In this work, the chemical composition, chemical structures, and sugar release were evaluated for sweet sorghum bagasse (SSB) biomass in response to alkaline pretreatments and enzymatic hydrolysis. Five different ratios of 2 M sodium hydroxide (NaOH) and sodium carbonate () solutions were used for biomass fractionation along with two heat treatment conditions, 85°C and 150°C for 1 h. Sugar yields from enzymatic hydrolysis were measured at different durations up to 72 h. SSB samples pretreated at high temperature using alkaline solutions containing equal amounts of and NaOH favored retaining cellulose content (up to 90%) while effectively removing hemicellulose (65%) and lignin (92%). The high-temperature pretreatment conditions resulted in improved delignification, higher sugar concentrations, and sugar yields. Pretreatment solutions consisting of 50% or more NaOH produced higher glucose yields (85%–90%) and total sugar concentrations. Moreover, pretreatment solutions containing improved the hydrolysis rates allowing SSB samples reach maximum yields faster than those without it, 48 versus 72 h. Results showed pretreatment methods combining NaOH and were effective at promoting SSB biomass conversion, increasing sugar recovery after hydrolysis, and reducing the hydrolysis duration, all of which are desirable and cost beneficial.
12 November 2012 in International Journal of Applied Glass Science
Renewable resources such as lignocellulosic biomass are effective at producing fermentable sugars during enzymatic hydrolysis when pretreated. Optimizing pretreatment methods for delignification while maintaining sustainability and low processing costs requires innovative strategies such as reusing greenhouse gas emissions for materials processing. Corn stover, an agricultural waste residue, was pretreated with 2.2 M produced from captured via absorption in a 5 M NaOH solution. Composition analysis of the pretreated corn stover exhibited higher cellulose content (40.96%) and less lignin (16.50%) than the untreated biomass. Changes in the chemical structures are visible in the FTIR-ATR spectra, particularly in the cellulose and lignin-related absorption bands. The sugar release from hydrolysis was evaluated at different time intervals and by varying two enzyme ratios of CTec2-to-HTec2 (2:1 and 3:1). Enzymatic hydrolysis produced higher and more stable glucose yields for the pretreated biomass, surpassing 90% after 24 h using the 3:1 enzyme ratio. Sugar concentrations notably increased after pretreatment and even more when using the cellulase-rich enzyme solution. The maximum glucose, xylose, and arabinose recovered were 44, 19, and 2.3 −1. These results demonstrate the viability of capturing and converting it into an efficient pretreatment for corn stover biomass. Additional processing optimizations depend on the combination of physicochemical parameters selected.