The growing demand for electricity, caused by dynamic economic growth, leads to a decrease in the available non-renewable energy resources constituting the foundation of global power generation. A search for alternative sources of energy that can support conventional energy technologies utilizing fossil fuels is not only of key significance for the power industry but is also important from the point of view of environmental conservation and sustainable development. Plant biomass, with its specific chemical structure and high calorific value, is a promising renewable source of energy which can be utilized in numerous conversion processes, enabling the production of solid, liquid, and gaseous fuels. Methods of thermal biomass conversion include pyrolysis, i.e., a process allowing one to obtain a multifunctional product known as biochar. The article presents a review of information related to the broad uses of carbonization products. It also discusses the legal aspects and quality standards applicable to these materials. The paper draws attention to the lack of uniform legal and quality conditions, which would allow for a much better use of biochar. The review also aims to highlight the high potential for a use of biochar in different environments. The presented text attempts to emphasize the importance of biochar as an alternative to classic products used for energy, environmental and agricultural purposes.

We assess the possibility of using biochar and ash from plant biomass to fertilise giant miscanthus (Miscanthus x giganteus). The paper concerns the optimisation of the combination of fertiliser applications of the aforementioned materials in the context of the plant yield obtained. There was an increase in yield of 8–68% over the two years of research when compared with the control plots. It was found that the application of biochar, ash from biomass and a combination of the two at appropriate rates as a soil additive can substitute for classic mineral fertilisers and strengthen the ecological aspects of energy crop cultivation. The interpretation of the results obtained enabled the selection of optimum fertiliser applications, resulting in a significant increase in the yield of plants and an improvement in soil chemical properties. It was found that the highest yield of dry matter of giant miscanthus plants, after both the first and second year of cultivation, was obtained by applying the fertiliser containing ash at a rate of 1.5 t ha⁻¹, together with biocarbon and the combination of biochar and ash at a rate of 1.5 t ha⁻¹.

The purpose of this paper is to review the scientific results and summarise the emerging topic of the effects of statistic magnetic field on the structure, biochemical activity, and gene expression of plants. The literature on the subject reports a wide range of possibilities regarding the use of the magnetic field to modify the properties of plant cells. MFs have a significant impact on the photosynthesis efficiency of the biomass and vigour accumulation indexes. Treating plants with SMFs accelerates the formation and accumulation of reactive oxygen species. At the same time, the influence of MFs causes the high activity of antioxidant enzymes, which reduces oxidative stress. SMFs have a strong influence on the shape of the cell and the structure of the cell membrane, thus increasing their permeability and influencing the various activities of the metabolic pathways. The use of magnetic treatments on plants causes a higher content of proteins, carbohydrates, soluble and reducing sugars, and in some cases, lipids and fatty acid composition and influences the uptake of macro- and microelements and different levels of gene expression. In this study, the effect of MFs was considered as a combination of MF intensity and time exposure, for different varieties and plant species. The following article shows the wide-ranging possibilities of applying magnetic fields to the dynamics of changes in the life processes and structures of plants. Thus far, the magnetic field is not widely used in agricultural practice. The current knowledge about the influence of MFs on plant cells is still insufficient. It is, therefore, necessary to carry out detailed research for a more in-depth understanding of the possibilities of modifying the properties of plant cells and achieving the desired effects by means of a magnetic field.

The presented article is a review of the literature reports on the influence of magnetic and electric fields on the growth, yield, ripening, and durability of fruits and their quality. The article shows the potential application of MF and EF in agricultural production. Magnetic and electrical fields increase the shelf life of the fruit and improve its quality. Alternating magnetic fields (AMF) with a value of 0.1–200 mT and a power frequency of 50 Hz or 60 Hz improve plant growth parameters. MF cause an increase in firmness, the rate of maturation, the content of beta-carotene, lycopene, and fructose, sugar concentration, and a reduction in acidity and respiration. The most common is a high-voltage electric field (HVEF) of 2–3.61 kV/cm. These fields extend the shelf life and improve the quality of fruit by decreasing respiration rate and ethylene production. The presented methods seem to be a promising way to increase the quantity and quality of crops in agricultural and fruit production. They are suitable for extending the shelf life of fruit and vegetables during their storage. Further research is needed to develop an accessible and uncomplicated way of applying MF and AEF in agricultural and fruit production.

Waste biomass from plant production is an important raw material for producing energy from renewable sources. Capabilities and technologies of processing are still being improved and modernized in order to achieve the highest energy efficiency. This study assesses energetic properties of wheat straw, rapeseed, and willow. The material was subjected to heat treatment, i.e., torrefaction process at temperatures of 220, 260, and 300 °C for the duration of 60, 75, and 90 min. Measurements were performed to compare parameters of raw biomass and the torrefied products. The materials were examined and compared for the contents of moisture; biogenic elements N, C, and H; as well as calorific value, ash, and volatiles. Measurements were also performed to assess the composition of biomass in terms of particle sizes. Analysis of the results made it possible to determine optimal parameters for carrying out the torrefaction process. The use of the torrefaction process made it possible to obtain a material with an increased calorific value by more than 20%, and a 2–3 times higher content of elements in the powdered material, as well as to improve the grinding of the material. This information will enable the development of biomass thermal treatment technologies towards the use of waste biomass from agricultural production.

Biochar from forest biomass and its remains has become an essential material for environmental engineering, and is used in the environment to restore or improve soil function and its fertility, where it changes the chemical, physical and biological processes. The article presents the research results on the opportunity to use the pyrolysis process to receive multifunctional biochar materials from oak biomass. It was found that biochars obtained from oak biomass at 450 and 500 °C for 10 min were rich in macronutrients. The greatest variety of the examined elements was characterized by oak-leaf pyrolysate, and high levels of Ca, Fe, K, Mg, P, S, Na were noticed. Pyrolysates from acorns were high in Fe, K, P and S. Oak bark biochars were rich in Ca, Fe, S and contained nitrogen. In addition, biomass pyrolysis has been found to improve energy parameters and does not increase the dust explosion hazard class. The oak biomass pyrolytic at 450 and 500 °C after 10 min increases its caloric content for all samples tested by at least 50%. The highest caloric value among the raw biomass tested was observed in oak bark: 19.93 MJ kg⁻¹ and oak branches: 19.23 MJ kg⁻¹. The mean and highest recorded K_stmax were 94.75 and 94.85 bar s⁻¹, respectively. It can be concluded that pyrolysis has the potential to add value to regionally available oak biomass. The results described in this work provide a basis for subsequent, detailed research to obtain desired knowledge about the selection of the composition, purpose, and safety rules of production, storage, transport and use of biochar materials.