A Density Functional Theory based simulation study on cubic crystal orientation dependent transition metal contact with monolayer MoS 2 /WS 2 in reference to exchange energy, density of states and thermodynamic entropy measurements are studied. Exchange energy states the stability of the interfaces between MoS 2 /WS 2 and transition metals. The density of states calculation reveals the transport dominance with respect to charge polarity (electron or hole) and magnitude of charge flow through the interface. Entropy gives an alternative view to analyse carrier-phonon scattering at the interface. Our calculations suggest that (100) and (111) orientated transition metals from 3d group like Sc, Ti, Cr, Co, and Ni, (110) orientated transition metals from 4d group like Tc, Pd, Zr, and Ag and from 5d group (100), (110) orientated elements like Ta, W, Os, Ir, Pt are better suited for elemental contact applications in MoS 2 and WS 2 channel-based CMOS logic FETs.
1 June 1993 in Propellants, Explosives, Pyrotechnics
In this work, the numerical simulation of a SiGe heterojunction bipolar transistor (HBT) for DC and AC performance operating at cryogenic temperature with a hydrodynamic carrier transport model is analyzed. A new modified temperature-dependent Si1−xGex energy bandgap model was used. Using a simplified 2D TCAD design structure, the device characteristics on 55 nm SiGe HBT technology and the mobility model are calibrated with experimental data. Base current reversal due to induced impact-ionization at the collector-base junction is analyzed, where the estimated collector-emitter breakdown voltage with the base open (BVCEO) is 1.48 V at 300 K. This reveals good voltage handling ability. At cryogenic temperatures, dopant incomplete ionization in the lightly doped collector region shows a 28% decrease in ionized dopant concentration at 50 K; this affects the base-collector depletion capacitance. The emitter electron barrier tunneling leakage on collector current is studied using a non-local e-barrier tunneling model at different temperatures that shows an improvement in peak DC gain at lower temperatures. Using the small-signal ac analysis, the cut-off frequency and the maximum oscillation frequency are extracted for high-frequency application, and the base widening effect is discussed. A comparison of this work with measured data on 90 nm SiGe HBT is also discussed in brief, which shows improvements in the simulated structure.