Hexagonal boron nitride (h-BN) microparticles, modified by surface coupling agent 3-aminopropyl triethoxy silane (APTES), were used to fabricate thermally conductive epoxy/BN composites, and the effects of modified-BN content on the thermal and insulating properties were investigated. It was found that incorporation of h-BN particles in the epoxy matrix significantly enhanced the thermal conductivity of the composites. With 30 wt% modified-BN loading, the thermal conductivity of the composites was 1.178 W m−1 K−1, 6.14 times higher than that of the neat epoxy. Fabricated epoxy/BN composites exhibited improved thermal stability, storage modulus, and glass transition temperature with increased BN content. The composites also possessed excellent electrical insulation properties. These results revealed that epoxy/BN composites are promising as efficient heat-releasing materials for thermal management and microelectronic encapsulation.
Hexagonal boron nitride micro particles functionalized by γ-MPS, were used to fabricate PI/BN composites. The thermal conductivity of the composites with 40 wt% m-BN content was increased to 0.748 W m−1 K−1, 4.5 times higher than that of the pure PI.
Based on the template-induced self-assembly characteristic of cyclomatrix polyphosphazene micro–nanometer materials, novel poly(cyclotriphosphazene-co-bisphenol A)-coated boron nitride (PCB-BN) was designed and synthesized by in situ condensation polymerization on the surfaces of boron nitride (BN) particles using the reaction of hexachlorocyclotriphosphazene (HCCP) with bisphenol A (BPA). It was found that the incorporation of PCB-BN particles in the epoxy matrix significantly enhanced thermal conductivity of the epoxy composites. With 20 wt% PCB-BN loading, the thermal conductivity of the EP/PCB-BN composites was 0.708 W m−1 K−1, which was 3.7 times higher than that of the neat epoxy. Meanwhile, the EP/PCB-BN composites possessed good electrical insulation and thermal stability simultaneously. The composites fabricated also exhibited improved flame retardation and superior dimensional stability during combustion.
14 November 2007 in Journal of Applied Polymer Science
Polyacrylic pressure-sensitive adhesives (PSAs) based on butyl acrylate (BA), 2-hydroxyethyl acrylate (HEA), and acrylic acid (AA) were prepared by a bulk polymerization process triggered by a radical photoinitiator under UV irradiation and UV-crosslinking. 1,6-Hexanediol diacrylate (HDDA) with difunctional groups was introduced into the PSAs to modify semi-interpenetrating network structures. The effect of HDDA content on the pressure-sensitive performance was comprehensively tested. The viscosity of the prepolymer was measured by a rotational viscometer. Prepolymers obtained by a photoinduced process and UV crosslinking process were confirmed via Fourier transform infrared spectroscopy (FTIR). All double bonds participated in the copolymerization without any remaining monomers, which reflected the concept of green environmental protection. Gel content in the crosslinked portion was examined by Soxhlet extraction, whilst the soluble molecular weight of PSAs was characterized by gel permeation chromatography (GPC). The viscoelastic properties of polymer films were determined by dynamic mechanical analysis (DMA). The Tg value and storage modulus (G′) of the PSAs were enhanced with the addition of HDDA. Moreover, three fundamental adhesive properties, i.e. loop tack force, peel force and shear strength of PSAs, were measured. The results showed that UV crosslinking technology achieved a good balance of the three forces with excellent pressure-sensitive properties.
About Me
Xiongwei Qu received a Ph.D. degree from Beijing University of Chemical Technology, Beijing, China
Xiongwei Qu received a Ph.D. degree from Beijing University of Chemical Technology, Beijing, China