It is essential to design an appropriate submarine cable route to reduce costs and improve reliability. A methodology that can be used for multi-objective optimization in submarine cable route planning is proposed and numerically studied in this paper. The costs and risks are numerically assessed and mapped to the geographical map. The pheromone and heuristic functions of the ant colony optimization (ACO) algorithm are associated with the geographical map of costs and risks, which enables it to search for a submarine cable route with multi-objective optimization. The results show that the submarine cable route designed by the methodology can effectively avoid high-cost and high-risk regions, which means that the designed submarine cable route is cost-effective and highly reliability.
This paper proposed and investigated a sensor that could simultaneously measure temperature and magnetic fields. The key component of this sensor was a photonic crystal fiber with a length of only 1 cm, whose air holes were arranged in a circular lattice symmetry. In order to increase the birefringence of the fiber, we introduced well-designed point defects into the photonic lattice. The deficient pores were filled with a magneto-fluidic material (MF) that sensed temperature and magnetic fields through changes in its refractive index. The outer layer of the fiber cladding was coated with a thin film of Indium tin oxide (ITO), which was in direct contact with ethanol. The surface plasmon resonance created by ITO was used to achieve dual-parameter demodulation and solve the cross-sensitivity problem. The photonic crystal fiber and other optical components made up a Sagnac interferometer, which was used to measure the transmission spectrum of the Sagnac interference. At the same time, the loss spectrum due to the surface plasmon resonance was measured. The variation in temperature and magnetic field was directly related to the shift in the resonance wavelengths of the transmission and loss spectra, thus enabling simultaneous dual-parameter measurements. We investigated the sensing performance of the sensor numerically. The results showed a wavelength sensitivity of 7.6 nm/°C and 0.75 nm/mT, with a resolution of 1.316 × 10−3 °C and 1.333 × 10−3 mT for temperature and magnetic field, respectively. Compared with other sensors, the key component of the proposed sensor is only 1 cm in length, which makes it compact and easy to manufacture. The geometric parameters, such as the position and radius of the pores, are less likely to deviate from the ideal values, which helps to reduce the impact of manufacturing tolerances on the sensing performance.
In the past, several frequency-domain channel-estimation methods were proposed for coherent optical orthogonal frequency division multiplexing systems, which use offset-quadrature-amplitude modulation (CO-OFDM-OQAM). A common challenge for these methods is that the training sequences they use, even though they increase the magnitude of the pseudo-pilots, can make the peak-to-average power ratio (PAPR) of the signal worse. To address this problem, an innovative modified frequency-domain channel estimation method is designed and investigated for a polarization-division-multiplexed CO-OFDM-OQAM system that uses dual-dependent pilots. The operating principle of this new method is described in detail. Then, its PAPR performance and channel-estimation capability are examined using numerical simulations. The proposed method not only ensures a sufficiently large magnitude of the pseudo-pilot but also does not seriously degrade the PAPR of the signal. It is also found that the magnitude of its pseudo-pilot (2.3136) exceeds that of the interference approximation method with real pilots (1.1086), and it is only slightly worse than that of the enhanced IAM with complex pilots (2.6074). The PAPR of the new method (max 11.4 dB) is much lower than that of other frequently used methods. Finally, the channel-estimation capability of the proposed method is validated for both back-to-back and long-distance transmission scenarios. Furthermore, the BER performance of several different channel-estimation methods is also compared. The obtained results confirm the above observations.
This paper proposes an accuracy enhancement method for fiber-longitudinal power profile estimation (PPE) based on convolutional neural networks (CNN). Two types of CNNs are designed. The first network treats different polarization streams identically and is denoted as CNN. The second network considers the difference between the contributions of different polarization streams to the nonlinear phase shift and is denoted as enhanced CNN (ECNN). The numerical simulation results confirm the effectiveness of the method for a 64 Gbaud/s quadrature phase-shift keying (QPSK) polarization-division-multiplexed (PDM) coherent optical communication system with a fiber length of 320 km. The effects of finite impulse response (FIR) filter length, power into the fiber, and polarization mode dispersion on the PPE accuracy are examined. Finally, the results of the proposed method are monitored in the presence of several simultaneous power attenuation anomalies in the fiber optic link. It is found that the accuracy of the PPE substantially improves after using the proposed method, achieving a relative gain of up to 71%. When the modulation format is changed from QPSK to 16-ary quadrature amplitude modulation (16-QAM), and the fiber length is increased from 360 km to 480 km, the proposed method is still effective. This work provides a feasible solution for implementing fiber-longitudinal PPE, enabling significantly improved estimation accuracy in practical applications.
The enhanced Gaussian noise (EGN) model, which accounts for inter-channel stimulated Raman scattering (ISRS), enables accurate evaluation of nonlinear interference (NLI) across the C+L band. However, its computation time increases linearly with the number of wavelength channels under test, limiting its practical applicability. This letter proposes a channel NLI extrapolation method that requires computation on only five sparsely selected wavelength channels, enabling real-time, integration-free predictions across the entire transmission bandwidth. The proposed method accommodates arbitrary launch power distributions and does not rely on large-scale data training. Over a 20×100 km transmission distance, the mean absolute error (MAE) of SNRNLI below 0.1 dB, with the maximum error for any channel not exceeding 0.3 dB across various modulation formats, spectral configurations, fiber types, and launch powers. This approach enhances the engineering applicability of the ISRS EGN model and offers a computationally efficient framework for accurate NLI modeling.
In coherent optical communication systems, laser phase noise causes the phase of the optical signal to fluctuate randomly over time, and the constellation diagram at the receiving end exhibits strong rotation and divergence, resulting in serious degradation of the system transmission quality. This paper proposed a phase noise suppression algorithm based on real-imaginary alternating pilots for coherent optical orthogonal frequency-division multiplexing communication systems with offset quadrature amplitude modulation (CO-OFDM-OQAM). A brand new real-imaginary alternating pilot is designed based on the characteristics of laser phase noise and the symmetrical nature of intrinsic imaginary interference (IMI) coefficients, and is combined with linear fitting to realize high-accuracy estimation of the common phase error (CPE) of each frequency domain symbol. As the noise compensation is performed in the frequency domain, the proposed algorithm has a significantly lower computational complexity as compared with time-domain phase noise suppression algorithms. A numerical simulation platform with an effective data rate of 65 Gbits/s is constructed to evaluate the noise suppression quality of the proposed method by testing the transmission performance of a polarization multiplexing CO-OFDM-OQAM system under different laser linewidth and subcarrier quantity conditions. The simulation results confirm that for the CO-OFDM-OQAM system using the 16-QAM modulation format and 256 or 512 subcarriers, the proposed method effectively compensates for CPE without affecting the peak-to-average ratio of power.