Macauba palm fruits (Acrocomia aculeata and Acrocomia totai) are emerging as sources of high-quality oils from their pulp and kernels. The protein-rich macauba kernel meal (MKM) left after oil extraction remains undervalued, mainly due to the lack of suitable deoiling parameters and integrated protein recovery methods. Therefore, the present study aimed to produce protein concentrates from MKM using sieve fractionation. The deoiling parameters, comprising pressing, milling, and solvent extraction, were improved in terms of MKM functionality. The combination of hydraulic pressing, milling to 1 mm, and the hexane extraction of A. aculeata kernels resulted in MKM with the highest protein solubility (77.1%), emulsifying activity index (181 m2/g protein), and emulsion stability (149 min). After sieve fractionation (cut size of 62 µm), this meal yielded a protein concentrate with a protein content of 65.6%, representing a 74.1% protein enrichment compared to the initial MKM. This protein concentrate showed a reduced gelling concentration from 8 to 6%, and an increased emulsion stability from 149 to 345 min, in comparison to the MKM before sieving. Therefore, sieve fractionation after improved deoiling allows for the simple, cheap, and environmentally friendly recovery of MKM proteins, highlighting the potential of macauba kernels as a new source of protein.
Alginate-ZnO nanoparticles (ZnOnano) composite wound dressing membranes were prepared with two different ZnOnano concentrations (0.03 and 0.20 g ZnO/g sodium alginate) and cross-linked with two different calcium treatments (low and high Ca++concentration) to evaluate the influence of nanoparticle content and cross-linking degree on membrane attributes. ZnOnano addition did not significantly alter the mechanical properties, water vapor permeability, swelling degree in water and the alginate amorphous nature of the nanocomposite membranes. The increase in cross-linking degree, on the other hand, altered the microstructure of the membranes, increased the tensile strength and reduced the water vapor permeability of the nanocomposite membranes. The presence of ZnOnano in alginate membranes granted them antibacterial activity in vitro against Pseudomonas aeruginosa and Staphylococcus aureus and substantially increased the absorption capacity in phosphate buffer and fetal bovine serum solutions, validating their potential use as wound dressings.
14 January 2025 in International Journal of Biological Macromolecules
Macauba fruit pulp (Acrocomia aculeata) is an emerging oil source. After de-oiling, the macauba pulp meal (MPM) offers a dietary fiber content of 40-50 %, which mainly comprises cell wall polysaccharides (CWP). The present work aimed to assess the potential of MPM as an innovative source of sustainable food polysaccharides. To this end, the macauba CWP were fractionated into water-soluble galactoglucomannans (21.7 %), calcium- and ester-bound pectins (3.4 %), loosely-bound xyloglucans (27.6 %), strongly-bound xylans (6.5 %), and a cellulose-rich fraction (39.3 %). The galactoglucomannans produced shear-thinning aqueous dispersions with an increase in consistency index from 3.03·10-2 to 3.58·101 Pa·sn by increasing the concentration from 1.0 to 5.0 %. The galactoglucomannans dispersions showed semi-dilute behavior, evidenced by relaxation times ranging from 1.24·10-2 to 1.17 s for concentrations from 2.5 to 10.0 %. Macauba pectins and xyloglucans showed weak gel behavior, with an increase in yield stress from 3.20·10-1 to 1.04·102 Pa and from 7.01·10-2 to 1.35·102 Pa for dispersions at 2.5 to 10.0 %, respectively. 2.5 to 5 times higher concentration of macauba polysaccharides is needed to obtain rheological behavior similar to guar and xanthan gum. The thickening and gelling properties of macauba CWP highlight their potential as thickeners and stabilizers for the food industry.