This paper presents an overview and formalization of the Functional Mock-up Interface (FMI) 3.0. The formalization captures the new FMI 3.0 standard and is intended to be used as an introduction for conceptualizing the use of clocks in the FMI standard to support the simulation of event-based cyber-physical systems. The FMI 3.0 standard supports two kinds of clock-based simulations: Synchronous Clocked Simulation to ensure predictable systems scheduling with multiple simultaneous events and scheduled execution to facilitate real-time simulations comprising multiple black-box models by allowing fine-grained control over the computation time of submodels. The formalization is a basis for developing tools for orchestrating, verifying and validating the composition of multiple FMUs. The formalization is provided as an accessible VDM-SL specification.
22 December 2023 in Swedish Aerospace Conference, FT2025
The FMI standard - just like any other standard - faces the challenge of balancing generality with enabling specific use cases. Including every domain or use-case specific extension in the core standard would significantly increase its length, making it unreadable and unimplementable. To allow for extensions of the core standard for specific use cases, the Modelica Association developed the concept of layered standards, first in the SSP standard and later in FMI. This paper presents the concept of layered standards and describes the layered standards currently under development by the FMI Project: XCP support of FMUs, network communication, and structured variables and regular maps in FMI 3.0.
This paper introduces the FMI 3.0 Layered Standard forNetwork Communication (FMI-LS-BUS), an extension of theFunctional Mock-up Interface 3.0 (FMI 3.0) standarddesigned to address interoperability challenges insimulating distributed, networked systems, particularly inautomotive applications. By leveraging FMI 3.0 featuressuch as clocks, clocked variables, and hierarchicalterminals,the standard defines two complementary abstraction layers:Physical Signal Abstraction (High-Cut): Representingphysical signal values as clocked variables.Network Abstraction (Low-Cut): Emulates hardware-level busprotocols (e.g., CAN, Ethernet) using FMI 3.0’s clockedbinary variables.Aligning with the V-model development process, wedemonstrate how these layers address distinct challenges indifferent design phases: High-Cut supports require-ments engineering and functional testing by simplifyingsignal exchange during Virtual Electronic Control Unit(vECU) integration. Low-Cut enables later phases of thedesign validation by replicating network timing andprotocol specific properties, such as error handling.The standard’s applicability currently focuses onautomotive use cases (e.g., CAN, CAN FD, CAN XL, Ethernet,FlexRay, LIN) but can be extended to industrial au-tomation and IoT, facilitated by its domain-agnosticstructure.
21 October 2015 in Proceedings in Applied Mathematics and Mechanics