mesophilic temperature should be preferred since the acidification performances were comparable to or even better than their thermophilic counterparts. The SCFA composition analysis showed that in mesophilic fermentation, tannery sludge can generate up to 50% acetic acid (CODAc/CODSCFA), if previously pretreated (MW-H2O2). This research acts as a forerunner for the appropriate handling of this resource, to employ it for the development of a new tannery industry focused on a circular approach, rather than to simply dispose of it in landfills.
This study evaluated single-cell protein production from PHA-rich mixed microbial cultures obtained from fermentation and subsequent PHA storage, using urban (namely food waste and municipal sewage sludge; FW-MSS) and agricultural waste (namely wine lees; WL) streams as substrates. FW-MSS fermentation achieved stable short-chain fatty acid (SCFA) production and a high CODSCFA/CODSOL ratio of 0.77 ± 0.01, which allowed to select a mixed microbial culture (MMC) with intracellular PHA content of 15.1 wt%, which aligns with fish dietary standards and yielded a MMC biomass with a protein level of 55.1 wt% and a balanced essential amino acid (EAA) profile. In contrast, WL fermentation showed lower SCFA content and stability, yielding a MMC with 45.8 wt% of protein along with a high non-conformance rate (53.65 %), and 7.2 wt% PHA, making the resulting MMC more suited as a supplemental protein source. Distinct microbial communities developed in the two SBRs due to different feedstocks, influencing the abundance of PHA-storing bacteria, with no known fish pathogens detected in either sample. Statistical analysis confirmed FW-MSS's superior product consistency, supporting its potential as a good quality SCP for aquafeed, especially for rainbow trout, as confirmed by its high essential amino acid index (EAAI).
4 July 2026 in Journal of Environmental Management
Anaerobic digestion (AD) is a well-established technology for sludge stabilization and energy recovery; however, its application to PFAS-contaminated industrial sludge remains poorly understood. In this study, tannery sludge was treated under mesophilic (37 °C) and thermophilic (55 °C) conditions in continuous stirred tank reactors, to evaluate process performance and assess the fate of per- and polyfluoroalkyl substances (PFAS). Subsequently, adsorption was investigated as a post-treatment for PFAS removal from the clarified digestate (CD) using granular activated carbon (GAC) and a strong-base anion exchange resin (AER). Both reactors achieved stable operation, with thermophilic conditions resulting in higher specific gas production (0.62 vs 0.49 m3/kg VS) and volatile solids removal (54% vs 42%) compared with mesophilic digestion. However, PFAS concentrations in the CD remained above 10,000 ng/L; no significant differences were observed between mesophilic and thermophilic conditions, suggesting that AD thermal regime had a limited influence on PFAS occurrence in the liquid fraction. Adsorption experiments showed that AER exhibited a higher adsorption capacity than GAC for both total PFAS and individual congeners. The adsorbent dosages required to achieve target PFAS concentrations (500 and 100 ng/L) were estimated, and a preliminary full-scale assessment highlighted substantial differences in adsorbent inventory requirements and infrastructure footprint between the two technologies. Overall, the results demonstrate that, while AD is effective for energy recovery from tannery sludge, it does not mitigate PFAS contamination and therefore requires dedicated post-treatment. These findings provide new insights into the integrated management of PFAS-contaminated industrial sludge, supporting the development of scalable treatment strategies.