This study designed two levels of quantitative fertilizer distribution to investigate precision fertilization applications in orchards in South Xinjiang, China, which have vast rows and narrow plant spaces. The machine comprised a base frame, a ditching device, a fertilizing apparatus and an earth-covering device. The design parameters of the flow stabilization screw, conveyor screw and single-ring fertilizer quantity were summarised using theoretical analysis. The single-ring fertilizer quantity of the conveyor screw was verified via an experiment by combining EDEM software. Three-factor and three-level Box–Behnken tests were conducted using the spiral rotation speed of the conveyor, advancing of the speed and the opening degree of fertilizer outlet as the test factors and using the coefficient of variation (CV) of uniformity as the test index—thus obtaining the optimal working parameters. The simulation test results revealed that the single-ring fertilizer quantity of the fertilizing apparatus was 145.6 g, fulfilling the design requirements. The prototype testing results showed that the CV of uniformity was 6.521% when the spiral rotation speed of the conveyor, the opening degree of the fertilizer outlet and the advancing speed were 66 RPM, 42% and 2.7 km/h—thus meeting the needs of precision fertilization operations. The two designed levels of the quantitative fertilizer distributors were applied to fertilization processes in orchards with wide-row spaces and narrow plant spaces in South Xinjiang, China and were able to effectively carry out the precision fertilization applications. These data could also provide references for the optimization of spiral quantitative fertilizer distributors.

A multi-duct orchard sprayer is designed in this paper to address the problem of low droplet coverage during plant protection in walnut orchards in South Xinjiang, China. This spray comprises a base frame, a pesticide tank, an air delivery system, a copying base frame and a drive system. Effects of the sprayer structure on the flow field were simulated using computational fluid dynamics. Operation parameters were optimised using the response surface analysis and validated using a field test. The results demonstrated that five jet tubes in the simulation design could fulfil the design requirements of GB/T 32250.3-2022. The upper, middle and lower droplet coverages were 74.92%, 90.01% and 69.9%, respectively, when the sprayer’s advancing speed, the angle of jet tubes and the nozzle diameter were 0.53 m/s, 70.27° and 0.81 mm, respectively. The machine can effectively enhance the spraying efficiency and droplet coverage of each canopy during plant protection operations in the new walnut orchards of South Xinjiang, China, and provide references for designing and optimising fruit tree spraying machinery.