The re-burning of coal seams still occurs in coal fire areas after firefighting projects. A large amount of spontaneous combustion gas products is released from the surface fissure, which can cause air pollution and even threaten the production of surrounding mining areas. However, the distribution characteristics of fissure channels in the re-burning coal fire areas are local and scattered. Therefore, we developed a system for the in situ monitoring of spontaneous combustion gas emissions from fissure channels to conduct field investigations on the re-burning behavior of coal seams to explore the degree of re-burning in the coal fire area. The results showed that re-burning of the coal fire area induced fissure channels with different shapes. The CO₂ concentrations are always higher than the CO concentrations among the spontaneous combustion gas products discharged from the fissure channels. The degree of re-burning of coal seams at different study locations was comprehensively determined using simplified MCE and CO₂/CO ratios. The comprehensive factor α was obtained using the generalized principal component analysis (GPCA) by taking into account spontaneous combustion gas, meteorological factors, and the thermal physical characteristics of fissures. A carbon emission model for local fissure channels in the coal fire area was established, and the daily average carbon emissions at the study location were 2.56 t. Therefore, this provides essential theoretical support for taking corresponding fire extinguishing measures according to the degree of re-burning of the coal fire area.

Drilling for gas extraction is widely used as the main approach to manage gas in mines. However, gas leakage during borehole extraction reduces the root cause of the effectiveness of gas extraction. Given that forming a normal hole in the prominent coal seam of the Qingdong Coal Mine is impossible and that air leakage leads to difficulties in prepumping gas in the coal seam, we selected coal seam 3# as the object of this study. First, qualitative analysis determined that the air leakage channel restricted effective gas extraction. Second, short-hole grouting and plugging were proposed to increase the concentration and efficiency of gas extraction from the coal wall, forming a barrier by blocking the fissure network in the plastic zone of the surrounding rock of the coal roadway and preventing the air inside the roadway from penetrating into the coal seam and gas extraction drill holes. Finally, evaluation of the gas extraction efficiency between the grouting test and comparison areas indicated that the initial gas extraction concentration of a single hole could reach 89% when the depth of the selected blocking hole was 15 m. Grouting slowly decreased the gas extraction concentration from 72 to 25%, which effectively improved the speed at which the gas content was reduced in the coal body. The study findings provide a field basis for similar mines to improve their gas extraction efficiency and extend their extraction time.

Air-doors are important facilities for regulating the air flow in a mine ventilation network. It is of value to study the influence of air-doors, which are adjacent to a fire source on smoke back-layering in order to build a rational ventilation system. By regulating air-doors in a mine ventilation network test platform, two typical mine ventilation networks, with parallel branches and a diagonal branch, were constructed. During the study, into the closing degree of the air-doors adjacent to a fire source in a ventilation network with parallel branches, the back-layering length is up to 3.70 m when the ventilation velocity is 1.40 m/s. When the air-door on the return side of the adjacent branch is closed, the back-layering subsides within 1 min and the upstream temperature drops rapidly to normal. When the air-door is half closed, there is still a back-layering flow within 5 min. Smoke control, with the air-door is closed, is better than when the air-door is half closed. Based on this, tests into the influence of the closing position of air-doors, which are adjacent to a fire source, were carried out in a ventilation network with a diagonal branch. Results indicate that when the ventilation velocity is 1.70 m/s, the back-layering flow spreads to the diagonal branch, and the air flow velocity of both the adjacent branch and the diagonal branch increases. When closing the air-door on the return side of the adjacent branch, the back-layering rapidly subsided. The wind velocity on the intake side of the adjacent branch is stabilized after a rapid decrease, and the wind velocity of the diagonal branch is stabilized after a rapid increase. When closing the air-door on the intake side of the adjacent branch, the smoke from the diagonal branch spreads. Compared with closing the intake side air-door, closing the air-door on the return side of the adjacent branch is more effective in preventing back-layering. This work provides a reference for preventing back-layering and guiding the evacuation of people from the upstream of a fire source.

The development of coalfield fire areas not only leads to the wastage of coal resources but also results in the emission of a large quantity of spontaneous combustion gases, further exacerbating air pollution. Monitoring the spontaneous combustion gas products in coalfield fire areas is crucial. These gases are released to the surface through surface fissures and shallow soil layers. However, current monitoring methods for carbon emissions in coalfield fire areas often overlook the spontaneous combustion gas emissions from shallow soil regions. Therefore, this study focuses on CO2 and CO, which are the primary components in spontaneous combustion gases, and employs a self-developed multi-zone gas concentration monitoring system for coalfield fire areas. This system is used to capture the temporal variation patterns of spontaneous combustion gas concentrations and related parameters in shallow soil and fissure regions. The study further investigates the influence of surface meteorological factors on gas emissions in these areas, revealing the relationship between the gas emission patterns in shallow soil and fissure regions from both high-frequency and low-frequency data perspectives. The findings provide important theoretical insights for the rational assessment and improvement of carbon emission evaluations in coalfield fire areas.