Coal production in opencast mining generates substantial waste materials, which are typically delivered to an on-site waste dump. As a large artificial loose pile, such dumps have a special multi-berm structure accompanied by some security issues due to wind and water erosion. Highly accurate digital surface models (DSMs) provide the basic information for detection and analysis of elevation change. Low-cost unmanned aerial vehicle systems (UAS) equipped with a digital camera have become a useful tool for DSM reconstruction. To achieve high-quality UAS products, consideration of the number and configuration of ground control points (GCPs) is required. Although increasing of GCPs will improve the accuracy of UAS products, the workload of placing GCPs is difficult and laborious, especially in a multi-berm structure such as a waste dump. Thus, the aim of this study is to propose an improved GCPs configuration to generate accurate DSMs of a waste dump to obtain accurate elevation information, with less time and fewer resources. The results of this study suggest that: (1) the vertical accuracy of DSMs is affected by the number of GCPs and their configuration. (2) Under a set number of GCPs, a difference of accuracy is obtained when the GCPs are located on different berms. (3) For the same number of GCPs, the type 4 (GCPs located on the 1st and 4th berms) in the study is the best configuration for higher vertical accuracy compared with other types. The principal objective of this study provides an effective GCP configuration for DSM construction of coal waste dumps with four berms, and also a reference for engineering piles using multiple berms.
The spontaneous combustion of coal gangue dumps after reclamation causes severe harm to the ecological environment surrounding mining areas. Using remote sensing technology to determine vegetation heat stress levels is an important way to evaluate the probability of a spontaneous combustion disaster. The canopy spectra and chlorophyll fluorescence (ChlF) parameters of alfalfa were collected through pot experiments to simulate different heat stress levels. Time series analyses of three ChlF (chlorophyll fluorescence) parameters showed that the regularity of the quantum efficiency of photosystem II (PSII) in light-adapted conditions () was stronger during the monitoring period. The correlation coefficients between the three ChlF parameters and the canopy raw spectrum, first derivative spectrum, and vegetation indices were calculated, and the spectral features were found to be more correlated. Lasso regression was used to further screen spectral features, and the optimal spectral features were the raw spectral value at 741 nm (abbreviated as RS (741)) and NDVI (652, 671). To discriminate among heat stress levels accurately and automatically, we built a time convolution neural network. The classification results showed that when the sequence length is 3, the heat stress is divided into three categories, and the model obtains the highest accuracy. In combination with relevant research conclusions on the temperature distribution law of spontaneous combustion in coal gangue dumps, three heat stress levels can be used to assess the potential of spontaneous combustion in coal gangue dumps after reclamation. The research results provide an important theoretical basis and technical support for early warnings regarding spontaneous combustion disasters in reclaimed coal gangue dumps.