This paper is aimed at giving an overview of possible cooling technologies for electrical machines and their assessment for aviation applications, e.g., fan or propeller drives. The most important demand for aircraft is the minimization of the drive system weight comprising electrical machine, power electronics, and the cooling system. The potential of aluminum winding an overview about several cooling technologies with the Rankine or Brayton cycle or utilizing the phase change of the cooling fluid is given. As an alternative approach, the cooling structure inside the machine is studied. A very interesting potential was discovered with direct slot cooling (DSC) removing the heat where it is produced and, thus, simplifying the cooling system effort and its weight. Since it is one of the most promising approaches, this cooling method is studied in depth. Furthermore, it can also be combined with one of the cooling technologies discussed above.
New aerodynamic aircraft concepts enable the storage of volumetric liquid hydrogen (LH2). Additionally, the low temperatures of LH2 allow technologies such as the superconductivity of electrical components. An increased power density of the onboard wiring harness and the electrical machine can be expected. Nevertheless, the power electronic drive inverter has to deliver high power and high switching frequencies (fPWMs) under challenging conditions. Therefore, knowledge of the electric behaviour of different semiconductor materials under cryogenic temperatures is essential to answer the question: "Are modern power electronics a technology enabler or a system bottleneck?" This publication shows a comprehensive novelty study for cryogenic power electronics based on experimental-driven semiconductor investigations, mission profile-based considerations, requirement analyses of superconducting electrical machines, and studies of the cooling concepts. All aspects are discussed within one interdisciplinary publication. A cryogenic system cannot be considered without a feasible cooling concept. Different semiconductor structures based on various materials (silicon (Si), silicon carbide (SiC) and gallium nitride (GaN)) are evaluated for their suitability. The collected data and the literature review draw a technology feasibility studies supported by detailed cooling system analyses and superconducting electrical machine requirements. The power demand and high fPWM lead to a SiC non-cryogenic inverter approach. Due to the detailed cooling system assessment, a loss reduction is achieved by optimising the junction temperature (TJ) under various load cases (LCs) out of the mission profile.
Through applying an exemplary design study, the dependencies between current density, temperatures, and weight in an electrical drive system for a small range aircraft with conventional electrical fan or propeller drives are evaluated. This study applies a combined numerical (Finite Element Method FEM) and analytical approach to the machine design, calculation of temperatures, and cooling system design (cooler, pumps, piping). A design scenario was defined using start and climb flight in a warm tropical surrounding as the worst load case. The design has to move between two fixed temperature limits: The maximum allowable temperature in the machine insulation and the ambient temperature. The implemented method facilitates a comparatively fast-medium depth design of the drive system. The derived results show, in fact, a minimum of weight at a certain current density, which is one of the key interests for the designers of the electrical machine. The main influences on this minimum are the temperature drops in the machine, the heat transfer to the cooling fluid, the heat transfer to the cooler wall, and the remaining heat rejection to the ambient. Method and results are transferable to other types of airplanes with different ratings.
New aerodynamic aircraft concepts enable the storage of volumetric liquid hydrogen (LH2). Additionally, the low temperatures of LH2 enable technologies such as the superconductivity of electrical fan drives and power distribution components. An increased power density of the onboard wiring harness and the electrical machine can be expected. The highest system efficiency and the smallest fuel and tank weight will be achieved with a highly efficient energy conversion by the fuel cell from LH2 to electrical energy. This publication shows a comprehensive study for cryogenic fan drives based on experimental-driven tape superconductor investigations, mission profile-based considerations, design analyses of superconducting electrical machines, and studies of the cooling concepts. A cryogenic system cannot be considered without a feasible cooling concept. Here, an approach with a safe He-based cooling system is proposed, using the LH2 flow to the fuel cell as a heat sink for the losses in the electrical system.
The neutron electric form factor has been measured at the cw electron accelerator MAMI in the double polarized exclusive reactions and in quasi elastic kinematics with one common detector system. Experimental set-up and analysis of a -measurement in the range of momentum transfer are discussed in this article. For events with low missing momentum the PWIA analysis yields with statistical and systematical error, corresponding to a quadratically added total error of 11.6% relativ. This result will be compared with preliminary results obtained from the -reaction and with data from elastic scattering.