Producing high-ductility cementitious composites (HDCC) increased in parallel with concrete demand in China recently. However, the high cost of manufacturing cementitious composites (HDCC) persists. To reduce the cost of HDCC, steel fibers, polyvinyl alcohol (PVA), and river sand were used to produce HDCC concrete in the present study. A total fiber content of 2% was formed with five different proportions of PVA fiber and steel fiber. Within the scope of the experimental studies, mechanical (workability, compressive strength, tensile, and bending properties), and microstructural (scanning electron microscopy) tests were carried out to investigate the properties of the hybrid fiber-reinforced composites. The results showed that the fluidity of HDCC increased with increasing steel fiber substitution. The compressive strength of the mixture containing 0.5% steel fiber and 1.5% PVA fiber exhibited a better compressive strength of 31.3 MPa. The tensile performance of the mixture was improved due to the incorporation of steel fiber. The initial cracking strength was about 2.32 MPa, 25.4% higher than that of the reference group, and the ultimate tensile strength was 3.36–3.56 MPa. However, reducing the content of PVA fiber impacts the flexural rigidity of the matrix.
20 December 2024 in Construction and Building Materials
Abundant tuff mineral resources offer a promising solution to the shortage of fly ash (FA) and silica fume (SF) resources as emerging supplementary cementitious materials. However, a lack of clarity on its hydration mechanism has hindered its practical engineering application. In this study, high SiO2-content tuff powder (TP) was examined to assess the mechanical and workability performance of mortar specimens with varying particle sizes of the TP as complete replacements for FA or SF. Microscopic analysis techniques, including X-ray diffraction (XRD), differential thermal analysis (DTG), and energy-dispersive X-ray spectroscopy (EDS), were employed to elucidate the hydration mechanism of the TP and its feasibility as a substitute for SF or FA. Results indicated that TP primarily functions as nuclei and filler, promoting cement hydration, with smaller particle sizes amplifying the hydration ability and increasing Ca(OH)2 and C-S-H gel content. The specimens with TP (median particle size 7.58 μm) demonstrated 9.2% and 29.9% higher flexural and compressive strengths at 28 days, respectively, compared to the FA specimens of equal mass. However, fluidity decreased by 23.1% accordingly. Due to TP’s smaller specific surface area compared to SF, the TP specimens exhibited higher fluidity but with decreased strength relative to the SF specimens. Overall, TP shows potential as a replacement for FA with additional measures to ensure workability.
This paper aims to establish an explicit crack bridging model that can link engineered cementitious composites (ECC) behavior from single fiber to single crack scale, which is great of designing ECC featuring pseudo tensile strain hardening and multiple cracks expanding by tailoring microstructure and materials selection. In this study, fiber bridging stress was divided into three parts including fiber bridging stress with no rupture, fiber debonding fracture stress, and fiber pullout fracture stress. Subsequently, the fundamental crack bridging model was emerged when fiber bridging stress with no rupture subtracted from the fiber rupture stress in debonding and pullout stage. Moreover, two-way pullout and Cook-Gordon effect were also considered to establish the complete model. It was found that the two-way pullout situation of polyvinyl alcohol (PVA) fiber has a significant influence on the crack opening width due to its slip hardening property, while the Cook-Gordon effect presents a faint crack width increment for PVA-ECC. However, the Cook-Gordon effect makes a significant contribution to the crack opening width of the composite produced by polyethylene (PE). This building intelligible model presents a better prediction for ECC through the comparison of experimental data or real average crack width in previous models, thus confirming the validity of this model.
This study aims to explore the feasibility of utilizing high-titanium slag sand (HTSS) as a sustainable alternative to quartz sand in ultra-high-performance concrete (UHPC). The results indicated that incorporating HTSS accelerated cement hydration, enhancing 7-d and 28-d compressive strengths by up to 42.1% and 33.1%, respectively. Notably, at a 100% replacement ratio, the mixture exhibits distinct strain-hardening behavior with uniaxial tensile strength exceeding 6 MPa. Concurrently, autogenous shrinkage is reduced by 32% at 5 h and 68% at 7 d, while CO2 emissions and energy consumption are lowered by 53 kg/m3 and 826 kJ/m3, respectively. Despite its rough and porous morphology, HTSS only marginally affects rheological properties. These findings provide theoretical insights into the development of low-carbon, low-shrinkage UHPC through the strategic valorization of industrial solid waste.