Actively articulated wheel-on-leg rovers offer high degrees of mobility for traversing unstructured and scientifically interesting terrain. An ability to actively conform to the terrain to increase traversability is sought. A kinematic model based on recursive kinematic propagation in combination with a terrain map generated online is used to solve desired limb articulation angles that meet operator defined rover body trajectories. This technique is validated in field tests on a Martian analog terrain.
This paper presents a methodology for mapping and localization of Unmanned Aerial Vehicles (UAVs) based on the integration of sensors from different modalities. Particularly, we integrate distance estimations to Ultra-Wideband (UWB) sensors and 3D point-clouds from RGB-D sensors. First, a novel approach for environment mapping is introduced, exploiting the synergies between UWB sensors and point-clouds to produce a multi-modal 3D map that integrates the estimated UWB sensors position. This map is further integrated into a Monte Carlo Localization method to robustly estimate the UAV pose. Finally, the full approach is tested with real indoor flights and validated with a motion tracking system.
Unmanned Aerial Vehicles (UAVs) exhibit great agility and usually require a trained pilot to operate them, while being restricted to line-of-sight range. This prevents their wide introduction in applications such as inspection for disaster scenarios. Our goal is to enable rescue teams untrained in piloting to teleoperate a UAV as an aid to their mission, while being able to focus on the task at hand. The assisted teleoperation of a small UAV is presented in this work, within a framework to perform localization and state estimation of the UAV without any external positioning system (e.g. GPS) and perform autonomous local obstacle avoidance. The computational efficiency of the whole processing pipeline allows for real-time operation. Field experiments have been conducted in a realistic mock-up using an indoor testbed with a very accurate tracking system in order to validate the algorithms.
1 September 2017 in International Journal of Advanced Robotic Systems
This article presents an enhanced version of the Monte Carlo localization algorithm, commonly used for robot navigation in indoor environments, which is suitable for aerial robots moving in a three-dimentional environment and makes use of a combination of measurements from an Red,Green,Blue-Depth (RGB-D) sensor, distances to several radio-tags placed in the environment, and an inertial measurement unit. The approach is demonstrated with an unmanned aerial vehicle flying for 10 min indoors and validated with a very precise motion tracking system. The approach has been implemented using the robot operating system framework and works smoothly on a regular i7 computer, leaving plenty of computational capacity for other navigation tasks such as motion planning or control.