Micro-nanostructures, element doping and structural defects are three pivotal factors that determine the photocatalytic activity of the graphitic carbon nitride polymer. Green and additive-free construction of the above three-in-one carbon nitride (CN) based materials is extremely challenging. Herein the target hierarchical carbon nitride tube with a pipe-in-pipe double-layer and porous coral-like architecture as well as oxygen doping and carbon defects is successfully obtained via a self-templating method. Melamine is the only precursor in the whole process, and there are no harmful solvents or cross-linking agents used for self-assembly with cyanuric acid, which comes from melamine under hydrothermal treatment. Surpassing the simple hollow carbon nitride tube, this hierarchical hollow structure, which is clearly visualized by 3D electron tomography, offers more contact sites and creates new heterogeneous catalytic interfaces synergistically. Hence, the as-prepared photocatalyst achieves a satisfactory hydrogen yield, ascribed to the large surface area, short charge transfer distance, light scattering, fast mass transfer and suitable bandgap with midgap states. This eco-friendly method provides a new opportunity for designing novel micro-nanostructures with desirable performance in solar-to-chemical energy conversion.
Na metal is regarded as a promising anode for Na batteries owing to its high specific capacity and natural abundance. However, rapid dendrite growth and low reversibility hinder its practical applications. Building an artificial solid electrolyte interphase (SEI) is an effective strategy to stabilize a Na metal anode, yet it still does not achieve high current density and cycling capacity. Here, two artificial SEI layers were constructed through analogous reactions between Na metal and pure SnCl4 liquid (SnCl4–Na electrode) or diglyme solvent with an SnCl2 additive (SnCl2–Na electrode) to investigate the key parameters for an excellent artificial SEI. Both simulations and experiments demonstrate that the high-uniformity and high Na+ diffusion properties of the SnCl4-derived protective layer are significant for stabilizing Na metal anodes under rigorous test conditions. Therefore, the SnCl4–Na electrode protected by a homogeneous and high Na+ diffusion Na–Sn alloy and NaCl achieves an ultralong cycle life of 4000 h and small voltage hysteresis (∼100 mV) with a cycling capacity of 3 mA h cm−2 at 2 mA cm−2, which is much better than that of the SnCl2–Na electrode. Moreover, even with a cycling capacity of 5 mA h cm−2 at 5 mA cm−2, the SnCl4–Na electrode can stably run for ∼1500 h. Benefiting from the durable SEI layer, a stable capacity of ∼350 mA h g−1 is observed on a SnCl4–Na|FeS2 full cell for 380 cycles.
Knowledge of the interfacial structure of nanocomposite materials is a prerequisite for rational design of nanostructured photocatalysts. Herein, TiO2 and g-C3N4 2D/2D nanocomposites were fabricated from three distinct synthetic protocols (i.e., co-calcination, solvothermal treatment and charge-induced aggregation), showing different degrees of enhancement (1.4–6.1 fold) in the visible-light induced photocatalytic hydrogen evolution reaction compared to the simple physical mixture. We propose that the interfacial Ti–O–N covalent bonding promotes the charge carrier transfer and separation more effectively than the electrostatic interaction, thus accelerating the photocatalytic H2 production. Meanwhile, the exposed surface area of TiO2 in the composite needs to be enlarged for deposition of the co-catalyst. This research sheds light on the rational design of hybrid nanocomposites based on earth-abundant elements for photocatalysis.
28 July 2023 in Angewandte Chemie International Edition