Boron nitride nanosheet (BNNS)-based thermal management materials (TMMs) are increasingly vital in the rapidly evolving electronics industry but face limitations due to the anisotropic thermal conductivity of BNNS. Here, by ultrafast sintering, we synthesized cohesive BNNS microspheres (CBMs) with good processability and a strong ability to build isotropic thermally conductive pathways in various types of TMMs. This process produced the rapid fusion of BNNSs into spheres with a smooth surface, which weakens particle interactions and thus improves the ability to fill space including free-flowing properties (a low angle of repose of 21.6°) and dense packing behavior (a high tap density of 0.457 g cm−3). Additionally, such structure also allows for uniform distribution of stress under intense shearing, leading to a strong disintegration resistance which improves the processability and the quality of dispersal. By simple mixing, an isotropic thermal conductivity of 10.4 W m−1 K−1 was achieved with 65 wt% of CBM in the composite. Benefiting from its great processability and thermal conductivity enhancing ability, CBM was fabricated into various types of TMM such as pre-cured (pad), fluidic (grease), and in situ cured (adhesive, potting compound) products, all of which outperform industrial products. CBM represented a significant advancement in the development of high-performance TMMs, especially in high-efficiency fabrication and product diversity.
A thin graphene oxide(GO) coating was electrophoretically deposited on Pt/Ir neural electrodes. Followed by electrochemical reduction, the rGO coated electrodes exhibited excellent biocompatibility and improved in vivo neural recordings.
High heat fluxes challenge electronic thermal management, as phase change materials (PCMs) suffer from low heat transfer efficiency. In this work, we present a convection enhanced strategy using molten phase transport in phase change composites (PCCs). We fabricate porous fibers with over 90 vol% interconnected core channels and a dense, conductive shell via nonsolvent induced phase separation (NIPS). Experimental and numerical analyses reveal that specific channel structures activate internal convection, contributing over 100% more than intrinsic thermal conduction. Optimized PCC fibers achieve a thermal conductivity of 1.05 W·m−1·K−1 with only 3 wt% additives, which increases to 2.48 W·m−1·K−1 upon melting, outperforming fibers with substantially higher intrinsic conductivity. Device-level demonstrations confirm the thermal buffering potential of our PCC fibers. Overall, this work highlights the vital role of thermal convection, which is often overlooked, in the design and evaluation of PCCs.
5 September 2025 in Journal of Materials Chemistry A
The fabrication of compact, highly thermally conductive 2D material-based fibers has remained challenging due to difficulties in achieving both structural integrity and alignment. Here, we present a restrained reshaping process combined with ultrafast sintering to produce boron nitride nanosheet (BNNS) all-ceramic fibers (BACFs) with exceptional properties. The core restrained reshaping process converts uniaxial pressure into circumferential compression, enabling regulated deformation with continuous stress transfer. This approach yields fibers with a high relative density (86.4%) and superior BNNS alignment (Herman's orientation parameter = 0.789). The good densification and orientation facilitate BNNS fusion with enhanced grain contact during sintering, achieving a record-high thermal conductivity of 42.1 Wm−1 K−1 and excellent mechanical flexibility (bending radius <0.3 mm). The unique alignment of BNNSs in BACFs enhances both intra-fiber and inter-fiber thermal conductivity when woven into fabrics, demonstrating superior heat dissipation performance. This work establishes restrained reshaping as a scalable and versatile method for developing high-performance thermal management materials and dense 2D material-based fibers.