A system based on digital holographic interferometry for the measurement of vibrations is presented. A high-power continuous laser $\left(10\text{\hspace{0.17em} W}\right)$ and a high-speed CCD camera are used. Hundreds of holograms of an object that has been subjected to dynamic deformation are recorded. The acquisition speed and the time of exposure of the detector are determined by the vibration frequency. Two methods are presented for triggering the camera in order to acquire at a given phase of the vibration. The phase of the wavefront is calculated from the recorded holograms by use of a two-dimensional digital Fourier-transform method. The deformation of the object is obtained from the phase. By combination of the deformations recorded at different times it is possible to reconstruct the vibration of the object.

An optical system based on short-coherence digital holography suitable for three-dimensional (3D) microscopic investigations is described. The light source is a short-coherence laser, and the holograms are recorded on a CCD sensor. The interference (hologram) occurs only when the path lengths of the reference and the object beam are matched within the coherence length of the laser. The image of the part of the sample that matches the reference beam is reconstructed by numerical evaluation of the hologram. The advantages of the method are high numerical aperture (this means high spatial resolution), detection of the 3D shape, and a lensless imaging system. Experimental results are presented.

A two-wavelength method for a fast shape measurement by use of a pulsed ruby laser is presented. The wavelength change is produced by alteration of the distance between the plates of the laser’s output etalon. One plate of the etalon is mounted on a vibrating piezoelectric element; this allows a fast wavelength change. Two holograms at different wavelengths are recorded in a few microseconds by use of a CCD. The holograms are reconstructed digitally, and the wave-front phase is calculated. The shape is obtained by subtraction of the phases of the wave fronts recorded at different wavelengths. Environmental disturbances at low frequencies, such as air turbulence, vibrations, and object drift, have no influence on the measurement. Experimental results are presented.

We describe a method where the wavefront emitted by a self-luminous object is superimposed to its filtered counterpart by using a Mach–Zehnder interferometer. The amplitude and phase of the resulting interference pattern is used for digital three-dimensional imaging. Experimental results are presented.

A method for recording and evaluating digital image-plane holograms is presented. Hundreds of holograms of an object that has been subjected to dynamic deformation (e.g., vibrations) are recorded. The phase of the wave front is calculated from the recorded holograms by use of a two-dimensional digital Fourier-transform method. By temporal phase unwrapping it is possible to determine the absolute deformation (included the direction of motion) of the object. Experimental results are presented, and the advantages of temporal phase unwrapping compared with spatial phase unwrapping are discussed.

Surface relief gratings and refractive index gratings are formed by direct holographic recording in amorphous chalcogenide nanomultilayer structures ${\mathrm{As}}_2{\mathrm{S}}_3-\mathrm{Se}$ and thin films ${\mathrm{As}}_2{\mathrm{S}}_3$. The evolution of the grating parameters, such as the modulation of refractive index and relief depth in dependence of the holographic exposure, is investigated. Off-axis digital holographic microscopy is applied for the measurement of the photoinduced phase gratings. For the high-accuracy reconstruction of the wavefront (amplitude and phase) transmitted by the fabricated gratings, we used a computational technique based on the sparse modeling of phase and amplitude. Both topography and refractive index maps of recorded gratings are revealed. Their separated contribution in diffraction efficiency is estimated.