Slots or defects integrated on the ground plane of microwave planar circuits are referred to as Defected Ground Structure. DGS is adopted as an emerging technique for improving the various parameters of microwave circuits, that is, narrow bandwidth, cross-polarization, low gain, and so forth. This paper presents an introduction and evolution of DGS and how DGS is different from former technologies: PBG and EBG. A basic concept behind the DGS technology and several theoretical techniques for analysing the Defected Ground Structure are discussed. Several applications of DGS in the field of filters, planar waveguides, amplifiers, and antennas are presented.
In this paper, a wideband circularly polarized (CP) textile multiple-input-multiple-output (MIMO) antenna is presented for wearable applications. The designed MIMO antenna consists of two sickle-shaped resonating elements and a common ground plane. Each antenna element is excited by a microstrip line feed, and an inverted L-shaped strip is introduced in the ground plane to support circular polarization. The antenna covers impedance bandwidth ( $\text{S}_{11}\le -10$ dB) of 3.6–13 GHz and 3-dB axial ratio bandwidth (ARBW) of 5.2–7.1 GHz. The proposed textile MIMO antenna exhibits envelope correlation coefficient (ECC) < 0.02, diversity gain (DG) $>9.96$ , total active reflective coefficient (TARC) $ < -10$ dB, channel capacity loss (CCL) < 0.2 b/s/Hz, and mean effective gain (MEG) ratio within ±0.5 dB. The antenna offers dual-sense circular polarization and high isolation (>18) between the resonating elements. Also, the proposed antenna is investigated for different human body situations, and its specific absorption rate (SAR) for human tissues specimen is studied. The overall size of the proposed CP textile MIMO antenna is $32.5 \times 42 \times 1$ mm 3 . The designed MIMO antenna could be useful for wearable applications due to its textile layers, reasonable on-body performance, and compact size.
A four‐port MIMO antenna design focused on the sub‐6 GHz fifth generation wireless communication application is presented. The design does not need any other decoupling structure for achieving isolation between multiple ports. A combination of four single wideband antenna units results in the formation of a circular‐shaped metallic disc in the ground plane of the proposed antenna. This disc acts as a pool of current with 180° phase difference leading to isolation between various ports. Diversity performance of the antenna is shown with the help of an envelope correlation coefficient using both S‐parameter and far‐field data. The radiation pattern of the proposed antenna has four lobes in four quadrants for proper reception of signals from different directions. A prototype of the designed antenna is fabricated and measured successfully.
1 February 2020 in AEU - International Journal of Electronics and Communications
In this work, two configurations (Config.-A and Config.-B) of planar four-port dual circularly-polarized (CP) multiple-input-multiple-output (MIMO) antenna are proposed for sub-6 GHz (3.4–3.8 GHz) applications. The MIMO antennas are designed on the FR-4 substrate with size of 60×60×1.6 mm3. Each radiating element (unit cell) of the MIMO antenna is comprised of a microstrip feed line and an open slot ground plane integrated with two rectangular arms for realizing circular polarization. An I-shaped metallic strip is used in the proposed four-port MIMO Config.-A and Config.-B antennas for obtaining common voltage level in the ground plane. Both MIMO antenna configurations exhibit good impedance matching in the band of interest. In the MIMO Config.-A antenna, all ports provide the same CP band, while in the Config.-B antenna the ports-1/-2 and -3/-4 radiate at different CP bands. The proposed MIMO Config.-A and Config.-B antennas support both types of polarization (left-hand circular polarization (LHCP) and right-hand circular polarization (RHCP)). With the Config.-B antenna, the maximum 3-dB axial-ratio (AR) beamwidths of 118.9° and 92.7° are obtained at 3.536 GHz in the xz- and yz-planes, respectively. Furthermore, the I-shaped strip helps in improving 3-dB AR beamwidth in the MIMO Config.-B antenna. Inter-element isolation greater than 19 dB and envelope correlation coefficient (ECC) less than 0.12 (far-field) are achieved between the ports of the fabricated MIMO antenna prototype.