The quality of satellite clock offset affects the performances of positioning, navigation and timing services, and thus it is essential to the Global Navigation Satellite System (GNSS). This research focuses on the estimation of BeiDou Navigation Satellite System (BDS) real-time precise satellite clock offset by using GNSS stations located in the Global and Asia-Pacific region based on the mixed-difference model. The precision of the estimated BDS clock corrections is then analyzed with the classification of the orbit types, satellite generations, and atomic clock types. The results show that the precision of the BDS clock offset estimated in the Asia-Pacific for Geosynchronous Earth Orbit (GEO), Inclined Geosynchronous Satellite Orbit (IGSO) and Medium Earth Orbit (MEO) satellites are 0.204 ns, 0.077 ns and 0.085 ns, respectively, as compared to those of clock offsets estimated in globally distributed stations. The average precision of the BDS-3 satellites clock offset estimated in global region is 0.074 ns, which is much better than the 0.130 ns of BDS-2. Furthermore, analyzing the characteristics of the corresponding atomic clocks can explain the performance of the estimated satellite clock offset, and the stability and accuracy of various parameters of the Passive Hydrogen Maser (PHM) atomic clocks are better than those of Rubidium (Rb) atomic clocks. In the positioning domain, the real-time clocks estimated in the global/Asia-Pacific have been applied to BDS kinematic Precise Point Positioning (PPP) in different regions. The Root Mean Square (RMS) of positioning results in global real-time kinematic PPP is within 4 cm in the horizontal direction and about 6 cm in the vertical direction. Hence, the BDS real-time clock offset can supply the centimeter-level positioning demand around the world.

The third generation of China’s BeiDou Navigation Satellite System (BDS-3) began to provide global service at the end of 2018, and the completion of BDS was announced in July 2020, which includes GEO (Geostationary Earth Orbit), IGSO (Inclined Geosynchronous orbit), and MEO (Medium Earth Orbit) satellites. The resulting BDS orbits vary due to the inconsistent alignment strategies used by different analysis centers. Therefore, it is necessary to study the method of determining the BDS-3 orbit products combined from different analysis centers. In this research, the accuracy of the combined orbits for BDS-3 and other GNSS systems is evaluated and analyzed. To verify the reliability of the orbit combination method proposed in this paper, the GPS orbit is first selected for verification. Compared to the analysis centers, the mean Signal in Space User Ranging Error (SISURE) for GPS combined orbits is significantly reduced, and the mean SISURE of combined orbits for Block IIF, Block IIR, and Block III is 4.15 mm, 5.43 mm, and 5.63 mm, respectively. This demonstrates the effectiveness of the orbit combination method in this research. Besides, the accuracy of the combined orbits is improved by the ERP correction, and the mean RMS of the without Earth rotation Parameters (ERP) correction orbits and with ERP correction orbits is 4.78 mm and 4.53 mm, respectively. This demonstrates that orbit consistency corrections should be considered when performing orbit combinations. Compared to the GFZ orbits, the accuracy of the combined orbits has improved for GPS, GLONASS, GALILEO, and BDS is 8.2%, 9.9%, 9.9%, and 5.5%, respectively. It shows that the orbit combination method improves the orbital accuracy compared to the individual analysis center orbits. The mean RMS of the combined orbits for GPS, GLONASS, GALILEO, BDS MEO, and BDS IGSO is 1.7 cm, 2.61 cm, 2.52 cm, 2.59 cm, and 4.90 cm, respectively. The results demonstrate that the accuracy of the combined orbit for the BDS-3 MEO satellite is already similar to other systems; an orbit combination also available for the BDS-3 satellite.

With the continuous development of the Global Navigation Satellite System (GNSS), the calculation theory and strategy of the global Satellite Clock Bias (SCB) tends to be mature. However, in some eventualities with restricted conditions, the calculation and application of the global SCB are limited; hence, the application of regional SCB is derived. This paper focuses on the quality of regional SCB products in different regions, calculates three groups of regional SCB products, and analyzes their properties and application effects. We expand the double-differenced assessment method for SCB and extend satellite clock accuracy assessment to regional satellite clock products. Additionally, the Regional Effect Bias (REB) is introduced to analyze the influence of the relative position of satellite geometry on the SCB products due to the regional effects. The conclusions are as follows: (1) In low-latitude regions, SCB products have a high degree of completeness and a large number of satellite observations, which is conducive to expanding the positioning application range of regional SCB; (2) the low-latitude regions SCB will be affected by ionospheric activity, and the accuracy will be slightly lower than that of satellite clocks deviation in mid-latitudes; (3) in this paper, the REB in this area is in the level of 10⁻⁷. The experiment displays the result that the values of REB in low-latitude areas are larger, leading to fluctuated Precise Point Position (PPP) results. However, there are fewer stations in the mid-latitude regions, which will also affect the accuracy of PPP; (4) the accuracy of the positioning results of the regional satellite clock deviation in the Chinese region is higher than that of the global clock.