Forest height and vertical structure profile functions can be estimated using polarimetric interferometric synthetic aperture radar (PolInSAR) data based on the random volume over ground (RVoG) model and polarization coherence tomography (PCT) theory, respectively. For each resolution cell, considering different forest vertical scattering structure functions to solve the corresponding forest height, the accuracy of PolInSAR forest height inversion will be improved. In this study, a forest vertical structure profile function and forest height inversion algorithm based on PCT technology was developed by using dual-baseline PolInSAR data. Then the deviation of forest height was corrected according to the inverted forest vertical structure. Finally, the LiDAR and PolInSAR data were employed to verify the proposed method. The experimental results show that the accuracy of the proposed method (tropical forest: RMSE = 5.96 m, boreal forest: RMSE = 3.11 m) is 25.5% and 30.43% higher than that of the dual-baseline RVoG model algorithm (tropical forest: RMSE = 8 m, boreal forest: RMSE = 4.47 m).
16 November 2022 in IEEE Geoscience and Remote Sensing Letters
Estimating vegetation height from polarimetric interferometric synthetic aperture radar (PolInSAR) data using the random volume over ground (RVoG) model has long been used. Most of these methods propose models and apply them to real airborne data to demonstrate their potential. The single-baseline PolInSAR forest height estimation based on the RVoG model lacks sufficient observation information. For this reason, multibaseline data are introduced to address this. This paper fits the relationship of model parameters in multibaseline observation scenarios, and focuses the forest height inversion on the calculation of pure volume decorrelation. Subsequently, a multibaseline forest height joint inversion method based on the least squares principle is adopted. Finally, we use airborne PolInSAR data from the Lope and Mondah sites collected by UAVSAR and F-SAR systems during AfriSAR 2016 to verify the proposed method. The experimental results show that the accuracy of the proposed method (Lope: root mean square error (RMSE) = 5.8 m, Mondah: RMSE = 5.12 m) is 38.1% and 34.53% higher than the coherence separation product (Lope: RMSE = 9.37 m, Mondah: RMSE = 7.82 m).
1 January 2026 in IEEE Transactions on Geoscience and Remote Sensing