Oil is an important resource for the development of modern society. Accurate detection of oil wells is of great significance to the investigation of oil exploitation status and the formulation of an exploitation plan. However, detecting small objects in large-scale and high-resolution remote sensing images, such as oil wells, is a challenging task due to the problems of large number, limited pixels, and complex background. In order to overcome this problem, first, we create our own oil well dataset to conduct experiments given the lack of a public dataset. Second, we provide a comparative assessment of two state-of-the-art object detection algorithms, SSD and YOLO v4, for oil well detection in our image dataset. The results show that both of them have good performance, but YOLO v4 has better accuracy in oil well detection because of its better feature extraction capability for small objects. In view of the fact that small objects are currently difficult to be detected in large-scale and high-resolution remote sensing images, this article proposes an improved algorithm based on YOLO v4 with sliding slices and discarding edges. The algorithm effectively solves the problems of repeated detection and inaccurate positioning of oil well detection in large-scale and high-resolution remote sensing images, and the accuracy of detection result increases considerably. In summary, this study investigates an appropriate algorithm for oil well detection, improves the algorithm, and achieves an excellent effect on a large-scale and high-resolution satellite image. It provides a new idea for small objects detection in large-scale and high-resolution remote sensing images.

Multispectral satellite data allow experts to discriminate rock units based on their spectral signature characteristics. Here, Sentinel-2, ASTER and the Landsat-8 Operational Land Imager (OLI) were assessed for lithological mapping by using a random forest (RF) classifier for a study area located in Xitieshan, Northwest China. The classification accuracy of Sentinel-2 was 60.71%, which was 5.24% and 4.77% higher than the accuracies for ASTER and the Landsat-8 OLI, respectively. Three image enhancement techniques, namely, principal component analysis (PCA), independent component analysis (ICA) and minimum noise fraction (MNF), were used with grey-level cooccurrence matrices (GLCMs) to increase the quality of the input datasets. The ICA could discriminate between rock unit datasets better than the other approaches. In contrast, GLCM performed poorly when used independently. The overall classification accuracies were 60.71%, 62.63%, 64.34%, 65.21% and 58.87% for the 10 bands of Sentinel-2, PCA, MNF, ICA and GLCM, respectively. Then, five datasets were combined as a single group and applied in RF classification. Sentinel-2 obtained an overall accuracy of 73.96% and performed better than the other single-dataset approaches used in this study. Furthermore, the classification result of RF was achieved better performance than that of the support vector machine algorithm (SVM). During feature selection processing, ReliefF, the most successful pre-processing algorithm, was employed to preliminarily perform feature screening. Then, the optimal dataset was selected on the basis of the importance ranking of RF. A total of 20 more important predictors were selected from 114 original features using the ReliefF-RF model. These predictors were used in the lithological mapping, and an overall accuracy of 77.63% was reached.

The development of advanced and efficient methods for mapping and monitoring wetland regions is essential for wetland resources conservation, management, and sustainable development. Although remote sensing technology has been widely used for detecting wetlands information, it remains a challenge for wetlands classification due to the extremely complex spatial patterns and fuzzy boundaries. This study aims to implement a comprehensive and effective classification scheme for wetland land covers. To achieve this goal, a novel object-based multigrained cascade forest (OGCF) method with multisensor data (including Sentinel-2 and Radarsat-2 remote sensing imagery) was proposed to classify the wetlands and their adjacent land cover classes in the wetland National Natural Reserve. Moreover, a hybrid selection method (ReliefF-RF) was proposed to optimize the feature set in which the spectral and polarimetric decomposition features are contained. We obtained six spectral features from visible and shortwave infrared bands and 10 polarimetric decomposition features from the H/A/Alpha, Pauli, and Krogager decomposition methods. The experimental results showed that the OGCF method with multisource features for land cover classification in wetland regions achieved the overall accuracy and kappa coefficient of 88.20% and 0.86, respectively, which outperformed the support vector machine (SVM), extreme gradient boosting (XGBoost), random forest (RF), and deep neural network (DNN). The accuracy of the wetland classes ranged from 75.00% to 97.53%. The proposed OGCF method exhibits a good application potential for wetland land cover classification. The classification scheme in this study will make a positive contribution to wetland inventory and monitoring and be able to provide technical support for protecting and developing natural resources.

Kuh-e-Namak (Dashti) namakier is one of the most active salt diapirs along the Zagros fold–thrust belt in Iran. Its surface deformation should be measured to estimate its long-term kinematics. Ten Sentinel-2 optical images acquired between October 2016 and December 2019 were processed by using Co-Registration of Optically Sensed Images and Correlation (COSI-Corr) method. Forty-seven Sentinel-1 ascending Synthetic Aperture Radar (SAR) images acquired between April 2017 and December 2019 were processed by using Small Baseline Subset Synthetic Aperture Radar Interferometry (SBAS-InSAR) method. The deformation of Kuh-e-Namak (Dashti) namakier was measured using both methods. Then, meteorological data were utilized to explore the relationship between the kinematics of the namakier and weather conditions and differences in macrodeformation behavior of various rock salt types. The advantages and disadvantages of COSI-Corr and SBAS-InSAR methods in measuring the deformation of the namakier were compared. The results show that: (1) The flank subsides in the dry season and uplifts in the rainy season, whereas the dome subsides in the rainy season and uplifts in the dry season. Under extreme rainfall conditions, the namakier experiences permanent plastic deformation. (2) The “dirty” rock salt of the namakier is more prone to flow than the “clean” rock salt in terms of macrodeformation behavior. (3) In the exploration of the kinematics of the namakier via the two methods, COSI-Corr is superior to SBAS-InSAR on a spatial scale, but the latter is superior to the former on a time scale.

Hyperspectral remote sensing is widely used to detect petroleum hydrocarbon pollution in soil monitoring. Different spectral pretreatment methods seriously affect the prediction and analysis of petroleum hydrocarbon contents (PHCs). This study adopted a combined spectral data preprocessing technique that improves the prediction accuracy of petroleum hydrocarbons in soil. We combined continuum removal and wavelet packet decomposition (CR–Daubechies 3 (db3)) to process the hyperspectral reflectance data of 26 soil samples in the oil production work area in China and judged the correlation between spectral reflectance and petroleum hydrocarbons in soil. Partial least squares regression was used to construct an optimal model for the inversion of PHCs in soil and the leave-one-out cross-validation was used to select the best factor number. The best model of soil petroleum hydrocarbon inversion was determined by comprehensively comparing the initial spectrum, db3 to high-frequency spectrum, db3 to low-frequency spectrum, after-continuum removal spectrum, CR-db3 to high-frequency spectrum, and CR-db3 to low-frequency spectrum comprehensively. The main contributions of this study are as follows: (1) three-layer decomposition with CR-db3 can improve the correlation between spectral reflectance and PHCs and effectively improve the sensitivity of the spectrum to PHCs; (2) the prediction accuracy of the high-frequency spectrum of wavelet packet decomposition for PHCs in soil is higher than that of low-frequency information; (3) the proposed petroleum hydrocarbon prediction model based on CR-db3 processed spectra to obtain high-frequency information is optimal (coefficient of determination = 0.977, root mean square error of calibration = 3.078, root mean square error of cross-validation = 4.727, root mean square error of prediction = 4.498, ratio of performance to deviation = 6.12).