Changzheng Chen

Dr. Changzheng Chen


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2023 in Sensors
Verified
Journal Article
Open access
PDF file
YLYing Lu
Ying Lu
CCChangzheng Chen
Changzheng Chen
JZJunqing Zhu
Junqing Zhu
With the development of space telescopes towards high-resolution and intelligent imaging, the scale and complexity of the focal plane components of large-aperture, off-axis, three-mirror anastigmatic (TMA) optical systems are increasing. Traditional focal plane focusing technology reduces the system reliability and increases the scale and complexity. This paper proposes a three-degrees-of-freedom focusing system based on a folding mirror reflector, with a piezoelectric ceramic actuator as the driver. An environment-resistant flexible support was designed for the piezoelectric ceramic actuator through an integrated optimization analysis. The fundamental frequency of the large-aspect-ratio rectangular folding mirror reflector focusing mechanism was around 121.5 Hz. After testing, it was found to meet the requirements of the space mechanics environment. This system shows promise for application to other optical systems as an open-shelf product in the future.

6 August 2024 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
YPYueyang Peng
Yueyang Peng
CCChangzheng Chen
Changzheng Chen
GBGuoling Bi
Guoling Bi
BSBin Sun
Bin Sun
WSWei Sha
Wei Sha
To enhance the efficiency and accuracy of the on-orbit focusing of earth observation satellites, this study proposes a method based on multi-star imaging. Specifically, the proposed method quantitatively evaluates the defocusing state of a space optical camera and estimates the optimal position of its photosensitive surface of detector (PSD). An experimental platform is established to capture star images, and the performance of the algorithm is evaluated based on indexes such as focusing accuracy and robustness. Moreover, the algorithm is compared to the single-star-imaging-based algorithm. Consequently, the effectiveness of the proposed algorithm is validated. Next, to demonstrate the application of the algorithm to real-time on-orbit focusing, field programmable gate arrays are used. Specifically, the performance of the multi-star-imaging-based algorithm in practical engineering applications is verified using space camera on-orbit star imaging data, and its performance is compared with that of the single-star-imaging-based algorithm. In ground tests, the maximum focusing error of the algorithm based on multi-star-imaging is 0.00075 mm. During robustness tests involving variations in the focusing step, star centroid distribution uniformity, and image noise, its maximum error is 0.0021 mm. Further, when the signal-to-noise ratio of the image exceeds 20 dB, the focusing accuracy and goodness of fit of the algorithm based on multi-star-imaging are better compared to those of the single-star-imaging-based algorithm. The prototype verification results present an error of 1.623% relative to the baseline data. Using on-orbit star imaging data, the error between the optimal PSD position and the actual ideal PSD position is calculated to be 0.01528 mm. These results indicate that the auto-focusing algorithm proposed in this paper demonstrates high focusing accuracy and robustness against external factors such as focusing step changes, centroid distribution uniformity variations, image noise differences, and star brightness changes. Moreover, it outperforms the single-star-imaging-based algorithm. Hardware deployment verification reveals that the computing resources and calculation accuracy of the algorithm within the XC7K325T environment satisfy operational requirements. Thus, the proposed algorithm can be employed for the on-orbit focusing tasks of space cameras, satisfying image quality requirements with enhanced focusing accuracies.

15 August 2023 in Machines
Verified
Journal Article
Open access
PDF file
YWYuzhe Wang
Yuzhe Wang
XSXiaodong Sui
Xiaodong Sui
TZTianqing Zhang
Tianqing Zhang
TNTing Nie
Ting Nie
CCChangzheng Chen
Changzheng Chen
With the rapid development of science and technology, high-resolution remote sensing cameras are now widely used in various fields. At the beginning of camera attitude adjustment, residual torque due to state changes can affect platform stability and lead to the degradation of imaging quality. This paper analyzes the effect of external disturbances on the attitude of the satellite platform according to the Newton–Euler method. In order to effectively realize the self-balancing of the torque of the remote sensing camera rotary table and eliminate the influence of the residual torque on the stability of the satellite platform, this study designs a torque balancing mechanism for the two-axis rotary table of a remote sensing camera based on the first-generation balancing mechanism. Firstly, this paper provides a detailed analysis of the mechanism equilibrium principle from the theoretical point of view based on the theories related to momentum moment theorem and momentum moment conservation law. Then, the dynamics model of the torque balancing mechanism is built, and the dynamics simulation analysis is carried out in this paper. The analysis results show that compared with the first-generation torque balancing mechanism, the residual torque of the second-generation torque balancing mechanism is reduced by 66.67%, the peak value of the residual torque is reduced by 57.55%, the mass of the balancing flywheel is reduced by 74.14%, and the torque balancing time is reduced by 42.86%. Finally, two torque balancing mechanism prototypes were fabricated at equal scale for test verification in this paper. The test results show that compared with the first-generation torque balancing mechanism, the residual torque of the second-generation test prototype is reduced by 40%, the peak of the residual torque is reduced by 25%, the mass of the balancing flywheel is reduced by 60.34%, and the torque balancing time is reduced by 51.06%. There are some differences between the simulation analysis and the experimental results, but the overall trend is consistent with the theory. Through theoretical derivation, simulation analysis and experimental verification, the correctness and feasibility of the proposed second-generation torque balancing mechanism are fully confirmed, which has certain reference significance and engineering application value for the torque self-balancing scheme of rotary tables.

