Lithium metal, with ultrahigh theoretical specific capacity, is considered as an ideal anode material for the lithium‐ion batteries. However, its practical application is severely plagued by the uncontrolled formation of dendritic Li. Here, a cation‐loaded porous Mg 2+ ‐Zeolite layer is proposed to enable the dendrite‐free deposition on the surface of Li metal anode. The skeleton channels of zeolite provide the low coordinated Li + ‐solvation groups, leading to the faster desolvation process at the interface. Meanwhile, anions‐involved solvation sheath induces a stable, inorganic‐rich SEI, contributing to the uniform Li + flux through the interface. Furthermore, the co‐deposition of sustained release Mg 2+ realizes a new faster migration pathway, which proactively facilitates the uniform diffusion of Li on the lithium substrate. The synergistic modulation of these kinetic processes facilitates the homogeneous Li plating/stripping behavior. Based on this synergistic mechanism, the high‐efficiency deposition with cyclic longevity exceeding 2100 h is observed in the symmetric Li/Li cell with Mg 2+ ‐Zeolite modified anode at 1 mA cm −2 . The pouch cell matched with LiFePO 4 cathode fulfills a capacity retention of 88.4% after 100 cycles at a severe current density of 1 C charge/discharge. This synergistic protective mechanism can give new guidance for realizing the safe and high‐performance Li metal batteries.
Intercalation-type metal oxides are promising active anode materials for the fabrication of safer rechargeable lithium-ion batteries, as they are capable of minimizing or even eliminating Li plating at low voltages. Due to the excellent cycle performance, high specific capacity and appropriate working potential, TiNb2O7 (TNO) is considered to be the candidate of anode materials. Despite a lot of beneficial characteristics, the slow electrochemical kinetics of the TNO-based anodes limits their wide use. In this paper, TiNb2O7@C was prepared by using the self-polymerization coating characteristics of dopamine to enhance the rate-performance and cycling stability. The TNO@C-2 particles present ideal rate performance with the discharge capacity of 295.6 mA h g−1 at 0.1 C. Moreover, the TNO@C-2 anode materials exhibit initial discharge capacity of 177.4 mA h g−1, providing 91% of capacity retention after 400 cycles at 10 C. The outstanding electrochemical performance can be contributed to the carbon layer, which builds fast lithium ion paths, enhancing the electrical conductivity of TNO. All these results confirm that TNO@C is a valid methodology to enhance rate-performance and cycling stability and is a new way to provide reliable and quickly rechargeable energy storage resources.
Intrinsically low ion conductivity and unstable cathode electrolyte interface are two important factors affecting the performances of LiCoPO4 cathode material. Herein, a series of LiCo1-1.5xYxPO4@C (x = 0, 0.01, 0.02, 0.03) cathode material is synthesized by a one-step method. The influence of Y substitution amount is optimized and discussed. The structure and morphology of LiCo1-1.5xYxPO4@C cathode material does not lead to obvious changes with Y substitution. However, the Li/Co antisite defect is minimized and the ionic and electronic conductivities of LiCo1-1.5xYxPO4@C cathode material are enhanced by Y substitution. The LiCo0.97Y0.02PO4@C cathode delivers a discharge capacity of 148 mAh g−1 at 0.1 C and 96 mAh g−1 at 1 C, with a capacity retention of 75% after 80 cycles at 0.1 C. Its good electrochemical performances are attributed to the following factors. (1) The uniform 5 nm carbon layer stabilizes the interface and suppresses the side reactions with the electrolyte. (2) With Y substitution, the Li/Co antisite defect is decreased and the electronic and ionic conductivity are also improved. In conclusion, our work reveals the effects of aliovalent substitution and carbon coating in LiCo1-1.5xYxPO4@C electrodes to improve their electrochemical performances, and provides a method for the further development of high voltage cathode material for high-energy lithium-ion batteries.