Lihua Wang

Lihua Wang


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2022 in Processes
Verified
Journal Article
Open access
PDF file
WJWei Jiang
Wei Jiang
LWLihua Wang
Lihua Wang
JTJun Tang
Jun Tang
YYYanchao Yin
Yanchao Yin
HZHao Zhang
Hao Zhang
QWQike Wei
Qike Wei
To study the contact parameters of the tobacco strips during redrying, in this study, the funnel stacking test is used to determine the stacking angle, and the discrete element method is used to simulate the formation process of the stacking angle, to calibrate and verify the physical and contact parameters of tobacco strips. The Placket–Burman test was used to screen out the parameters that had significant effects on the stacking angle. The regression response surface model between the stacking angle and contact parameters was established by Central Composite Design using the stacking angle from physical tests as the response index. The test results show that static and rolling friction coefficients between tobacco strips have significant effects on the test results, so these two parameters must be accurately calibrated. Finally, the accuracy and validity of the calibrated tobacco strips contact parameters were verified by comparing the stacking angle and void ratio of physical and simulation experiments. The calibration results can provide basic parameters for studying the interaction and motion of the tobacco strips in the redrying process using simulation methods.

3 March 2021 in Archive of Applied Mechanics
Verified
Journal Article
Closed access
PDF file
JLJiaqi Li
Jiaqi Li
LWLihua Wang
Lihua Wang
BYBo Yan
Bo Yan

22 August 2024 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
Yanlei YinYanlei Yin
Yanlei Yin
LWLihua Wang
Lihua Wang
Dinh Thai HoangDinh Thai Hoang
Dinh Thai Hoang
Wenbo WangWenbo Wang
Wenbo Wang
DNDusit Niyato
Dusit Niyato
In the process industry, long-term and efficient optimization of production lines requires real-time monitoring and analysis of operational states to fine-tune production line parameters. However, complexity in operational logic and intricate coupling of production process parameters make it difficult to develop an accurate mathematical model for the entire process, thus hindering the deployment of efficient optimization mechanisms. In view of these difficulties, we propose to deploy a digital twin of the production line by encoding its operational logic in a data-driven approach. By iteratively mapping the real-world data reflecting equipment operation status and product quality indicators in the digital twin, we adopt a quality prediction model for production process based on self-attention-enabled temporal convolutional neural networks. This model enables the data-driven state evolution of the digital twin. The digital twin takes a role of aggregating the information of actual operating conditions and the results of quality-sensitive analysis, which facilitates the optimization of process production with virtual-reality evolution. Leveraging the digital twin as an information-flow carrier, we extract temporal features from key process indicators and establish a production process quality prediction model based on the proposed deep neural network. Our operation experiments on a specific tobacco shredding line demonstrate that the proposed digital twin-based production process optimization method fosters seamless integration between virtual and real production lines. This integration achieves an average operating status prediction accuracy of over 98% and a product quality acceptance rate of over 96%.

1 January 2021 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
LWLihua Wang
Lihua Wang
ZZZemin Zhao
Zemin Zhao
JWJiongli Wang
Jiongli Wang
XLXianzeng Li
Xianzeng Li
YHYayu Huang
Yayu Huang
TYTingqiang Yao
Tingqiang Yao
To study the mechanical characteristics of ballasted bed under dynamic stability, a three‐dimensional discrete element model of ballasted bed with 1000 mm × 700 mm × 550 mm is established based on the discrete element method. Meanwhile, a simulation test bench with the same size is built for simulation analysis and experimental research. The variation law and trend of settlement, lateral resistance, and compactness of ballasted bed under different excitation frequencies are analyzed comprehensively. The results show that when the excitation frequency is constant, the lateral resistance of sleeper, the settlement of sleeper, and the compactness of track bed under sleeper increase first and then tend to be stable. With the increase in horizontal excitation frequency, lateral resistance of ballast bed, sleeper settlement, and compactness first increase and then decrease after stable operation. The values of these parameters are maximized when the excitation frequency is 36 Hz which is the relative optimal horizontal excitation frequency of this model.

12 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HWHuaiyu Wang
Huaiyu Wang
LWLihua Wang
Lihua Wang
WJWei Jiang
Wei Jiang
QWQike Wei
Qike Wei
HZHao Zhang
Hao Zhang
To study the rewetting characteristics of tobacco strips during the redrying stage, a conjugate heat and mass transfer model of tobacco strips was established based on their physical properties. The fundamental relationship between the multiphysical fields and humidity fields of tobacco strips and the key process parameters was considered in this model, and the feasibility of the model was verified via experiments. Based on this model, the transfer and variation laws of the moisture content, humidification rate, and temperature of tobacco strips under different relative humidity and temperature conditions were studied, and the rewetting process parameters of tobacco strips were determined using COMSOL Multiphysics. The results show that this model can be used to study the rewetting characteristics of tobacco strips during the redrying stage. The rewetting of tobacco strips can be divided into two stages, namely, the accelerated stage and approximate constant rate increase stage, where the former stage has a greater impact on the rewetting effect. The higher the relative humidity and temperature, the greater the change in the moisture content, humidification rate, and effective moisture diffusivity, and the faster the increase rate. The best rewetting effect was achieved when the relative humidity was 85% and the temperature was 55 °C. Under these conditions, the moisture content of the tobacco strips was 11% to 13%, the humidification rate was 0.03 %/s to 0.29 %/s, the highest effective moisture diffusivity was 7.8 × 10−10 m2/s, and the maximum activation energy was 37.86 kJ/mol. This study provides a theoretical basis and data support for analyzing the characteristics of the rewetting process and for optimizing the process parameters.

10 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
QWQike Wei
Qike Wei
LWLihua Wang
Lihua Wang
WJWei Jiang
Wei Jiang
HWHuaiyu Wang
Huaiyu Wang
HZHao Zhang
Hao Zhang
To accurately study the drying characteristics of tobacco strips in the process of redrying, a discrete heaped physical model of tobacco strips is built. Based on this model, a convective drying multiphase porous media model of the heaped tobacco strips is established, which considers the binary diffusion and transport of vapor inside and outside the tobacco leaf. The model is solved using COMSOL Multiphysics, and the accuracy of the model is verified by experiments. The changes in hot air velocity, vapor and moisture content, and evaporation rate in heaped tobacco strips with different thicknesses are analyzed. The results show that: it is feasible to study the drying characteristics of tobacco strips in redrying using a discrete heaped model; there were significant differences in water content, evaporation rate, and temperature in different regions of heaped tobacco strips; the increase in heaping thickness will significantly reduce the uniformity of heat and mass transfer of tobacco strips in the process of convection drying. This model can provide a reference for the study of heat and mass transfer in porous media, such as tobacco strips in the heaping state.