10 March 2026 in Machines
Verified
Journal Article
Open access
PDF file
Kuncheng FengKuncheng Feng
Kuncheng Feng
HHHasiaoqier Han
Hasiaoqier Han
CCChangzheng Chen
Changzheng Chen
JLJiaxin Li
Jiaxin Li
HHHaifei Hu
Haifei Hu
ZXZhenbang Xu
Zhenbang Xu
In the field of parallel robots, traditional rigid joints compromise motion accuracy owing to inherent friction and backlash, thus driving the demand for high-performance compliant joints. This paper proposes a parametric design method for a two-axis compliant joint that employs flexure leaf springs (FLSs) as rigid joint alternatives. The joint configuration consists of four FLSs arranged in a revolute–revolute (RR) layout. Based on Euler–Bernoulli beam theory and the deformation superposition principle, linear analytical models for the compliance and stress characteristics of both the flexure leaf spring (FLS) and the compliant joint are derived. These models are validated through finite element analysis (FEA) and rotational motion experiments. The results indicate that the relative errors between the analytical model (AM) and finite element model (FEM) are below 8%, while the relative errors between the AM and experimental data are within 12%. The proposed parametric design method enables rapid preliminary design and the performance evaluation of the two-axis compliant joint, which is intended as a rotational joint for six degrees of freedom (6-DOF) parallel robots with typical applications in high-precision optical alignment.

3 February 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Kuncheng FengKuncheng Feng
Kuncheng Feng
HHHasiaoqier Han
Hasiaoqier Han
CCChangzheng Chen
Changzheng Chen
JLJiaxin Li
Jiaxin Li
HHHaifei Hu
Haifei Hu
ZXZhenbang Xu
Zhenbang Xu
In the field of parallel robots, traditional rigid joints compromise motion accuracy owing to inherent friction and backlash, thus driving the demand for high-performance com-pliant joints. This paper proposes a parametric design method for a two-axis compliant joint that employs flexure leaf springs (FLSs) as rigid joint alternatives. The joint con-figuration consists of four FLSs arranged in a revolute-revolute (RR) layout. Based on Euler–Bernoulli beam theory and the deformation superposition principle, linear ana-lytical models for the compliance and stress characteristics of both the flexure leaf spring (FLS) and the compliant joint are derived. These models are validated through finite element analysis (FEA) and rotational motion experiments. The results indicate that the relative errors between the analytical model (AM) and finite element model (FEM) are below 8%, while the relative errors between the AM and experimental data are within 12%. The proposed parametric design method enables rapid preliminary design and performance evaluation of compliant joints, which highlights its potential for practical engineering application.

26 February 2026 in Sensors
Verified
Journal Article
Open access
PDF file
YHYukun He
Yukun He
HZHongbo Zhao
Hongbo Zhao
LPLanxin Peng
Lanxin Peng
XSXiaodong Sui
Xiaodong Sui
CCChangzheng Chen
Changzheng Chen
YPYueyang Peng
Yueyang Peng
To better meet the wavefront measurement requirements for large-aperture segmented mirrors after in-orbit deployment, this paper designs a measurement system based on an optical camera and targets. This system utilizes photogrammetry principles to measure target positions, fit the wavefront of the segmented mirror, and form a closed-loop control with the calibration mechanism. Based on the wavefront measurement range and accuracy requirements during the coarse calibration phase of the segmented mirror, the optical system was first designed. The measurement camera features a 16° × 12° rectangular field of view with a 100 mm focal length, achieving near-diffraction-limited imaging quality. The structural fundamental frequency of the measurement camera exceeds 400 Hz. Under a 4 °C temperature rise environment, the surface error of the optical lens remains better than 1/80λ. Based on error theory, a quantitative analysis of error sources and their impact on target position measurement accuracy was conducted, yielding theoretical measurement errors of ±0.0853 mm in the Z-direction and ±0.1525 mm in the X-direction. Through focal length calibration and imaging tests of the prototype, the measurement camera achieved a modulation transfer function greater than 0.11 with excellent imaging quality. With a focal length of 101.356 mm and a measurement range exceeding ±4 mm, it meets design requirements. Finite element simulation and Monte Carlo methods analyzed wavefront fitting accuracy under different operating conditions, yielding peak-to-valley values of 0.397 mm and root mean square values of 0.073 mm. The wavefront measurement system designed in this paper meets the structural rigidity and temperature adaptability requirements for in-orbit measurement systems. The prototype’s field of view satisfies the wavefront measurement range requirements, the camera’s focal length meets design specifications with good imaging quality, and the wavefront measurement deviation meets the accuracy requirements for the coarse calibration phase. Compared to current wavefront measurement systems, the proposed system significantly expands the measurement range, offering a novel wavefront measurement method for coarse calibration of tiled mirrors.