Nowadays, awareness of the environment is rising among society. Thus, more researches on the utilization of biodegradable polymer as an alternative to non-biodegradable polymers have been published. Among various biopolymers, Poly (lactic acid) (PLA) and polybutylene adipate terephthalate (PBAT) have received a lot of attention because they can be processed using most of the conventional polymer processing methods. PLA is high in strength and modulus, but it is brittle while PBAT is flexible and tough. Thus, PBAT is a good candidate for the toughing of PLA. But when the PLA is blending with PBAT, a certain strength of PLA may be affected. Hence, the reinforcement material is required to improve weakened strength. In this study, PLA was blended with PBAT at various ratios (PLA: PBAT = 90: 10, 80: 20, 70: 30) with a melt‐blending method. The PLA/PBAT blends at a blend ratio of 80: 20, exhibited optimum mechanical performance. Then, PLA/PBAT blends at a blend ratio of 80: 20 was reinforced with different content of EFB-MCC (1 wt%, 3 wt% and 5 wt%) using an internal mixer. The PLA/PBAT blends reinforced with EFB-MCC composites were produced using the compression moulding method. The mechanical, thermal and morphology properties of the composites were investigated. The impact strength of PLA/PBAT blend after addition of both C-MCC and EFB-MCC up to 5 wt% was reduced. The morphological observations from SEM proved the occurrence of the MCC agglomeration in PLA/PBAT blend. DSC results showed trivial changes between the Tg and Tm of PLA/PBAT blend with PLA/PBAT blend reinforced with both types of MCC. TGA results demonstrated that the PLA/PBAT blend reinforced with EFB-MCC has better thermal stability compared to C-MCC. However, further research is needed to improve the interfacial properties of the immiscible PLA/PBAT by compatibilization and enhance the properties of the MCC reinforced PLA/PBAT blend composites.
30 June 2010 in Polymer-Plastics Technology and Engineering
This study has been embarked to use the nanofiller to compensate the adverse effect of the lignocellulosic filler. Unsaturated polyester-kenaf composites filled with various types of MMT filler were produced. The study showed that the incorporation of untreated montmorillonite filler (UNT-MMT) and cetyl trimethyl ammonium bromide-modified (CTAB-MMT) had improved the tensile properties. The superior properties of those with CTAB-MMT were attributed to more effective distribution of MMT in the matrix, the availability of effective high aspect ratio MMT and increased compatibility of MMT with the matrix as the results of the introduction of long polymer chain from CTAB.
15 January 2012 in Polymer-Plastics Technology and Engineering
Kenaf-Polypropylene composites filled with montmorillonite (MMT) filler were produced. The incorporation of MMT had improved the flexural and impact properties. Addition of compatibilizer, had improved the flexural and impact properties of the composites. This showed that the compatibility between MMT filler and kenaf particles with PP matrix was increased, giving way for better stress distribution from the matrix to the fillers/particles. The lower value of MFI with the incorporation of MMT, compatibilizer and kenaf indicated the interaction between the components. Scanning electron microscopy (SEM) results showed the evidence of compatibility between MMT and PP matrix with the addition of compatibilizer.
We demonstrate a scalable continuous feed method for the synthesis of polymer Janus nanoparticles with different composition and with different aspect ratios between lobes, including with one hard cross-linked polystyrene lobe and one soft film-forming poly(methyl methacrylate-co-butyl acrylate) (P(MMA-co-BA)) lobe, through reversible addition–fragmentation chain transfer (RAFT)-mediated emulsion polymerization. Snowman shaped particles of size around 40 nm are synthesized through a continuous monomer feeding method, which enables kilogram-scale synthesis of diverse polymer Janus nanoparticles, with a solids content greater than 30%. The Janus nanoparticles with the soft P(MMA-co-BA) lobes spontaneously self-assemble around solid particles in an aqueous phase, forming a thin (5–100 nm) polymer film that completely encapsulates the solid particles. The process is achieved at room temperature and under mild conditions. The film-forming Janus nanoparticles show excellent encapsulation ability for a variety of solid particles, such as organic and inorganic pigments, carbon nanotubes and calcite, without requiring polymerization to be conducted in the presence of the solid particles. When the Janus nanoparticles were used to encapsulate calcite particles in low sheen paints, the encapsulation provided superior stain resistance to the formed paint film.
30 December 2021 in International Journal of Learning, Teaching and Educational Research
Academic dishonesty manifested in the proliferating acts of plagiarism can be eradicated by returning to value teaching. In a study involving 37 first-year students in one academic year, a single-group quasi-experimental procedure with mixed qualitative and quantitative analyses of students’ assignments was performed. The procedure involved diagnosing plagiarism by strategic manual detection and classification of occurrences and recording the frequency of occurrence. The objective was to examine the effects of communicating about plagiarism by the designed plagiarism integrity narratives (PIN) intervention on students’ integrity based on their source-attribution practices. In the first semester, an assignment was administered without any word on plagiarism as the baseline data for students’ academic integrity at pre-test. In the second semester, the post-PIN-intervention assignment set with similar cognitive demand as the first was administered. The post-PIN intervention showed 76% of students taking steps to not succumb to plagiarism, far outweighing the 5% not taking heed. Of those who acknowledged information sources, 14% showed excellent referencing skills, capturing the potential first-year role model. In terms of outsourcing and attribution combined, the PIN intervention offered a 95% transformation of moral values, hinting at the possibility of resetting academic integrity via communication and clear directives. Lifting plagiarism rules as a “litmus test” (third assignment) revealed 28% integrity-ready students applying the fundamental attribution rules. Outstanding referencing skills and honesty were portrayed by a self-regulated student who had internalized academic integrity. The findings signal the possibility of curbing plagiarism in university classrooms and nurturing students to start weaving values into the social fabric.
25 August 2016 in Journal of Coatings Technology and Research