The simultaneous electroanalysis of acetaminophen (AC), guanine (G) and adenine (A) was successfully achieved on the zinc sulphide nanoparticles-modified carbon paste electrode (ZnS NPs/CPE) in phosphate buffer solution (PBS). Zinc sulphide nanoparticles (ZnS NPs) were prepared through a simple co-precipitation method and characterized via various spectroscopic techniques. The detailed studies confirmed that the as-synthesized ZnS NPs grew as high-density crystalline structures and they exhibit good electrocatalytic properties. The proposed method is selective and sensitive toward the development of an electrochemical sensor. The modified electrode showed acceptable reproducibility and stability under optimal conditions with high-accessible surface area and antifouling properties. The as-synthesized ZnS NPs enhanced the oxidation peak current and reduced the peak potential of AC, G and A. Furthermore, the sensor showed two linear ranges over the concentration from 1 to 15 μM and 15 to 120 μM. Based on the calibration plot, the limit of detection (LOD) was calculated and found to be 0.041, 0.036 and 0.031 μM for AC, G and A, respectively.
20 June 2017 in Journal of the Chinese Chemical Society
Diabetes mellitus is considered a serious medical issue that is the leading cause of mortality worldwide. Hence, there is a huge demand for developing efficient, reliable, and inexpensive non-enzymatic glucose sensors that can rapidly and accurately monitor glucose levels in physiological fluids. Herein, we developed an efficient and robust Ni/NiO@C composite as an electrocatalyst, which is synthesized via a simple co-precipitation method followed by a controlled annealing treatment. The resulting Ni/NiO@C composite has a spherical structure, yielding the salient features of large surface area, high structural void porosity, accessible surface-active edges, and redox-active centers of Ni2+/Ni3+ which could effectively improve the electrocatalytic oxidation for the detection of glucose. The detailed investigation revealed the electrochemical oxidation of glucose situated at 0.48 V with a wide linear range over the concentration from 0.5 μM to 2.0 mM. Based on the calibration plot, the limit of detection (LOD) and sensitivity were calculated to be 0.061 μM, and 9.73 μA cm−2 μM−1, respectively. The designed sensor's electroanalytical performance was effectively validated for the investigation of target species in actual samples. This work offers insights into the synergistic electrocatalytic activity of precious metal and enzyme-free catalysts for use in clinical diagnostics for the analysis of glucose molecules.