The globalization of the market and the increase of the global population that requires a higher demand of food products superimposes a big challenge to ensure food safety. In this sense, a common strategy to extend the shelf life and save life of food products is by avoiding bacterial contamination. For this, the development of antibacterial contact surfaces is an urgent need to fulfil the above-mentioned strategy. In this work, the role of MXene (Ti₃C₂T_x) in providing antibacterial contact surfaces was studied through the creation of composite films from polylactic acid (PLA), as the chosen polymeric matrix. The developed PLA/MXene films maintained the thermal and mechanical properties of PLA and also presented the attractive antibacterial properties of MXene. The composites’ behaviour against two representative foodborne bacteria was studied: Listeria mono-cytogenes and Salmonella enterica (representing Gram-positive and Gram-negative bacteria, respectively). The composites prevented bacterial growth, and in the case of Listeria only 0.5 wt.% of MXene was necessary to reach 99.9999% bactericidal activity (six log reductions), while against Salmonella, 5 wt.% was necessary to achieve 99.999% bactericidal activity (five log reductions). Cy-totoxicity tests with fHDF/TER166 cell line showed that none of the obtained materials were cytotoxic. These results make MXene particles promising candidates for their use as additives into a polymeric matrix, useful to fabricate antibacterial contact surfaces that could prove useful for the food packaging industry.

The globalization of the market, as well as the increasing world population, which require a higher demand for food products, pose a great challenge to ensure food safety and prevent food loss and waste. In this sense, active materials with antibacterial properties are an important alternative in the prolongation of shelf life and ensuring food safety. In this work, the ability of copper(II) hydroxy nitrate (CuHS) to obtain antibacterial films based on low density polyethylene (LDPE) and polylactic acid (PLA), was evaluated. The thermal properties of the composites, evaluated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), showed that the concentrations of added CuHS do not particularly change these characteristics with respect to the neat polymer matrix films. The mechanical properties, determined using dynamic mechanical analysis (DMTA), indicate a small increase in the brittleness of the material in PLA-based composites. The antibacterial properties against Listeria monocytogenes and Salmonella enterica were evaluated using a surface contact test, and a bacterial reduction of at least 8 to 9 logarithmic units for the composites with 0.3% CuHS, both in LDPE and PLA and against both bacteria, were achieved. The reusability of the composite films after their first use demonstrated a higher stability against Listeria monocytogenes. The migration and cytotoxicity of the composites loaded with 0.3% CuHS was evaluated, demonstrating the safety of these materials, which reinforces their potential use in food packaging applications.

In the industrial corridor of Boyacá, Colombia, population growth is accompanied by anthropogenic activities such as industrial operations, vehicle exhaust fumes, mining, smelting, atmospheric deposition, and excessive use of chemical products to promote crop growth. These activities are known to have a significant impact on urban and rural soils, contributing significantly to elevated concentrations of potentially hazardous elements in the environment. This industrial corridor is an area of economic and social development that needs to provide reference information that will allow us to know the state of soil quality to preserve and manage the public and geoenvironmental health of this region. Anthropogenic activities have contributed to the accumulation of potentially hazardous elements in the environment, affecting various levels of life and creating risks with economic and social implications. However, igneous activity or detrital deposition also enriches soils and creates geochemical anomalies in specific locations. In these cases, the identification of potentially hazardous elements involves the determination of likely sources of contamination and their relationship to the geological setting. In this study, the concentrations of As, Cd, Pb, Mn, Fe, Zn, Hg, Cu and Ni were determined in eighty-one soil samples from the Boyacá industrial corridor (Colombia). The sequential trend of the concentrations of potentially hazardous elements was as follows: Fe > Mn > Zn > Ni > Cu> Pb > As > Cd > Hg. Furthermore, the application of spatial analysis criteria in GIS software with multivariate statistical tools and geochemical indices allowed the identification of anthropogenic and geogenic sources. Most of the potentially hazardous elements were found in soils exposed to industrial and agricultural activities, except for iron. This element showed low variability in all samples, regardless of the geological formations. Due to the lack of reference values for potentially hazardous elements in Colombia, the concentrations were compared with the environmental standards of the Environmental Protection Agency (EPA) and the Ecuadorian Ministry of Environment, Water and Ecological Transition (MAE). The results demonstrate the complexity of the soil and represent the first exploratory study of potentially hazardous elements in this industrial corridor. These results are the starting point for the establishment of geochemical background lines in Colombia and for inspection policies for areas where productive activities converge.