Casey Harwood

Prof. Casey Harwood

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 June 2016 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
CHCasey Harwood
Casey Harwood
YYYin L. Young
Yin L. Young
SCSteven L. Ceccio
Steven L. Ceccio
The atmospheric ventilation of a surface-piercing hydrofoil is examined in a series of towing-tank experiments, performed on a vertically cantilevered hydrofoil with an immersed free tip. The results of the experiments expand upon previous studies by contributing towards a comprehensive understanding of the topology, formation and elimination of ventilated flows at low-to-moderate Froude and Reynolds numbers. Fully wetted, fully ventilated and partially ventilated flow regimes are identified, and their stability regions are presented in parametric space. The stability of partially and fully ventilated regimes is related to the angle of the re-entrant jet, leading to a set of criteria for identifying flow regimes in a laboratory environment. The stability region of fully wetted flow overlaps those of partially and fully ventilated flows, forming bi-stable regions where hysteresis occurs. Ventilation transition mechanisms are classified as formation and elimination mechanisms, which separate the three steady flow regimes from one another. Ventilation formation requires air ingress into separated flow at sub-atmospheric pressure from a continuously available air source. Ventilation washout is caused by upstream flow of the re-entrant jet. The boundary denoting washout of fully ventilated flow is expressed as a semi-theoretical scaling relation, which captures past and present experimental data well across a wide range of Froude and Reynolds numbers.

1 January 2017 in Applied Mechanics Reviews
Verified
Journal Article
Closed access
PDF file
YYY. L. Young
Y. L. Young
CHCasey Harwood
Casey Harwood
FMF. Miguel Montero
F. Miguel Montero
JWJ. C. Ward
J. C. Ward
SCS. L. Ceccio
S. L. Ceccio
Ventilation is relevant to the performance, safety, and controllability of marine vessels, propulsors, and control surfaces that operate at or near the free surface. The objectives of this work are to (1) review the fundamental physics driving ventilation and its impact upon the hydrodynamic and structural response, and (2) discuss the scaling relations and its implications on the design and interpretation of reduced-scale studies. Natural ventilation occurs when the flow around a body forms a cavity that is open to the free surface. The steady flow regimes, hydrodynamic loads, and unsteady transition mechanisms of naturally ventilated flows are reviewed. Forced ventilation permits control of the cavity pressure and cavity shape, but can result in unsteady cavity pulsations. When a lifting surface is flexible, flow-induced deformations can increase the loading and the size of cavities, as well as lead to earlier ventilation formation. Ventilation tends to reduce the susceptibility of a lifting surface to static divergence. However, fluctuations of fluid added mass, damping, and disturbing forces caused by unsteady ventilation will change the structural resonance frequencies and damping, and may accelerate hydroelastic instabilities. Scaling relations are developed for both the hydrodynamic and hydroelastic response. Similarity in the three-dimensional (3D) ventilation pattern and hydrodynamic response requires simultaneous satisfaction of Froude number, cavitation number, and geometric similarity. However, Froude scaling complicates the selection of suitable model-scale material to achieve similarity in the dynamic hydroelastic response and material failure mechanisms between the model and full scale.

3 December 2019 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
CHCasey Harwood
Casey Harwood
Mario FelliMario Felli
Mario Felli
MFMassimo Falchi
Massimo Falchi
NGNitin Garg
Nitin Garg
SCSteven L. Ceccio
Steven L. Ceccio
YYYin L. Young
Yin L. Young
The fluid–structure interactions (FSI) of compliant lifting surfaces is complicated by free-surface and multiphase flows such as cavitation and ventilation. This paper describes the dynamic FSI response of a flexible surface-piercing hydrofoil in dry, wetted, ventilating and cavitating conditions. Experimental modal analysis is used to quantify the resonant frequencies and damping ratios of the fluid–structure system in each flow regime. The generalized hydrodynamic stiffness, fluid damping and fluid added mass are also determined as ratios to the corresponding structural modal forces. Added mass increases with increasing partial immersion of the hydrofoil and decreases in the presence of gaseous cavities. In particular, modal frequencies were observed to increase significantly in fully ventilated flow compared to fully wetted flow. The modal frequencies varied non-monotonically with speed in fully wetted flow. Gaseous cavities reduced the modal added mass and reduced the fluid disturbing force. Modal damping increases non-monotonically with increasing immersion depth. Forward speed causes the fluid damping force to increase with an approximately quadratic functional behaviour, consistent with a series expansion of the Morison equation, although damping identification became increasingly difficult at high flow speeds. The results indicate that fluid damping is greater than the associated structural damping in a quiescent liquid, and increasingly so with increasing immersion, suggesting viscous dissipation as a dominant mechanism. A preliminary investigation of modal vibration as a means of controlling the size and stability of ventilated cavities indicates that low-order modes encourage the formation of ventilation, while higher-order modes encourage the washout and elimination of ventilation.

24 October 2019 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
CHCasey Harwood
Casey Harwood
Mario FelliMario Felli
Mario Felli
MFMassimo Falchi
Massimo Falchi
SCSteven L. Ceccio
Steven L. Ceccio
YYYin L. Young
Yin L. Young
Compliant lift-generating surfaces have widespread applications as marine propellers, hydrofoils and control surfaces, and the fluid–structure interactions (FSI) of such systems have important effects upon their performance and stability. Multi-phase flows like cavitation and ventilation alter the hydrodynamic and hydroelastic behaviours of lifting surfaces in ways that are not yet completely understood. This paper describes experiments on one rigid and two flexible variants of a vertical surface-piercing hydrofoil in wetted, ventilating and cavitating conditions. Tests were conducted in a towing tank and a free-surface cavitation channel. This work, which is Part 1 of a two-part series, examines the passive, or flow-induced, fluid–structure interactions of the hydrofoils. Four characteristic flow regimes are described: fully wetted, partially ventilated, partially cavitating and fully ventilated. Hydroelastic coupling is shown to increase the hydrodynamic lift and yawing moments across all four flow regimes by augmenting the effective angle of attack. The effective angle of attack, which was derived using a beam model to account for the effect of spanwise twisting deflections, effectively collapses the hydrodynamic load coefficients for the three hydrofoils. A generalized cavitation parameter, using the effective angle of attack, is used to collapse the lift and moment coefficients for all trials at a single immersed aspect ratio, smoothly bridging the four distinct flow regimes. None of the hydrofoils approached the static divergence condition, which occurs when the hydrodynamic stiffness negates the structural stiffness, but theory and experiments both show that ventilation increases the divergence speed by reducing the hydrodynamic twisting moment about the elastic axis. Coherent vortex shedding from the blunt trailing edge of the hydrofoil causes vortex-induced vibration at an approximately constant Strouhal number of 0.275 (based on the trailing edge thickness), and leads to amplified response at lock-in, when the vortex-shedding frequency approaches one of the resonant modal frequencies of the coupled fluid–structure system.

1 February 2018 in Journal of Fluids and Structures
Verified
Journal Article
Closed access
JWJ.C. Ward
J.C. Ward
CHCasey Harwood
Casey Harwood
YYY.L. Young
Y.L. Young

1 April 2020 in Journal of Fluids and Structures
Verified
Journal Article
Closed access
YYY.L. Young
Y.L. Young
TWT. Wright
T. Wright
HYH. Yoon
H. Yoon
CHCasey Harwood
Casey Harwood