In this paper, we report a high power single frequency 1030 nm fiber laser with near-diffraction-limited beam quality based on a polarization-maintaining tapered Yb-doped fiber (T-YDF). The T-YDF has advantages of effectively suppressing stimulated Brillouin scattering (SBS) while maintaining good beam quality. As a result, a record output power of 379 W single frequency, linearly polarized, nearly single-mode fiber amplifier operating at 1030 nm is demonstrated. The polarization extinction ratio is as high as 16.3 dB, and the M² is measured to be 1.12. Further, the dependence of the thermal-induced mode instability (TMI) threshold on the polarization state of an input signal laser is investigated for the first time. By changing the polarization state of the injected seed laser, the output power can increase to 550 W while the beam quality can be maintained well (M²=1.47). The slope efficiency of the whole amplifier is about 80%. No sign of SBS appears even at the highest output power and the further brightness scaling of both situations is limited by the TMI effect. To the best of our knowledge, this result is the highest output power of all-fiberized single frequency fiber amplifiers.

The high-power narrow-linewidth fiber laser has become the most widely used high-power laser source nowadays. Further breakthroughs of the output power depend on comprehensive optimization of stimulated Brillouin scattering (SBS), stimulated Raman scattering (SRS) and transverse mode instability (TMI). In this work, we aim to further surpass the power record of all-fiberized and narrow-linewidth fiber amplifiers with near-diffraction-limited (NDL) beam quality. SBS is suppressed by white-noise-signal modulation of a single-frequency seed. In particular, the refractive index of the large-mode-area active fiber in the main amplifier is controlled and fabricated, which could simultaneously increase the effective mode field area of the fundamental mode and the loss coefficient of higher-order modes for balancing SRS and TMI. Subsequent experimental measurements demonstrate a 7.03 kW narrow-linewidth fiber laser with a signal-to-noise ratio of 31.4 dB and beam quality factors of M_x² = 1.26, M_y² = 1.25. To the best of our knowledge, this is the highest reported power with NDL beam quality based on a directly laser-diode-pumped and all-fiberized format, especially with narrow-linewidth spectral emission.

In this work, an all-fiberized and narrow-linewidth fiber amplifier with record output power and near-diffraction-limited beam quality is presented. Up to 6.12 kW fiber laser with the conversion efficiency of approximately 78.8% is achieved through the fiber amplifier based on a conventional step-index active fiber. At the maximum output power, the 3 dB spectral linewidth is approximately 0.86 nm and the beam quality factor is M _x ² = 1.43, M _y ² = 1.36. We have also measured and compared the output properties of the fiber amplifier employing different pumping schemes. Notably, the practical power limit of the fiber amplifier could be estimated through the maximum output powers of the fiber amplifier employing unidirectional pumping schemes. Overall, this work could provide a good reference for the optimal design and potential exploration of high-power narrow-linewidth fiber laser systems.

In this work, we conduct a detailed experimental study on the impact of signal bandwidth on the TMI threshold of fiber amplifiers. Both the filtered superfluorescent fiber sources and the phase-modulated single-frequency lasers are employed to construct seed lasers with different 3 dB spectral linewidths ranging from 0.19 nm to 7.97 nm. The TMI threshold of the fiber amplifier employing those seed lasers are estimated through the intensity evolution of the signal laser, and different criteria have been utilized to characterize the spectral linewidth of the seed lasers. Notably, the experimental results reveal that the TMI threshold of fiber amplifiers grows, keeps constant, and further grows as a function of spectral linewidth of seed lasers. Our experimental results could provide a well reference to understand the mechanism of the TMI effect and optimize the TMI effect in high-power fiber amplifiers.

In this work, we analyze the effects of the background spectral noise in phase-modulated single-frequency seed lasers on the spectral purity of high-power narrow-linewidth fiber amplifiers. Through demonstrating the spectral evolution of the phase-modulated single-frequency part and the background spectral noise in a narrow-linewidth fiber amplifier, the mechanism for the spectral wing broadening effect is clarified and design strategies to maintain high spectral purity are given. Specifically, the background spectral noise in phase-modulated single-frequency seed lasers could lead to obvious spectral wing broadening and degeneration of spectral purity in narrow-linewidth fiber amplifiers through the four-wave-mixing effect. Notably, the spectral wing broadening effect could be suppressed by filtering out the background spectral noise in the seed laser or applying a counter-pumped configuration in the fiber amplifier. We have also conducted contrast experiments, which have verified the validity of the theoretical model and the design strategies for high-spectral-purity operation.

By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first, to the best of our knowledge, demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably, two temporally stable, phase-modulated single-frequency lasers operating at 1064 nm and 1120 nm, respectively, were applied in the fiber amplifier, to simultaneously alleviate the spectral broadening of the 1120 nm signal laser and suppress the stimulated Brillouin scattering effect. An over 1 kW narrow-linewidth 1120 nm signal laser was obtained with slope efficiency of ∼ 77 % and beam quality of M x 2 ∼ 1.25 , M y 2 ∼ 1.17 . The amplified spontaneous emission (ASE) noise in the fiber amplifier was effectively suppressed by incorporating an ASE-filtering system between the seed laser and the main amplifier. Furthermore, the experimental results demonstrate that the spectral linewidth broadening effect is tightly related to the injected power ratios between the two seed lasers. Overall, this setup could provide a reference on obtaining and optimizing high-power narrow-linewidth fiber lasers operating in the long wavelength extreme of the Yb gain spectrum.