This paper proposes an integrated positioning algorithm for mobile devices and achieves long-term and high-accuracy indoor pedestrian tracking under severe non-Line-of-Sight (NLOS) scenarios. The traditional fusion method for hand-held devices lacks zero-speed correction and cannot clear the accumulated error of the Pedestrian Dead Reckoning (PDR). Secondly, the PDR algorithm also requires user privacy data for high positioning accuracy. Hence, we propose a customized model with acoustic and PDR through self-updating parameters with two novel fusing strategies: Kalman Filter with Least-Square (KFLS) and Kalman Filter with Bayesian Parameter Estimation (KFBPE), which utilize numerical feedback and Bayesian distribution, respectively. Experiments with Huawei Mate 9 show that both methods above can effectively eliminate the outlier resulting from severe signal loss, regardless of hand-holding gestures, with no individual privacy data required. Extensive experimental results demonstrate that the proposed methods are more efficient for NLOS and perform much better than the baselines of traditional fusion frameworks like the standard Kalman Filter. KFBPE has a relatively smoother tracking result, which guarantees an average positioning accuracy of up to 25 cm under the circumstance of nearly thirty percent acoustic signal loss (or NLOS) at the same time.
With the emergence of COVID-19, social distancing detection is a crucial technique for epidemic prevention and control. However, the current mainstream detection technology cannot obtain accurate social distance in real-time. To address this problem, this paper presents a first study on smartphone-based social distance detection technology based on near-ultrasonic signals. Firstly, according to auditory characteristics of the human ear and smartphone frequency response characteristics, a group of 18 kHz–23 kHz inaudible Chirp signals accompanied with single frequency signals are designed to complete ranging and ID identification in a short time. Secondly, an improved mutual ranging algorithm is proposed by combining the cubic spline interpolation and a two-stage search to obtain robust mutual ranging performance against multipath and NLoS affect. Thirdly, a hybrid channel access protocol is proposed consisting of Chirp BOK, FDMA, and CSMA/CA to increase the number of concurrencies and reduce the probability of collision. The results show that in our ranging algorithm, 95% of the mutual ranging error within 5 m is less than 10 cm and gets the best performance compared to the other traditional methods in both LoS and NLoS. The protocol can efficiently utilize the limited near-ultrasonic channel resources and achieve a high refresh rate ranging under the premise of reducing the collision probability. Our study can realize high-precision, high-refresh-rate social distance detection on smartphones and has significant application value during an epidemic.
High-accuracy time of arrival (TOA) estimation is essential for indoor acoustic localization, but traditional TOA estimation methods often fail to obtain accurate and robust TOA estimation performance due to severe multipath challenges, such as peak extraction by general cross correlation (GCC). To address the problem, this article presents a novel acoustic TOA estimation technique called FDME-RATE, a high-accuracy acoustic ranging system. The proposed method utilizes GCC to determine the coarse signal arrival time, followed by an enhanced frequency modulated continuous wave (FMCW) technique to convert the various arrival paths into distinct frequencies within the spectrum. In addition, we employ an adaptive multiple signal classification (AMUSIC) algorithm to achieve high-resolution TOA estimation. Through simulations and experiments conducted in a reverberant corridor, the results indicate that our method achieves an average TOA ranging error of just 0.16 and 0.19 m at the 95% confidence level across a 30-m span. Within a 20-m range, there is only a centimeter-level error. Additionally, in non line-of-sight (NLOS) scenarios, our proposed method further enhances TOA-based ranging accuracy by an additional 0.3 m over the same distance. The experimental results also demonstrate that our method outperforms traditional methods and recent research in terms of both estimation accuracy and robustness.
In severely reverberant indoor environments, acoustic Time-of-Arrival (TOA) localization on commercial smartphones is prone to multipath-induced bias and unreliable ranging. This article presents a Bluetooth Angle-of-Arrival (AOA)–assisted spatiotemporal multipath suppression framework for acoustic TOA estimation. First, a soft conic geometric prior is constructed from AOA, and the associated angular uncertainty is mapped to the distance–time domain to enable temporal gating that preserves the direct-path component while suppressing late reverberation. Second, a Gaussian-mixture intensity prior is established using the Received Signal Strength Indication (RSSI). By inverting the Log-Distance Path Loss (LDPL) model with variance propagation, a distance–time distribution is derived and intersected with the AOA reachability bound to form a Bayesian Geometric TOA window (BG-TOA), followed by soft gating to attenuate outlier paths. Finally, under BG-TOA constraints, the joint covariance is updated online and eigenvector-based spatial filtering is performed to enhance the direct path and suppress multipath clusters, yielding the earliest consistent TOA estimate. Field experiments in an office and a large indoor space achieve mean static and dynamic localization errors of 0.11 m and 0.13 m, respectively, substantially outperforming single-sensor baselines and conventional fusion methods. The proposed framework is fully compatible with existing smartphone hardware, offering low cost and deployment simplicity.
Conventional acoustic time-of-arrival (TOA) estimation in complex indoor environments is highly susceptible to multipath reflections and occlusions, resulting in unstable measurements and limited physical interpretability. This paper presents a smartphone-based indoor localization method built on vision-assisted acoustic channel modeling, and develops a fusion anchor integrating a pan–tilt–zoom (PTZ) camera and a near-ultrasonic signal transmitter to explicitly perceive indoor geometry, surface materials, and occlusion patterns. First, vision-derived priors are constructed on the anchor side based on line-of-sight reachability, orientation consistency, and directional risk, and are converted into soft anchor weights to suppress the impact of occlusion and pointing mismatch. Second, planar geometry and material cues reconstructed from camera images are used to generate probabilistic room impulse response (RIR) priors that cover the direct path and first-order reflections, where environmental uncertainty is mapped into path-dependent arrival-time variances and prior probabilities. Finally, under the RIR prior constraints, a path-wise posterior distribution is built from matched-filter outputs, and an adaptive fusion strategy is applied to switch between maximum a posteriori (MAP) and minimum mean square error (MMSE) estimators, yielding debiased TOA measurements with calibratable variances for downstream localization filters. Experiments in representative complex indoor scenarios demonstrate mean localization errors of 0.096 m and 0.115 m in static and dynamic tests, respectively, indicating improved accuracy and robustness over conventional TOA estimation.