Biomass contains up to 14 essential elements that serve as nutrients for plant growth and development, including photosynthesis and enzyme functionalities. These elements in different chemical forms (e.g., minerals) constitute the inorganic fraction of biomass and can cause operational issues in thermal and biochemical biomass conversion technologies. In biomass gasification and pyrolysis processes, for instance, inorganics can cause fouling, tar formation, and corrosion. In catalytic and biochemical processes, inorganics can poison catalysts, alter biochemical pathways, and modify product yields and selectivity. This review provides an overview of the inorganic content in biomass feedstocks, the critical role inorganics play in plant biochemistry, the effect that inorganics have in various thermochemical and biochemical biomass conversion technologies, and different approaches to remove them from biomass. We provide recommendations for future research, focusing on developing technologies to effectively remove inorganics from biomass, using the inorganics to improve soil quality and for alternative applications, and designing biorefineries to convert demineralized biomass obtained from diverse sources.

This research focused on the evaluation of the Fe₂O₃/TiO₂ composite and two industrial wastes, a kaolin (Clay-K) and a blast furnace sludge (BFS), as adsorbents and/or photocatalytic materials to enhance the removal of cyanide from aqueous solutions. Cyanide adsorption tests were conducted in the absence of light. In contrast, cyanide photodegradation tests were conducted under three types of irradiations: visible light, ultraviolet (UV) light, and natural sunlight. For the latter case, two irradiance conditions were evaluated. Cyanide adsorption from aqueous phases was similar for Clay-K and TiO₂/Fe₂O₃ materials, which adsorbed almost twice as much cyanide compared to the BFS sample. The differences observed in cyanide removal were explained in terms of the material’s surface area and chemical composition, and a complexation of cyanide ions with surface metals was suggested as the most feasible adsorption mechanism. The set of cyanide photodegradation experiments promoted, in general, higher cyanide removal from the aqueous solution compared to the adsorption processes. Under the conditions used in this study and when using Clay-K and BFS as promoters, cyanide photodegradation progressively enhanced with the following radiations: visible light < UV light ~ UV+solar ≤ Visible+solar. In the case of the TiO₂/Fe₂O₃ composite, cyanide photodegradation increased in the following order: UV light < visible light < UV+solar ~ Visible+solar. Clearly, solar radiation had a significant effect on promoting cyanide removal. For experiments conducted with natural sunlight, the set with irradiance of 600–800 W/m² exhibited the highest cyanide removal percentage, and the BFS had the best performance among the three tested samples over a period of 2 h. Results showed the benefit of using industrial wastes to remove cyanide from aqueous solutions and illustrates remediation of industrial effluents is potentially feasible within the framework of a circular economy.

ADSORPTION OF CHROMIUM FROM STEEL PLATING WASTEWATER USING BLAST FURNACE DUST

In this work, the removal of cyanide from aqueous solutions was accomplished by using the synergetic effect of activated carbon and an oxidizing agent. A basic-character coconut shell activated carbon (CAC) was used; experiments were conducted in a semi-batch reactor, at 25 °C, initial pH of 11.5, and using cyanide solutions with initial concentration up to 1200 mg/mL. In particular, the beneficial effect of an oxidizing agent such as air, oxygen or ozone on the removal of cyanide by CAC was evaluated. At the optimum operating conditions found in this study, 1200 mg/mL of cyanide were totally decomposed in about 3 h, by using 1 g of CAC and about 2 mgO₃/min. The experimental results were rationalized based on different mechanisms reported in the literature. The findings provide the basis to optimize the removal of cyanide from aqueous solutions in mining or metallurgical effluents by using the synergetic effect of CAC and ozone.