Advanced metallurgical processing techniques are required to produce aluminum matrix composites due to the tendency of the reinforcement particles to agglomerate. In this study, graphene nano-platelet reinforcement particles were effectively incorporated into an automotive A319 aluminum alloy matrix using a liquid metallurgical route. Due to its low density, it is a highly difficult task to produce an aluminum matrix composite reinforced with graphene. Hence, this study explored a novel approach to prevent particle floating to the melt surface and agglomeration. This was achieved via a hybrid semi-solid stirring of A319, followed by ultrasonic treatment of the liquid melt using a sonication probe. The microstructure and graphene particles were characterized using optical microscopy and scanning electron microscopy. Furthermore, the interfacial products produced with the incorporation of graphene in liquid aluminum were analyzed with X-ray diffraction. The tensile test results exhibited 10, 11 and 32% improvements in ultimate tensile strength, yield strength, and ductility of A319 reinforced with 0.05 wt.% addition of graphene. Analysis of strengthening models demonstrated primary contribution from Hall-Petch followed by CTE mismatch and load bearing mechanism. The results from this research enable the potential for using cost-effective, efficient and simple liquid metallurgy methods to produce aluminum reinforced graphene composites with improved mechanical properties.
1 December 2022 in Journal of Magnesium and Alloys
Ultrasonic processing in the liquid state has been identified as an effective method to improve the mechanical properties of Al and Mg alloys. Ultrasonic melt processing is capable of enhancing material properties through the application of high-frequency, high-power vibrations that form cavitation bubbles which pulsate and collapse throughout the melt volume. Thus, this technology has excellent potential in engineering high performance lightweight materials. With global trends converging toward greener energy, reduced greenhouse gas (GHG) emissions and increasingly stringent efficiency standards, lightweight and high-strength alloys such as aluminum (Al) and magnesium (Mg) are becoming an area of high interest. The aim of this review is to analyze the literature on ultrasonic processing of Al and Mg alloys in the last 15 years. This review discusses ultrasonic processing equipment, experimental set-ups, mechanisms of ultrasonic cavitation and acoustic streaming. As well, the effects of processing time, vibrational amplitude, and temperature on microstructure and properties are elucidated. Furthermore, it aims to investigate how a combination of sonication and particle reinforcement can affect the properties of Al and Mg alloys. The challenges of ultrasonic processing have been identified and expanded on in this review. This includes energy consumption, equipment complexity, temperature control, process optimization and limited industrial adoption.