In this paper, a portable residual stress tester and synchrotron radiation diffraction technique were used to measure the residual stress distribution of thick 2A14 aluminum alloy plates under different aging conditions after solution treatment. The stress changes after solution and aging were analyzed using metallographic structure observation, electron backscattered diffraction (EBSD), X-ray diffraction (XRD), and other characterization methods. The results show that after solution treatment at 500 °C and aging at 170 °C, the second phase precipitates, lattice distortion is released, and the stress level gradually decreases with aging time. The residual stress of the plate comprises compressive stress; there is stress concentration in the central area. The stress distribution obtained by the two residual stress calculation methods, cosα and sin²ψ, under different process conditions was consistent.

In this paper, based on in situ synchrotron radiation SAXS technology, the effects of stress field, temperature field and thermo-mechanical coupling conditions on the evolution of residual stress are discussed, respectively. The results show that the continuous increase of the external load led to the increase of the residual stress perpendicular to the tensile direction of the 2A14 aluminum alloy, and when the external load closed to the yield strength, the change of the residual stress was no longer significant. Under the action of temperature, the residual stress of 2A14 aluminum alloy reduced after the process of heating–holding–cooling. Under the action of thermo-mechanical coupling, the recovery effect of aluminum alloy was triggered, the energy storage of deformation was released, the lattice strain was reduced and the residual stress introduced by external load was reduced.