Processing of Al–19·4Si alloy by high intensive electron beam has been carried out, and multiple increase in fatigue life of the material has been revealed. Investigations of structure and surface modified layer destruction of Al–19·4Si alloy subjected to high cycle fatigue tests to fracture have been carried out by methods of scanning electron microscopy. The factors responsible for the increase in fatigue life of Al–19·4Si alloy have been revealed and analysed.
1 September 2015 in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
The regularities of the formation of the structure of silumin irradiated with a high-intensity electron beam in different modes are revealed using optical and scanning electron microscopy. The...
1 January 2016 in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
By methods of optical, scanning and transmission electron microscopy and microhardness measurement the transformation regularities of structure-phase states, defect substructure, fracture surface and...
By methods of scanning and transmission electron diffraction microscopy the analysis of structure-phase states and defect substructure of silumin subjected to high-intensity electron beam irradiation in various regimes and subsequent fatigue loading up to failure was carried out. It is revealed that the sources of fatigue microcracks are silicon plates of micron and submicron size are not soluble in electron beam processing. The possible reasons of the silumin fatigue life increase under electron-beam treatment are discussed.
24 September 2015 in Bulletin of the Russian Academy of Sciences: Physics
The structural-phase states and defect substructure of silumin subjected to high-intensity electron beam irradiation in different modes and subsequent fatigue loading up to failure are analyzed via...
By methods of scanning and transmission electron microscopy the transformation regularities of structure-phase states, defect substructure, fracture surface of rail surface layer up to 10 mm deep in process of long-term operation (passed tonnage of gross weight 1000 mln tons) were revealed. It has been shown that the surface layer ∼20 μm in thickness has a multiphase, submicro- and nanocrystalline structure and it contains micropores and microcracks. The increased density of bend extinction contours at 2 mm depth from the tread contact surface was noted. The analysis of structure morphological constituents and internal stress fields, created by intra- and interphase boundaries after long operation was carried out. It was shown that the maximum amplitude of stress fields was formed on the interphase boundary the globular cementite particle–matrix. The evaluation of stress fields was done.