This study used a simple and efficient dipping method to prepare oleophilic calcium stearate-coated kapok fibers (CaSt2-KF) with improved hydrophobicity. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) confirmed the deposition of calcium stearate particles on the surface of the kapok fibers. This led to higher surface roughness and improved static water contact angle of 137.4°. The calcium stearate-coated kapok fibers exhibited comparable sorption capacities for kerosene, diesel, and palm oil. However, the highest sorption capacity of 59.69 g/g was observed for motor oil at static conditions. For motor oil in water, the coated fibers exhibited fast initial sorption and a 65% removal efficiency after 30 s. At equilibrium, CaSt2-KF attained a sorption capacity of 33.9 g/g and 92.5% removal efficiency for motor oil in water. The sorption kinetics of pure motor oil and motor oil in water follows the pseudo-second-order kinetic model, and the Elovich model further described chemisorption. Intraparticle diffusion and liquid film diffusion were both present, with the latter being the predominant diffusion mechanism during motor oil sorption.
1 December 2019 in Materials Chemistry and Physics
The effects of thermal modification on the resistance of Dendrocalamus asper against Microcerotermes losbañosensis were investigated after exposure to virgin coconut oil at 140–200 °C for 30–120 min. The results showed that heat treatment significantly improved bamboo’s resistance to termites based on mass losses and visual observations. The enhancement was highest at 200 °C. Prolonged treatment had a positive effect on the resistance at lower temperatures only.
1 March 2019 in Journal of Science: Advanced Materials and Devices
Kapok fiber has been known for its hydrophobic-oleophilic characteristics and exhibits a great potential as oil sorbent. Methods in enhancing its hydrophobicity have been explored to improve its sorption performance in oil-in-water applications. This study investigates the oil sorption performance and hydrophobicity of kapok fibers coated with calcium stearate, a known waterproofing agent. The calcium stearate solution was prepared by mixing known amounts of stearic acid and calcium chloride in an ethanol solution. This was followed by hydrolysis using 0.12 M sodium hydroxide solution. The calcium stearate-coated kapok fibers exhibited higher hydrophobicity compared to raw kapok fibers with a water contact angle of ~137°. It achieved the highest oil sorption capacity and reusability of 50 g/g and 65% for viscous motor oil, respectively.