Contactless vital sign measurement technologies have the potential to greatly improve patient experiences and practitioner safety while creating the opportunity for comfortable continuous monitoring. We introduce a contactless alternative for measuring human heart sounds. We leverage millimeter wave frequency-modulated continuous wave radar and multi-input multi-output beamforming techniques to capture fine skin vibrations that result from the cardiac movements that cause heart sounds. We discuss contact-based heart sound measurement techniques and directly compare the radar heart sound technique with these contact-based approaches. We present experimental cases to test the strengths and limitations of both the contact-based measurement techniques and the contactless radar measurement. We demonstrate that the radar measurement technique is a viable and potentially superior method for capturing human heart sounds in many practical settings.

In this paper, a novel low-power millimeter wave (mmWave) multiple-input multiple-output (MIMO) radar with 20 transmitters (Tx) and 20 receivers (Rx) successfully demonstrates short-range high resolution human body imaging and accurate vital signs detection, including heart rate and breathing rate estimation of multiple subjects at one time. This mmWave MIMO radar system synthesizes wide band signal with stepped-frequency-modulated-continuous-wave (SFCW). Due to the increased degrees of freedom, 3-D high resolution images of the environment can be formed. With this image precise body part locations can be obtained. The human chest is chosen from the image and isolated as the target for beamforming. Vital signs parameters are estimated from the recovered phase variation at the maximum range response after beamforming. Coherently combining spatial channels significantly enhance the vital signs detection performance compared that of using a single Tx/Rx pair (single channel). Experiment demonstration on human subjects shows that the estimated breathing rate and heart rate from the mmWave MIMO system match the ground truth from the contact sensors.

Validating RF applications is traditionally time consuming, even for relatively simple systems. We developed the WISCA Software-Defined Radio Network (WISCANet) to accelerate the implementation and validation of radio applications over-the-air (OTA). WISCANet is a hardwareagnostic control software that automatically configures and controls a software-defined radio (SDR) network. By abstracting the hardware controls away from the user, WISCANet allows a non-expert user to deploy an OTA application by simply defining a baseband processing chain in a high level language. This technology reduces transition time between system design and OTA deployment, accelerates debugging and validation processes, and makes OTA experimentation more accessible to users that are not radio hardware experts. WISCANet emulates real-time RF operations, enabling users to perform real-time experiments without the typical restrictions on processing speed and hardware capabilities. WISCANet also supports multiple RF front-ends (RFFEs) per compute node, allowing sub-6 and mmWave systems to coexist on the same node. This coexistence enables simultaneous baseband processing that simplifies and enhances advanced algorithms and beyond-5G applications. In this study, we highlight the capabilities of WISCANet in several sub-6 and mmWave over-the-air demonstrations. The open source release of this software may be found on the WISCA GitHub page.

Millimeter Wave (mmWave) radar has emerged as a promising modality for speech sensing, offering advantages over traditional microphones. Prior works have demonstrated that radar captures motion signals related to vocal vibrations, but there is a gap in the understanding of the analytical connection between radar-measured vibrations and acoustic speech signals. We establish a mathematical framework linking radar-captured neck vibrations to speech acoustics. We derive an analytical relationship between neck surface displacements and speech. We use data from 66 human participants, and statistical spectral distance analysis to empirically assess the model. Our results show that the radar-measured signal aligns more closely with our model filtered vibration signal derived from speech than with raw speech itself. These findings provide a foundation for improved radar-based speech processing for applications in speech enhancement, coding, surveillance, and authentication.