Heterostructure construction, especially for anodes, is an effective strategy to promote electron transfer and improve surface reaction dynamics, thus achieving high performance in lithium-ion batteries. Herein, in situ partial conversion of metal sulfide to oxide with high lattice match is utilized to engineer a ZnO/ZnS heterostructure. The mosaic ZnO/ZnS heterostructure with abundant interfaces is activated into homogeneous zinc oxysulfide with size optimization during cycling, which delivers 920 mA h g−1 after 1300 cycles even at 2 A g−1. A pouch-type full cell (LiCoO2‖ZnO/ZnS) is assembled and maintains over 85% of its initial capacity after 300 cycles at 2C, confirming its potential practicability. Theoretical calculations predict that, combined with LiZn nanodots, the Li2O/Li2S matrix is endowed with more Li anchoring sites and higher Li adsorption energy. Therefore, the interfacial charge redistribution is modified to contribute high interfacial Li storage. The reasonable interfacial engineering by designing a mosaic heterostructure breaks new grounds for the design of large-capacity and high-reversibility conversion-alloying-type anodes.
Highly active bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) play a pivotal role in Zn–air batteries. The high cost, scarcity and instability of precious-metal-based electrocatalysts for the ORR and OER dramatically hamper their practical application in such clean-energy set-ups. Here, we report highly active Co5.47N-loaded N-doped carbon (CoNMC), prepared via the direct NH3 annealing of a millet–CoCl2 mixture, which is a cheap and mass-producible form of biomass. The optimized product shows superior ORR activity (a half-wave potential of 0.81 V vs. RHE) and electrochemical stability (a 16.5 mV negative shift of the half-wave potential after 2000 cycles) in alkaline media. Also, it shows appealing OER activity (an operating potential at 10 mA cm−2 of 1.62 V vs. RHE). This excellent electrochemical performance can be attributed to the formation of active Co5.47N nanoparticles, the large specific surface area, the abundance of nitrogen active sites, and the high graphitization degree. When assembled into a Zn–air battery, the CoNMC-based cell shows comparable performance to a Pt/C-RuO2 one.
25 November 2019 in Journal of Materials Chemistry A
Convertible reactant anodes such as SnO2, GeO2, In2O3, and ZnO offer unusually large capacity for lithium ion batteries (LIBs) but all suffer from a huge volume expansion which triggers internal fracture and reconfiguration. Herein, sulfur-termination as a shifting paradigm to relieve volume expansion is proposed. The sulfur-termination strategy is expected to set each metal nanocrystal into a conducting container during the reduction process and plenty of containers are physically separated from each other but are electrically wired to the current collector. To put the strategy into practice, sulfur-terminated tin oxide (SnO2−x-S) nanocrystals as reactants are demonstrated to resist coarsening and reconfiguration throughout cycling. Such LIB anodes with the addition of a conductive supporter provide 1010 mA h g−1 at 2 A g−1 after 800 cycles, breaking new ground on multiple fronts for this promising anode class.
High‐capacity O3‐type layered NiFeMn‐based oxides are promising cathodes for sodium‐ion batteries, though their practical deployment is constrained by the inherent limitations of Fe redox chemistry. Traditional designs generally enforcing stoichiometric symmetry (Ni ═ Mn) yield low Fe redox activity. Herein, we propose a valence engineering strategy that breaks conventional Ni/Mn stoichiometry to reconfigure Fe's local chemical environment and unlock unprecedented redox depth. Density functional theory (DFT) calculations reveal that the designed NaNi 0.35 Fe 0.225 Mn 0.425 O₂ cathode exhibits a reduced Bader charge on Fe (1.598 vs. 1.638 in NaNi 1/3 Fe 1/3 Mn 1/3 O 2 ) and elevated Fe 3 d orbital energy, signifying enhanced Fe redox activity. This configuration enables an exceptional Fe 2.60+ /Fe 3.88+ redox (1.28 e − per Fe), delivering a reversible capacity of 184.3 mAh g −1 within 2–4.2 V at 0.2 C, markedly exceeding the benchmark NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (161.3 mAh g −1 ) with low reaction depth of Fe 3.01+ /Fe 3.61+ . The intensified cationic redox reaction enables an ultrahigh energy density of 596 Wh kg −1 . The NaNi 0.35 Fe 0.225 Mn 0.425 O 2 cathode demonstrates robust performance over a broad temperature range from −15°C to 60°C. In situ and ex situ characterizations unveil a reversible O3 ↔ P3 ↔ OP2 phase transition with minimal volume change (1.88%) that circumvents detrimental deleterious O′3 intermediates and intragranular cracking. This work establishes valence engineering as a paradigm to consolidate cationic redox reaction in high‐energy layered sodium oxide cathodes.