The catalytic activity of SrPdO3 perovskite, prepared by the sol-combustion citrate method, for the hydrazine oxidation has been investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The strong acidic condition is essential for the high catalyst performance, where five-protons mechanism is verified. The calculated value of the diffusion coefficient from kinetics data is 8.01 × 10−6 cm2 s−1. The proposed sensor exhibits a high sensitivity, 2.1 × 103 μA μmol−1 L, excellent selectivity and reproducibility, high operating and storage stability. The calculated limit of detection (LOD) for hydrazine is 8.3 × 10−2 nmol L−1. Impedance study showed that, in the presence of SrPdO3, the charge-transfer resistance (RCT) is decreased by a factor of 100, compared to that of bare electrode, indicating the high catalytic activity of SrPdO3 for the hydrazine electro-oxidation. This can be attributed to the highly dispersed nano-palladium sites within the perovskite matrix.
1 October 2019 in Journal of Electroanalytical Chemistry
Nano-conducting copolymers of aniline (ANI) and pyrrole (Py) with silica of different starting monomer ratios are prepared by oxidative chemical polymerization. X-ray diffraction (XRD) data showed that polyaniline (PANI) is the predominant phase in copolymer composites with a higher starting ANI monomer ratio while polypyrrole (PPy) is the major phase for other prepared samples. Transmission and scanning electron microscope images ascertained XRD results where hexagonal-shaped particles are assigned to PANI/SiO2 and poly(9ANI-co-1Py)/SiO2 samples; the cauliflower morphology can be observed for PPy/SiO2, poly(1ANI-co-9Py)/SiO2, poly(1ANI-co-2Py)/SiO2, and poly(1ANI-co-1Py)/SiO2 samples. One-dimensional nano-fibers can be obtained by using a starting monomer ratio of 2ANI:1Py during synthesis. Thermal analysis showed that copolymerization increases the thermal stability as compared with PANI/SiO2 and PPy/SiO2 composites. All prepared samples were applied as sorbents for Congo red dye from aqueous solutions. It was found that the sorption capacity value was affected by the starting monomer ratio; poly(2ANI-co-1Py)/SiO2 has the highest sorption capacity; the qm value is 142.9 mg g−1 due to its highly-stabilized nano-structure.
Corrosion of metals is a serious environmental problem. Most of the corrosion inhibitors are synthetic chemicals that are hazardous to environments and expensive. Today, there has been an increasing search for green corrosion inhibitors, due to the toxicity of some inhibitors. Green corrosion inhibitors are biodegradable and free of heavy metals or other toxic compounds. There is an intensive effort underway to develop new plant origin corrosion inhibitors for metal subjected to various environmental conditions. Salts of rare earth elements can be also used as inorganic alternative nontoxic corrosion inhibitors. Sol-gel coatings can be recommended as green protective films for metal corrosion. The origin of sol-gel process, its advantages and limitations, and the type of coating method are presented in this chapter, as well as a brief summary of recent literature concerning the use of hybrid inorganic-organic sol-gel and nanostructured sol-gel protective coatings for metal corrosion in different media.