Li dendrite growth, which causes potential internal short circuit and reduces battery cycle life, is the main hazard to lithium metal batteries. Separators have the potential to suppress dendrite growth by regulating Li+ distribution without increasing battery weight significantly. However, the underlying mechanism is still not fully understood. In this paper, we apply an electrochemical phase-field model to investigate the influences of separator thickness and surface coating on dendrite growth. It is found that dendrite growth under thicker separators is relatively uniform and the average dendrite length is shorter since the ion concentration within thicker separators is more uniform. Moreover, compared to single layer separators, the electrodeposition morphology under particle-coated separators is smoother since the particles can effectively regulate Li ionic flux and homogenize Li deposition. This study provides significant guidance for designing separators that inhibit dendrites effectively.
With the rapid progress of computer technology, computational research exhibits significant advantages in investigating microstructure evolution of material systems. As a computational research method of material dynamics, increasing attention has been paid to the phase-field model because of its avoidance of complicated interface tracking and convenience of dealing with applied fields. Theoretical framework of the phase-field model and three current phase-field models for multicomponent multiphase systems (the Carter, Steinbach, and Chen models) are introduced and reviewed in terms of interpretation of phase-field variables, way of coupling thermodynamic database, way of constructing the free energy density, and evolution equations. This review only focuses on the application of the phase-field model in electrochemical energy storage materials, and introduces its existing phase-field simulation results, which demonstrates that the phase-field model has tremendous potential in describing the microstructure evolution (anisotropic transport and phase separation, elastic and plastic deformation, crack propagation and fracture, dendrite growth, etc) and improving the performance of electrochemical energy storage materials. Finally, from two aspects of improving phase-field theory and extending application, future development trend and problems to be solved of phase-field simulations in electrochemical energy storage materials are discussed and looked ahead.
24 February 2023 in International Journal of Crashworthiness
Thin-walled structures are widely used in the design of energy absorbers due to their excellent performance on crashworthiness. Various designs and optimisations on the internal and external structures, materials, and fillers of thin-walled structures are intensively studied. However, traditional thin-walled structures often exhibit excessive initial peak crushing force (IPCF) and large fluctuations in the force-displacement curve under axial load. This paper optimises the traditional thin-walled structure from the perspective of biological structure and proposes a new tapered structure that mimics the shape of a conch shell, named ‘Conch tube’ (CT), which aims to stabilise the crushing process and improve energy absorption capacity. Numerical simulations are used to study the effects of thread pitch and groove width on the deformation mode and performance on crashworthiness of the CT. The results show that the deformation mode of the CTs can be changed from the spiral groove trigger mode to the progressive mode by controlling the thread pitch and groove width. Therefore, by controlling the pitch and groove width, the CT can obtain a lower IPCF. Finally, multi-objective optimisation based on active learning is used to obtain the best CT structure. Compared with the traditional conical tube, the CT has an excellent crashworthiness performance. The effectiveness of the spiral groove structure in enhancing energy absorption and reducing IPCF is confirmed.