A compatible fabrication technology for integrating InGaAs nMOSFETs and Ge pMOSFETs is developed based on the development of the two-step gate oxide fabrication strategy. The direct wafer bonding method was utilized to obtain the InGaAs-Insulator-Ge structure, providing the heterogeneous channels for CMOS integration. Superior transistor characteristics were achieved by optimizing the InGaAs gate oxide with a self-cleaning process in atomic layer deposition, and modifying the Ge gate oxide by the ozone post oxidation (OPO) technique, in the sequential two-step gate oxide fabrication process. With the combination of the gate-first fabrication process, superior on- and off-state characteristics, i.e., on current up to 8.3 µA/μm and leakage as low as 10−6 µA/μm, have been demonstrated in the integrated MOSFETs, together with the preferable symmetric output characteristics that promises excellent CMOS performances.
As a promising candidate for More Moore technology, InGaAs-based n-channel metal-oxide-semiconductor field-effect transistors (nMOSFETs) have attracted growing research interest, especially with InGaAs-on-insulator (InGaAs-OI) configurations aimed at alleviating the short channel effects. Correspondingly, the fabrication of an ultrathin InGaAs body becomes necessary for the full depletion of the channel, while the deteriorated semiconductor–insulator interface-related scattering could severely limit carrier mobility. This work focuses on the exploration of carrier mobility enhancement strategies for 8 nm body-based InGaAs-OI nMOSFETs. With the introduction of a bottom gate bias on the substrate side, the conduction band structure in the channel was modified, relocating the carrier wave function from the InGaAs/Al2O3 interface into the body. Resultantly, the channel mobility with an inversion layer carrier concentration of 1 × 1013 cm−2 was increased by 62%, which benefits InGaAs-OI device application in monolithic 3D integration. The influence of the dual-gate bias from front gate and bottom gate on gate stability was also investigated, where it has been unveiled that the introduction of the positive bottom gate bias is also beneficial for gate stability with an alleviated orthogonal electric field.