An ultra-deep L-shape foundation pit in a coastal area has recently been constructed and monitored. The project overview, geological conditions, excavation sequence and monitoring scheme are introduced in detail. The deformation of the retaining structure and surrounding strata are analyzed in detail through the measured data and 3D numerical simulation. The results show that the exceptional performance of the current project is due to the combination of under-excavation and over-excavation during construction. The under-excavation procedure restrained the wall deflections at the middle part of the diaphragm wall, making the corner effects at the corresponding side inapparent. Both the under-excavation and over-excavation procedure can only influence the performance of the excavation in close proximity, while having negligible impacts on the normally excavated areas. Based on the results of this study, practical suggestions are given to improve the performance of similar excavations in the future.

Simultaneous construction of adjacent projects may lead to emergencies in a foundation pit group, which significantly affects the deformation and safety of foundation pits. In this study, the deformation characteristics of a deep foundation pit group and the mutual interactions among the adjacent foundation pits were observed by a monitoring system during excavation. Field data of the foundation pit group, including the lateral deflections of the enclosure pile, the ground subsidence, as well as the vertical column movements, were analyzed and compared with individual excavations in Shanghai. The field data showed that the excavation of the adjacent foundation pit reduced the lateral deformation of the enclosure structure, caused by the reduction of active earth pressure acting on the retaining pile. Furthermore, the foundation pit excavated later caused upward movements of the soil between them. However, the foundation pit excavated earlier had a negligible influence on the vertical column movements of the foundation pit excavated later. Due to the optimized excavation sequence of the deep foundation pit group, the deformation of this special excavation was well controlled.

Our research proposes a unique coupled electro-thermal-mechanical model that takes electric breakdown and heterogeneity into account to show the mechanism of rock fracturing under high-voltage electropulses. Using finite element numerical software, the process of high voltage electrical pulse injection into the rock interior for breakdown is described, and the formation law of plasma channels during the electrical breakdown process is comprehensively analyzed in conjunction with the conductor particles present within the rock. On the basis of electrical, thermal, and mechanical theories, a coupled multi-physical field numerical model of rock failure under the action of high-voltage electrical pulses is developed, and a random distribution model is utilized to simulate the potential occurrence of conductor particles in the rock. Innovative numerical model indicates plasma channel creation in the rock-crushing process. Prior to the formation of the plasma channel, the temperature and stress are approximately 10³ k and 10⁻² MPa, respectively. Once the plasma channel is formed, the temperature and stress increase abruptly in a short time, with the temperature reaching 10⁴ k and the stress reaching 10³ MPa or higher. In addition, it is revealed that the breakdown field strength is the essential factor in plasma channel creation. The heterogeneity of the particles within the rock and the fluctuation in electrode settings are also significant variables influencing the creation of channels. The presented model contributes to a better understanding of the mechanism of rock fragmentation during high-voltage electrical pulses, which has substantial implications for oil exploration and mineral extraction.

An elastoplastic analysis scheme for the cylindrical cavity expansion in offshore islands unsaturated soils considering anisotropy is established. The hydraulic properties and anisotropy caused by stress of unsaturated soils are coupled in an elastoplastic constitutive matrix for unsaturated soil to obtain the governing equations for the cylindrical cavity expansion problem, with an analytical solution that utilizes the original hydro-mechanical state of the soil as the initial conditions. Through a comparative analysis with other analytical solutions, the effectiveness of the new solution is verified. Moreover, the swelling response of the cylindrical cavity expansion in unsaturated soils is examined by systematically analyzing different parameters of the surrounding soil. The findings reveal that the development and rate of anisotropy in normal consolidated soil and over-consolidated soil exert a significant impact on the soil’s mechanical characteristics. Nevertheless, the alteration in the model constant h has little effect on the soil’s mechanical characteristics. The analytical solution introduces anisotropy and broadens the expansion theory of unsaturated soils to yield a more comprehensive theoretical framework for the comprehensive analysis of offshore islands’ unsaturated soils.

This work aims to investigate and analyse the mechanism of rock failure under high-voltage electropulses in order to evaluate and increase the efficiency of high-voltage pulse technology in geological well drilling, tunnel boring, and other geotechnical engineering applications. To this end, this paper discusses the equivalent circuit of electric pulse rock breaking, the model of shock wave in electro channel plasma, and, particularly, the model of rock failure in order to disclose the rock failure process when exposed to high-voltage electropulse. This article uses granite as an example to present an analytical approach for predicting the mechanical behaviour of high-voltage electropulses and to analyse the damage that occurs. A numerical model based on equivalent circuit, shock wave model, and elasto-brittle failure criterion is developed for granite under electropulse to further examine the granite failure process. Under the conditions described in this study, and using granite as an example, the granite is impacted by a discharge device (Marx generator) with an initial voltage U₀ that is 10 kV and a capacitance F that is 5 µF before it begins to degrade at about 40 µs after discharge, with the current reaching its peak at approximately 50 µs. The shock wave pressure then attains a peak at about 70 µs. Dense short cracks form around granite and the dominant cracks grow to an average length of about 20 cm at around 200 µs. The crack width d_cr is predicted to be approximately 1.6 mm. This study detects dense cracks in a few centimetres surrounding the borehole, while around seven dominant cracks expand outward. The distribution of the length of the dominating cracks can be inhomogeneous because of the spatial heterogeneity of granite’s tensile strength, however the heterogeneity has an insignificant effect on the crack growth rate, total cracked area, or the number of main cracks. The mechanism of rock failure under electropulse can be well supported by the findings of numerical simulations and analytical studies.