Efficient oxygen evolution reaction (OER) electrocatalysts are highly desired in the field of water electrolysis and rechargeable metal-air batteries. In this study, a chelate polymer, composed of copper (II) and dithiooxamide, was used to derive an efficient catalytic system for OER. Upon potential sweep in 1 M KOH, copper (II) centers of the chelate polymer were transformed to CuO and Cu(OH)2. The carbon-dispersed CuO nanostructures formed a nanocomposite which exhibits an enhanced catalytic activity for OER in alkaline media. The nanocomposite catalyst has an overpotential of 280 mV (at 1 mA/cm2) and a Tafel slope of 81 mV/dec in 1M KOH solution. It has a seven-fold higher current than an IrO2/C electrode, per metal loading. A catalytic cycle is proposed, in which CuO undergoes electrooxidation to Cu2O3 that further decomposes to CuO with the release of oxygen. This work reveals a new method to produce an active nanocomposite catalyst for OER in alkaline media using a non-noble metal chelate polymer and a porous carbon. This method can be applied to the synthesis of transition metal oxide nanoparticles used in the preparation of composite electrodes for water electrolyzers and can be used to derive cathode materials for aqueous-type metal-air batteries.
Nickel oxyhydroxides (NiOOHs) are well-known for their superior activity toward oxygen evolution reaction (OER) in alkaline solutions. However, their activity toward oxygen reduction reaction (ORR) has been largely unexplored. There exist three NiOOH polymorphs: α-, β-, and γ-NiOOH, characterized by different interlayer spacing. Although still debated, γ-NiOOH with a large layer spacing has been indicated as the active phase for OER. Here, a highly crystalline γ-NiOOH was prepared in a carbon matrix by the in situ electrochemical transformation of nickel dithiooxamide Ni(dto) in 1 M KOH solution. The catalyst prepared in this way showed low overpotential not only for OER, but also for ORR in alkaline solutions. The onset potential for ORR is ~0.81 V vs. RHE, and the reaction proceeds via the 2e− transfer pathway. The high OER catalytic activity and relatively low ORR overpotential make this nanocomposite catalyst a good candidate for bifunctional OER/ORR catalyst, stable in alkaline solutions.
This work describes a new method for determining K+ concentration, [K+], in blood plasma using a smartphone with a custom-built optical attachment. The method is based on turbidity measurement of blood plasma solutions in the presence of sodium tetraphenylborate, a known potassium precipitating reagent. The images obtained by a smartphone camera are analyzed by a custom image-processing algorithm which enables the transformation of the image data from RGB to HSV color space and calculation of a mean value of the light-intensity component (V). Analysis of images of blood plasma containing different amounts of K+ reveal a correlation between V and [K+]. The accuracy of the method was confirmed by comparing the results with the results obtained using commercial ion-selective electrode device (ISE) and atomic absorption spectroscopy (AAS). The accuracy of the method was within ± 0.18 mM and precision ± 0.27 mM in the [K+] range of 1.5–7.5 mM when using treated blood plasma calibration. Spike tests on a fresh blood plasma show good correlation of the data obtained by the smartphone method with ISE and AAS. The advantage of the method is low cost and integration with a smartphone which offers possibility to measure [K+] on demand and in remote areas where access to hospitals is limited.