Molten salt has been regarded as a versatile and environmental-friendly method for the material preparation and waste destruction. In this work, molten FeCl3 was utilized for the generation of magnetic biochar (MBC) derived from simultaneous activation and magnetization of biomass. The sample characterization indicated that MBC had a rough surface with BET surface area of 404 m2/g and total pore volume of 0.35cm3/g. Highly dispersed Fe3O4 and nitrogen could be deposited on the surface, leading to an excellent magnetization property. The MBC exhibited a great 2,4-Dichlorophenol (2.4-DCP) and atrazine removal performance in solution with the maximum adsorption capacity achieved 298.12 mg/g and 102.17 mg/g. Kinetics results demonstrated that MBC adsorption met the Pseudo-first-order model better. Molten NaOH-Na2CO3 was provided for the re-activation of exhausted MBC. 2,4-DCP was firstly desorbed from the MBC and subsequently destructed by the active species in the melt medium. Chlorine can be captured in the molten alkaline medium from the XRD pattern of residues.The MBC could be easily recovered with a yield of 98.2% and fixed carbon content of 61.0% after the molten salt regeneration process. With no 2,4-DCP detected, 65.5% and 31.69% of initial Cl was found in washing water and residues with the molten NaOH-Na2CO3, respectively. After 4 cycles of regeneration and adsorption, 60.55%-72.22% of initial adsorption capacity can be kept. This preparation and regeneration method can be an effective way to reduce the risk of secondary pollution of chlorinated organic compounds during adsorbent regeneration. Implications: Molten salt (MS) is a salt or multiple salts with a low melting point, and has been applied in many sectors and is regarded as a crucial role in terms of energy, environmental, and resource sustainability. In our paper, magnetic biochar was prepared by one-step activation and magnetization of fir dust using molten FeCl3∙6H2O. Meanwhile, a regeneration method using molten alkaline salt was provided. Magnetic biochar generated in our study performed well in the 2,4-dichlorophenol and atrazine adsorption. After four cycles of regeneration and adsorption, 72.2% of initial 2,4-DCP adsorption capacity can be kept.
An unprecedented Household Solid Waste (HSW) separation program was launched in 46 cities and some pilot rural areas in China in 2019. This study examines the antecedents of waste separation behavior using the extended theory of planned behavior (TPB) to identify beliefs that are useful targets for interventions, and compares the urban-rural differences. Based on interviews with rural and urban residents, we identified residents’ beliefs influencing waste separation behaviors, including four behavioral, seven normative, and eight control beliefs. Then, we tested the conceptual model with a two-stage questionnaire survey using a sample of 604 residents from urban and rural areas. Evidence from structural equation modeling supports the extended TPB in that it predicts waste separation intention and behavior on the whole. Moral norm and self-identity were found to independently predict intention and may prove a useful addition to the TPB; however, the path from attitude to intention is not supported in both urban and rural models. Moreover, the specific difference of belief between urban and rural residents was examined. The behavioral beliefs associated to money, including earning, free waste bin or bag, and fine, are significant only in the rural group. The normative beliefs of family, Chinese Communist Party (CCP) members, and government can affect residents’ subjective norm in both urban and rural, while the beliefs of relatives, friends, and neighbors are significant only in the rural group. Implications for managers of operating waste separation programs were discussed. Further investigation into the potential of the model to intervene in waste separation behavior is required.
Moisture content is a very important parameter for municipal solid waste (MSW) treatment technology selection and design. However, the moisture content of MSW collected from different urban areas is influenced by its physical composition in these areas. The aim of this study was to analyze the key components of MSW for predicting moisture content in different functional areas via the development of an artificial neural network (ANN) model. The dataset used in this study was collected in Shanghai from 2007 to 2019. Considering the influence of functional areas, the model obtained the performance with MAE of 2.67, RMSE of 3.29, and R2 of 0.83, and an eight-fold cross validation showed acceptable results. The inter-quartile range (IQR) and isolation forest were compared to detect and remove outliers. In descending order, the moisture content was ranked as commercial/residential > office > cleaning areas. Based on a parameter exclusion method, kitchen, rubber, and plastic wastes show the greatest influence on moisture content in residential and commercial areas. In cleaning and office areas, paper, wood and bamboo waste products were the most important components. The determination of key components in different functional areas is of benefit for reducing the workload of moisture content estimation.